View 2-87631-5_6362040.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

181 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv receptacle assemblies, single-row, outrigger design .100 x .100 [2.54 x 2.54] centerline, end to end stackable ampmodu interconnection system vertical mount, receptacle assemblies 5 no. of dimensions contact plating/part nos. pos. a b plating a plating b plating c 3 .300 [7.62] .200 [5.08] 5-147720-2 5-147726-2 5-147727-2 4 .400 [10.16] .300 [7.62] 5-147720-3 5-147726-3 5-147727-3 5 .500 [12.70] .400 [10.16] 5-147720-4 5-147726-4 5-147727-4 6 .600 [15.24] .500 [12.70] 5-147720-5 5-147726-5 5-147727-5 7 .700 [17.78] .600 [15.24] 5-147720-6 5-147726-6 5-147727-6 8 .800 [20.32] .700 [17.78] 5-147720-7 5-147726-7 5-147727-7 9 .900 [22.86] .800 [20.32] 5-147720-8 5-147726-8 5-147727-8 10 1.000 [25.40] .900 [22.86] 5-147720-9 5-147726-9 5-147727-9 11 1.100 [27.94] 1.000 [25.40] 6-147720-0 6-147726-0 6-147727-0 12 1.200 [30.48] 1.100 [27.94] 6-147720-1 6-147726-1 6-147727-1 13 1.300 [33.02] 1.200 [30.48] 6-147720-2 6-147726-2 6-147727-2 14 1.400 [35.56] 1.300 [33.02] 6-147720-3 6-147726-3 6-147727-3 15 1.500 [38.10] 1.400 [35.56] 6-147720-4 6-147726-4 6-147727-4 16 1.600 [40.64] 1.500 [38.10] 6-147720-5 6-147726-5 6-147727-5 17 1.700 [43.18] 1.600 [40.64] 6-147720-6 6-147726-6 6-147727-6 18 1.800 [45.72] 1.700 [43.18] 6-147720-7 6-147726-7 6-147727-7 19 1.900 [48.26] 1.800 [45.72] 6-147720-8 6-147726-8 6-147727-8 20 2.000 [50.80] 1.900 [48.26] 7-147720-8 7-147726-8 7-147727-8 30 3.000 [76.20] 2.900 [73.66] 8-147720-8 8-147726-8 8-147727-8 40 4.000 [101.60] 3.900 [99.06] 8-147720-9 8-147726-9 8-147727-9 notes: 1. tyco electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. to obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in bottom entry application. material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated plating a ? duplex .000030 [0.00076] gold on contact area, .000150-0.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel .245 [6.22] .140 [3.56] .075 +.005 -.000 [ 1.90 +0.13 ] -.000 .140 [3.56] .125.010 [3.170.25] ty p. recommended pc board hole layout .020 [0.51] (standoffs) b .100 [2.54] ty p. .053 [1.34] ty p. .200 [5.08] .035.003 [0.890.08] dia. .200.003 [5.080.08] ty p. .100 [2.54] ty p. a dual entry, end stackable, low profile, .100 x .100 [2.54 x 2.54] centerline, .200 [5.08] tine spacing .107 [2.72] (localized gold plate area) .148 [3.77] ty p. point of contact note: all part numbers are rohs compliant.
182 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv receptacle assemblies, double-row, outrigger design, .100 x .100 [2.54 x 2.54] centerline, end to end stackable ampmodu interconnection system note: all part numbers are rohs compliant. vertical mount, receptacle assemblies 5 no. of dimensions contact plating/part nos. pos. a b plating a plating b plating c 2 .100 [2.54] ? 6-534267-3 5-147099-1 8-147100-9 4 .200 [5.08] .100 [2.54] 6-534267-7 5-147099-2 9-147100-0 6 .300 [7.62] .200 [5.08] 6-534267-4 5-147099-3 5-147100-1 8 .400 [10.16] .300 [7.62] 5-534267-5 5-147099-4 5-147100-2 14 .700 [17.78] .600 [15.24] 5-534267-1 5-147099-7 5-147100-5 18 .900 [22.86] .800 [20.32] 6-534267-0 5-147099-9 5-147100-7 20 1.000 [25.40] .900 [22.86] 5-534267-2 6-147099-0 5-147100-8 24 1.200 [30.48] 1.100 [27.94] 5-534267-9 6-147099-2 6-147100-0 30 1.500 [38.10] 1.400 [35.56] 6-534267-2 6-147099-5 6-147100-3 36 1.800 [45.72] 1.700 [43.18] 6-534267-5 6-147099-8 6-147100-6 40 2.000 [50.80] 1.900 [48.26] 5-534267-7 7-147099-0 6-147100-8 48 2.400 [60.96] 2.300 [58.42] 6-534267-1 7-147099-4 7-147100-2 50 2.500 [63.50] 2.400 [60.96] 6-534267-8 7-147099-5 7-147100-3 60 3.000 [76.20] 2.900 [73.66] 5-534267-8 8-147099-0 7-147100-8 76 3.800 [96.52] 3.700 [93.98] 6-534267-6 8-147099-8 8-147100-6 80 4.000 [101.60] 3.900 [99.06] 5-534267-4 9-147099-0 8-147100-8 notes: 1. tyco electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. to obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry application. material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel related product data mateable headers ? refer to the mating post selection guide ? page 90 performance characteristics ? page 174 technical documents ? page 276 product specification 108-25022 application specification 114-25018 additional receptacle assembly sizes are available; minimum order quantities may apply. consult tyco electronics. part no. 86286-1 (plugs into receptacle contact) material ? natural color nylon dual entry, end stackable, low profile, .100 x .100 [2.54 x 2.54] centerline, .300 [7.62] tine spacing .245 [6.22] ty p. .300 [7.62] ty p. a .100.003 [2.540.08] .125.010 [3.170.25] .050 [1.27] max. ty p. recommended pc board hole layout .035 .003 [0.89 0.08 ] .020 [0.51] (standoffs) b dia. ty p. .100 [2.54] ty p. .100 [2.54] ty p. .100 [2.54] ty p. .148 [3.77] ty p. .100 [2.54] ty p. .100 [2.54] ty p. .198 [5.03] dia. ty p. .075 +.005 .060 -0.00 1.90 +0.13 -0.00 [ ] keying plug .107 [2.72] ty p. (localized gold plate area) point of contact
183 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod. iv receptacle assemblies, double-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system vertical mount, receptacle assemblies 5 material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel related product data mateable headers ? refer to the mating post selection guide ? page 90 performance characteristics ? page 174 technical documents ? page 276 product specification 108-25022 application specification 114-25018 closed dual entry, side and end stackable low profile, .100 x .100 [2.54 x 2.54] centerline, .150 [3.81] tine spacing .100.003 [2.540.08] .245 [6.22] ty p. .020 [0.51] ty p. (standoffs) a .198 [5.03] .050 [1.27] max. ty p. .150 [3.81] ty p. .130.010 [3.300.25] ty p. .148 [3.77] ty p. point of contact .107 [2.72] ty p. (localized gold plate area) no. of dimensions contact plating/part nos. pos. a b plating a plating b plating c 2 .100 [2.54] ? 5-535542-1 5-147095-1 5-147096-1 4 .200 [5.08] .100 [2.54] 5-535542-2 5-147095-2 5-147096-2 6 .300 [7.62] .200 [5.08] 5-535542-3 5-147095-3 5-147096-3 8 .400 [10.16] .300 [7.62] 5-535542-4 5-147095-4 5-147096-4 10 .500 [12.70] .400 [10.16] 5-535542-5 5-147095-5 5-147096-5 12 .600 [15.24] .500 [12.70] 5-535542-6 5-147095-6 5-147096-6 14 .700 [17.78] .600 [15.24] 5-535542-7 5-147095-7 5-147096-7 16 .800 [20.32] .700 [17.78] 5-535542-8 5-147095-8 5-147096-8 18 .900 [22.86] .800 [20.32] 5-535542-9 5-147095-9 5-147096-9 20 1.000 [25.40] .900 [22.86] 6-535542-0 6-147095-0 6-147096-0 22 1.100 [27.94] 1.000 [25.40] 6-535542-1 6-147095-1 6-147096-1 24 1.200 [30.48] 1.100 [27.94] 6-535542-2 6-147095-2 6-147096-2 26 1.300 [33.02] 1.200 [30.48] 6-535542-3 6-147095-3 6-147096-3 28 1.400 [35.56] 1.300 [33.02] 6-535542-4 6-147095-4 6-147096-4 30 1.500 [38.10] 1.400 [35.56] 6-535542-5 6-147095-5 6-147096-5 32 1.600 [40.64] 1.500 [38.10] 6-535542-6 6-147095-6 6-147096-6 34 1.700 [43.18] 1.600 [40.64] 6-535542-7 6-147095-7 6-147096-7 36 1.800 [45.72] 1.700 [43.18] 6-535542-8 6-147095-8 6-147096-8 38 1.900 [48.26] 1.800 [45.72] 6-535542-9 6-147095-9 6-147096-9 40 2.000 [50.80] 1.900 [48.26] 7-535542-0 7-147095-0 7-147096-0 notes: 1. tyco electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. to obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot- tom entry application. .100 [2.54] .100* [2.54] ty p. .100 [2.54] ty p. b recommended pc board hole layout for bottom entry or pass through applications *.003 [0.08] tolerances not to accumulate within one connector pattern. recommended pc board hole layout for top entry .035.003 [0.890.08] dia. typ. b dia. ty p. .075 +.005 .060 -.000 1.90 +0.13 - 0.00 [ ] .100 [2.54] ty p. .150 [3.81] ty p. note: all part numbers are rohs compliant.
184 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod. iv receptacle assemblies, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. vertical mount, receptacle assemblies 5 no. of dimensions contact plating/part nos. pos. a b plating a plating b plating c 42 2.100 [53.34] 2.000 [50.80] 7-535542-1 7-147095-1 7-147096-1 44 2.200 [55.88] 2.100 [53.34] 7-535542-2 7-147095-2 7-147096-2 46 2.300 [58.42] 2.200 [55.88] 7-535542-3 7-147095-3 7-147096-3 48 2.400 [60.96] 2.300 [58.42] 7-535542-4 7-147095-4 7-147096-4 50 2.500 [63.50] 2.400 [60.96] 7-535542-5 7-147095-5 7-147096-5 52 2.600 [66.04] 2.500 [63.50] 7-535542-6 7-147095-6 7-147096-6 54 2.700 [68.58] 2.600 [66.04] 7-535542-7 7-147095-7 7-147096-7 56 2.800 [71.12] 2.700 [68.58] 7-535542-8 7-147095-8 7-147096-8 58 2.900 [73.66] 2.800 [71.12] 7-535542-9 7-147095-9 7-147096-9 60 3.000 [76.20] 2.900 [73.66] 8-535542-0 8-147095-0 8-147096-0 62 3.100 [78.74] 3.000 [76.20] 8-535542-1 8-147095-1 8-147096-1 64 3.200 [81.28] 3.100 [78.74] 8-535542-2 8-147095-2 8-147096-2 66 3.300 [83.82] 3.200 [81.28] 8-535542-3 8-147095-3 8-147096-3 68 3.400 [86.36] 3.300 [83.82] 8-535542-4 8-147095-4 8-147096-4 70 3.500 [88.90] 3.400 [86.36] 8-535542-5 8-147095-5 8-147096-5 72 3.600 [91.44] 3.500 [88.90] 8-535542-6 8-147095-6 8-147096-6 74 3.700 [93.98] 3.600 [91.44] 8-535542-7 8-147095-7 8-147096-7 76 3.800 [96.52] 3.700 [93.98] 8-535542-8 8-147095-8 8-147096-8 78 3.900 [99.06] 3.800 [96.52] 8-535542-9 8-147095-9 8-147096-9 80 4.000 [101.60] 3.900 [99.06] 9-535542-0 9-147095-0 9-147096-0
185 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv surface mount vertical receptacle assemblies, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system 5 surface mount receptacle assemblies the ampmodu 0.025 [0.64] square interconnection system is an industry standard that has provided level iii and iv thru-hole interconnections to almost every industry and marketplace for years. as technology advances, so has the ampmodu product line. surface mount vertical receptacle assemblies are available to meet your level ii packaging needs as process technologies evolve from wave soldering to surface mount reflow (infrared and vapor-phase) processes. ampmodu surface mount receptacle assemblies are offered in vertical dual entry configurations. these receptacles are available in single-row and double-row configurations with a contact centerline spacing of .100 x .100 [2.54 x 2.54]. ampmodu surface mount vertical receptacle assemblies continue to provide the proven features and benefits of their thru-hole counterparts in the ampmodu product family. closed-entry style housing design provides a lead-in ramp for positive mating of contacts, virtually eliminating the possibility of stubbing. the dual-beam receptacle contact design, coupled with gold plating in the contact area, provides a reliable interface. tin plating on the solder tails also enhances solderability. the incorporation of compliant metallic hold downs on receptacle assemblies offers multiple benefits. the hold downs provide for proper lead-to- pad registration and provide retention to the pc board prior to and during processing. used with a plated thru-hole, the hold downs are soldered during the reflow process and serve as a strain relief for the solder joints during mating/unmating. the design of the hold downs results in an excellent ratio of insertion/extraction forces (into the pc board); 20 lb. [89 n] maximum insertion force per pair and 10 lb. [44.5 n] minimum extraction force per pair (unsoldered). no tools are required for insertion. product facts surface mount leads contact material: phosphor bronze high temperature, black thermoplastic housings, 94v-0 rated, capable of withstanding ir or vapor- phase reflow gold/tin duplex plating for reliable mating interconnection and solder interface metallic hold downs provide retention in the pc board prior to and during the reflow process ? and strain relief after soldering hold downs provide for proper lead-to-pad registration closed-entry receptacle housings provide lead-in ramp for positive mating receptacle contacts employ dual cantilever beams for reliable connections recognized under the component program of underwriters laboratories inc. file no. e28476 certified by canadian standards association, file no. lr 7189 r r
186 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv surface mount vertical receptacle assemblies, .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system surface mount receptacle assemblies 5 performance specifications voltage rating: 250 vac current rating: 3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized operating temperature range (receptacle assemblies): ?65c to +125c operating temperature range (headers): -65c to +105c dielectric withstanding voltage: 750 vac termination resistance: 12 milliohms (max.) insulation resistance: 5000 megohms (min.) mating force (receptacle assemblies): 9.0 oz. [2.50n] (max.) per contact unmating force (receptacle assemblies): 1.5 oz. [0.42n] (min.) per contact durability: tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
187 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv receptacle assemblies, single-row, surface mount, .100 [2.54] centerline with compliant pin hold downs ampmodu interconnection system note: all part numbers are rohs compliant. surface mount receptacle assemblies 5 surface mount, single-row, dual entry with compliant pin holddowns material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel related product data mateable headers ? refer to mating post selection guide ? page 90 performance specifications ? page 186 .265 [6.73] ty p. .038 [0.97] .020 [0.51] .030 0.76 .025 [ 0.64 ] ty p. .140 [3.56] .100 [2.54] ty p. .107 [2.72] (localized gold plate area) .208 [5.28] max. (depressed) .148 [3.77] point of contact d c a d b c p.c. board .069 [1.75] .090 [2.28] ty p. .060 [1.52] min. .100 [2.54] .040.003 [1.020.08] dia. typ. (for bottom entry or pass thru applica- tions) .042.003 [1.070.08] dia. .075 [1.91] .110 [2.79] .228 [5.78] recommended pc board pad pattern (.008 [0.20] thick stencil) packaged in tubes packaged in tape & reel no. of dimensions contact plating/ part nos. contact plating/ part nos. pos. abcd plating a plating b plating c plating a plating b plating c 3 .500 [12.70] .200 [5.08] see note 3 .400 [10.16] 5-147744-1 5-147743-1 5-147742-1 5-147724-1 5-147730-1 5-147731-1 4 .600 [15.24] .300 [7.62] see note 3 .500 [12.70] 5-147744-2 5-147743-2 5-147742-2 5-147724-2 5-147730-2 5-147731-2 5 .700 [17.78] .400 [10.16] see note 3 .600 [15.24] 5-147744-3 5-147743-3 5-147742-3 5-147724-3 5-147730-3 5-147731-3 6 .800 [20.32] .500 [12.70] see note 3 .700 [17.78] 5-147744-4 5-147743-4 5-147742-4 5-147724-4 5-147730-4 5-147731-4 7 .900 [22.86] .600 [15.24] see note 3 .800 [20.32] 5-147744-5 5-147743-5 5-147742-5 5-147724-5 5-147730-5 5-147731-5 8 1.000 [25.40] .700 [17.78] see note 3 .900 [22.86] 5-147744-6 5-147743-6 5-147742-6 5-147724-6 5-147730-6 5-147731-6 9 1.100 [27.94] .800 [20.32] see note 3 1.000 [25.40] 5-147744-7 5-147743-7 5-147742-7 5-147724-7 5-147730-7 5-147731-7 10 1.200 [30.48] .900 [22.86] see note 3 1.100 [27.94] 5-147744-8 5-147743-8 5-147742-8 5-147724-8 5-147730-8 5-147731-8 11 1.300 [33.02] 1.000 [25.40] see note 3 1.200 [30.48] 5-147744-9 5-147743-9 5-147742-9 5-147724-9 5-147730-9 5-147731-9 12 1.400 [35.56] 1.100 [27.94] see note 3 1.300 [33.02] 6-147744-0 6-147743-0 6-147742-0 6-147724-0 6-147730-0 6-147731-0 13 1.500 [38.10] 1.200 [30.48] see note 3 1.400 [35.56] 6-147744-1 6-147743-1 6-147742-1 6-147724-1 6-147730-1 6-147731-1 14 1.600 [40.64] 1.300 [33.02] see note 3 1.500 [38.10] 6-147744-2 6-147743-2 6-147742-2 6-147724-2 6-147730-2 6-147731-2 15 1.700 [43.18] 1.400 [35.56] see note 3 1.600 [40.64] 6-147744-3 6-147743-3 6-147742-3 6-147724-3 6-147730-3 6-147731-3 16 1.800 [45.72] 1.500 [38.10] see note 3 1.700 [43.18] 6-147744-4 6-147743-4 6-147742-4 6-147724-4 6-147730-4 6-147731-4 17 1.900 [48.26] 1.600 [40.64] see note 3 1.800 [45.72] 6-147744-5 6-147743-5 6-147742-5 6-147724-5 6-147730-5 6-147731-5 18 2.000 [50.80] 1.700 [43.18] see note 3 1.900 [48.26] 6-147744-6 6-147743-6 6-147742-6 6-147724-6 6-147730-6 6-147731-6 19 2.100 [53.34] 1.800 [45.72] see note 3 2.000 [50.80] 6-147744-7 6-147743-7 6-147742-7 6-147724-7 6-147730-7 6-147731-7 20 2.200 [55.88] 1.900 [48.26] see note 3 2.100 [53.34] 6-147744-8 6-147743-8 6-147742-8 6-147724-8 6-147730-8 6-147731-8 30 3.200 [81.28] 2.900 [73.66] see note 3 3.100 [78.74] 7-147744-8 7-147743-8 7-147742-8 7-147724-8 7-147730-8 7-147731-8 40 4.300 [109.22] 4.100 [104.14] 2.100 [53.34] 4.200 [106.68] 8-147744-8 8-147743-8 8-147742-8 8-147724-8 8-147730-8 8-147731-8 notes: 1. tyco electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. to obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-c ontact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application 3. no center hold down. .042.003 [1.070.08] dia. .042.003 [1.070.08] dia. standoffs ty p.
188 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv receptacle assemblies, single-row, surface mount, .100 [2.54] x .100 [2.54] centerline end to end stackable without compliant pin holddowns ampmodu interconnection system note: all part numbers are rohs compliant. surface mount receptacle assemblies 5 surface mount,single-row, dual entry, end to end stackable material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel related product data mateable headers ? refer to mating post selection guide ? page 90 performance specifications ? page 186 packaged in tubes packaged in tape & reel no. of dimensions contact plating/ part nos. contact plating/ part nos. pos. ab plating a plating b plating c plating a plating b plating c 3 .300 [7.62] .200 [5.08] 5-147738-2 5-147737-2 5-147736-2 5-147723-2 5-147728-2 5-147729-2 4 .400 [10.16] .300 [7.62] 5-147738-3 5-147737-3 5-147736-3 5-147723-3 5-147728-3 5-147729-3 5 .500 [12.70] .400 [10.16] 5-147738-4 5-147737-4 5-147736-4 5-147723-4 5-147728-4 5-147729-4 6 .600 [15.24] .500 [12.70] 5-147738-5 5-147737-5 5-147736-5 5-147723-5 5-147728-5 5-147729-5 7 .700 [17.78] .600 [15.24] 5-147738-6 5-147737-6 5-147736-6 5-147723-6 5-147728-6 5-147729-6 8 .800 [20.32] .700 [17.78] 5-147738-7 5-147737-7 5-147736-7 5-147723-7 5-147728-7 5-147729-7 9 .900 [22.86]] .800 [20.32] 5-147738-8 5-147737-8 5-147736-8 5-147723-8 5-147728-8 5-147729-8 10 1.000 [25.40] .900 [22.86] 5-147738-9 5-147737-9 5-147736-9 5-147723-9 5-147728-9 5-147729-9 11 1.100 [27.94] 1.000 [25.40] 6-147738-0 6-147737-0 6-147736-0 6-147723-0 6-147728-0 6-147729-0 12 1.200 [30.48] 1.100 [27.94] 6-147738-1 6-147737-1 6-147736-1 6-147723-1 6-147728-1 6-147729-1 13 1.300 [33.02] 1.200 [30.48] 6-147738-2 6-147737-2 6-147736-2 6-147723-2 6-147728-2 6-147729-2 14 1.400 [35.56] 1.300 [33.02] 6-147738-3 6-147737-3 6-147736-3 6-147723-3 6-147728-3 6-147729-3 15 1.500 [38.10] 1.400 [35.56] 6-147738-4 6-147737-4 6-147736-4 6-147723-4 6-147728-4 6-147729-4 16 1.600 [40.64] 1.500 [38.10] 6-147738-5 6-147737-5 6-147736-5 6-147723-5 6-147728-5 6-147729-5 17 1.700 [43.18] 1.600 [40.64] 6-147738-6 6-147737-6 6-147736-6 6-147723-6 6-147728-6 6-147729-6 18 1.800 [45.72] 1.700 [43.18] 6-147738-7 6-147737-7 6-147736-7 6-147723-7 6-147728-7 6-147729-7 19 1.900 [48.26] 1.800 [45.72] 6-147738-8 6-147737-8 6-147736-8 6-147723-8 6-147728-8 6-147729-8 20 2.000 [50.80] 1.900 [48.26] 6-147738-9 6-147737-9 6-147736-9 6-147723-9 6-147728-9 6-147729-9 30 3.000 [76.20] 2.900 [73.66] 7-147738-9 7-147737-9 7-147736-9 7-147723-9 7-147728-9 7-147729-9 40 4.000 [101.60] 3.900 [99.06] 8-147738-9 8-147737-9 8-147736-9 8-147723-9 8-147728-9 8-147729-9 notes: 1. tyco electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. to obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application. a b .265 [6.73] .100 [2.54] .228 [5.78] .020 [0.51] standoff typ. .060 [1.52] min. .090 [2.28] .148 [3.77] .208 [5.28] max. .107 [2.72] ty p. .100 [2.54] ty p. .140 [3.56] .040.003 [1.020.08] dia. typ. recommended pc board pad pattern (.008 [0.20] thick stencil) (for bottom entry or pass through applications) (localized gold plate area) point of contact
189 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv surface mount receptacle assemblies, double-row, .100 x .100 [2.54 x 2.54] centers ampmodu interconnection system note: all part numbers are rohs compliant. surface mount receptacle assemblies 5 surface mount,double row, dual entry with holddowns material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel related product data mateable headers ? refer to mating post selection guide ? page 90 performance specifications ? page 186 technical documents ? page 276 product specification 108-25022 application specification 114-25018 additional receptacle assembly sizes are available; minimum order quantities may apply. consult tyco electronics. .100 [2.54] ty p. .050 [1.27] ty p. .198 [5.03] a .020 [0.51] ty p. .265 [6.73] ty p. .083 [2.12] ty p. .266 [6.75] .107 [2.72] ty p. .148 [3.76] ty p. b d c .110 [2.79] ty p. .238 [6.05] ty p. .100 [2.54] ty p. .075 [1.91] ty p. .090 [2.29] ty p. .040.003 [1.020.08] .040.003 [1.020.08] .004 [0.10] ty p. .027.002 [0.690.05] ty p. .060 [1.52] ty p. .040 [1.02] ty p. .100 [2.54] ty p. recommended pc board layout (.008 [0.20] thick stencil) part no. 86286-1 (plugs into receptacle contact) material ? natural color nylon keying plug part no. 86286-1 (plugs into receptacle contact) (for bottom entry or pass thru applications) (localized gold plate area) point of contact
190 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv surface mount receptacle assemblies, double-row, .100 x .100 [2.54 x 2.54] centers (continued) ampmodu interconnection system note: all part numbers are rohs compliant. surface mount receptacle assemblies 5 packaged in tubes packaged in tape and reel no. of dimensions contact plating/part nos. contact plating/part nos. pos. a bcd plating a plating b plating c plating a plating b plating c 10 .700 [17.78] .400 [10.16] .600 [15.24] see note 1 5-147102-5 5-147101-5 5-147103-5 5-147747-5 5-147746-5 5-147745-5 14 .900 [22.86] .600 [15.24] .800 [20.32] see note 1 5-147102-7 5-147101-7 5-147103-7 5-147747-7 5-147746-7 5-147745-7 20 1.200 [30.48] .900 [22.86] 1.100 [27.94] see note 1 6-147102-0 6-147101-0 6-147103-0 6-147747-0 6-147746-0 6-147745-0 22 1.300 [33.02] 1.000 [25.40] 1.200 [30.48] see note 1 6-147102-1 6-147101-1 6-147103-1 6-147747-1 6-147746-1 6-147745-1 26 1.500 [38.10] 1.200 [30.48] 1.400 [35.56] see note 1 6-147102-3 6-147101-3 6-147103-3 6-147747-3 6-147746-3 6-147745-3 30 1.700 [43.18] 1.400 [35.56] 1.600 [40.64] see note 1 6-147102-5 6-147101-5 6-147103-5 6-147747-5 6-147746-5 6-147745-5 34 1.900 [48.26] 1.600 [40.64] 1.800 [45.72] see note 1 6-147102-7 6-147101-7 6-147103-7 6-147747-7 6-147746-7 6-147745-7 36 2.000 [50.08] 1.700 [43.18] 1.900 [48.26] see note 1 6-147102-8 6-147101-8 6-147103-8 6-147747-8 6-147746-8 6-147745-8 40 2.200 [55.88] 1.900 [48.26] 2.100 [53.34] see note 1 7-147102-0 7-147101-0 7-147103-0 7-147747-0 7-147746-0 7-147745-0 46 2.500 [63.50] 2.200 [55.88] 2.400 [60.96] see note 1 7-147102-3 7-147101-3 7-147103-3 7-147747-3 7-147746-3 7-147745-3 50 2.700 [68.58] 2.400 [60.96] 2.600 [66.04] see note 1 7-147102-5 7-147101-5 7-147103-5 7-147747-5 7-147746-5 7-147745-5 62 3.300 [83.82] 3.000 [76.20] 3.200 [81.28] see note 1 8-147102-1 8-147101-1 8-147103-1 8-147747-1 8-147746-1 8-147745-1 64 3.400 [86.36] 3.100 [78.74] 3.300 [83.82] see note 1 8-147102-2 8-147101-2 8-147103-2 8-147747-2 8-147746-2 8-147745-2 66 3.500 [88.90] 3.200 [81.28] 3.400 [86.36] see note 1 8-147102-3 8-147101-3 8-147103-3 8-147747-3 8-147746-3 8-147745-3 70 3.700 [95.98] 3.400 [86.36] 3.600 [91.44] see note 1 8-147102-5 8-147101-5 8-147103-5 8-147747-5 8-147746-5 8-147745-5 80 4.300 [109.22] 3.900 [99.06] 4.200 [106.68] 2.100 [53.34] 9-147102-0 9-147101-0 9-147103-0 9-147747-0 9-147746-0 9-147745-0 notes: 1. no center holddown. 2. to obtain the minimum mating post length, add .020 [0.51] (not in cluding the post lead in c hamfer) to the maximum point-of-co ntact dimension and .062 [1.57] for recommended board thickness in bottom entry applications.
191 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv surface mount receptacle assemblies, double-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. surface mount receptacle assemblies 5 surface mount,double row, dual entry end to end stackable material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating b ? duplex .000010 [0.000254] gold on contact area, .000150-.000300 [0.00381-0.00762] matte tin on solder area all over .000050 [0.00127] nickel plating c ? .000150-.000300 [0.00381-0.00762] tin-lead over .000050 [0.00127] nickel related product data mateable headers ? refer to mating post selection guide ? page 90 performance specifications ? page 186 technical documents ? page 276 product specification 108-25022 application specification 114-25018 additional receptacle assembly sizes are available; minimum order quantities may apply. consult tyco electronics. .050 [1.27] max. .265 [6.73] ty p. a .027.002 [0.690.05] ty p. .020 [0.51] ty p. .060 [1.52] ty p. .100 [2.54] ty p. .100 [2.54] ty p. .238 [6.05] ty p. .100 [2.54] ty p. .266 [6.75] .198.002 [5.030.05] .090 [2.29] .148 [3.76] .107 [2.72] b .040 [1.02] ty p. .100 [2.54] ty p. .004 [0.10] ty p. recommended pc board pad layout (.008 [0.20] thick stencil) (for bottom entry and pass through applications) part no. 86286-1 (plugs into receptacle contact) material ? natural color nylon keying plug part no. 86286-1 (plugs into receptacle contact) (localized gold plate area) point of contact
192 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv surface mount receptacle assemblies, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. surface mount receptacle assemblies 5 packaged in tubes packaged in tape & reel no. of dimensions contact plating/ part nos. contact plating/ part nos. pos. ab plating a plating b plating c plating a plating b plating c 10 .500 [12.70] .400 [10.16] 5-147741-5 5-147740-5 5-147739-5 5-147105-5 5-147104-5 5-147106-5 14 .700 [17.78] .600 [15.24] 5-147741-7 5-147740-7 5-147739-7 5-147105-7 5-147104-7 5-147106-7 20 1.000 [25.40] .900 [22.86] 6-147741-0 6-147740-0 6-147739-0 6-147105-0 6-147104-0 6-147106-0 22 1.100 [27.94] 1.000 [25.40] 6-147741-1 6-147740-1 6-147739-1 6-147105-1 6-147104-1 6-147106-1 26 1.300 [33.02] 1.200 [30.48] 6-147741-3 6-147740-3 6-147739-3 6-147105-3 6-147104-3 6-147106-3 30 1.500 [38.10] 1.400 [35.56] 6-147741-5 6-147740-5 6-147739-5 6-147105-5 6-147104-5 6-147106-5 34 1.700 [43.18] 1.600 [40.64] 6-147741-7 6-147740-7 6-147739-7 6-147105-7 6-147104-7 6-147106-7 36 1.800 [45.72] 1.700 [43.18] 6-147741-8 6-147740-8 6-147739-8 6-147105-8 6-147104-8 6-147106-8 40 2.000 [50.80] 1.900 [48.26] 7-147741-0 7-147740-0 7-147739-0 7-147105-0 7-147104-0 7-147106-0 46 2.300 [58.42] 2.200 [55.88] 7-147741-3 7-147740-3 7-147739-3 7-147105-3 7-147104-3 7-147106-3 50 2.500 [63.50] 2.400 [60.96] 7-147741-5 7-147740-5 7-147739-5 7-147105-5 7-147104-5 7-147106-5 62 3.100 [78.74] 3.000 [76.20] 8-147741-1 8-147740-1 8-147739-1 8-147105-1 8-147104-1 8-147106-1 64 3.200 [81.28] 3.100 [78.74] 8-147741-2 8-147740-2 8-147739-2 8-147105-2 8-147104-2 8-147106-2 66 3.300 [83.82] 3.200 [81.28] 8-147741-3 8-147740-3 8-147739-3 8-147105-3 8-147104-3 8-147106-3 70 3.500 [88.90] 3.400 [86.36] 8-147741-5 8-147740-5 8-147739-5 8-147105-5 8-147104-5 8-147106-5 80 4.000 [101.60] 3.900 [99.06] 9-147741-0 9-147740-0 9-147739-0 9-147105-0 9-147104-0 9-147106-0 notes: 1. to obtain the minimum mating post length, add .020 [0.51] (not in cluding the post lead in c hamfer) to the maximum point-of-con tact dimension and .062 [1.57] for recommended board thickness in bottom entry applications.
193 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 two-piece printed circuit board connectors ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 product facts two-piece reliability two- and three-row systems available short signal path for vlsi applications receptacles employ dual cantilever beams and built- in anti-overstress to provide reliable connections built-in guides provide alignment before contact engagement closed entry receptacle housings provide lead-in ramp for positive mating of contacts shrouded headers provide full pin protection polarized headers vertical headers available with action pin posts or .025 [0.64] square solder posts repairable action pin posts simple seating tooling for headers with action pin posts recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 3-row header 5-103264-3 action pin posts solder posts receptacle contact (double beam with anti-overstress) board retention feature available double-row make first/break last header (part nos. available upon request) 3-row closed entry receptacle 5-534974-8 5-102690-3 vertical header with action pin posts 5-534972-2 vertical receptacle 5-532956-3 horizontal receptacle 5-532956-3 horizontal receptacle 6-102589-2 3/4 shroud, right angle header for drawings, technical data or samples, contact your tyco electronics sales engi- neer or call the tyco electronics product information center: 1-800-522-6752 r r
194 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 two-piece printed circuit board connectors (continued) ampmodu interconnection system printed circuit board connectors 5 temperature rating ? headers and receptacles ? ?65c to +125c (black thermoplastic housings, 94v-0 rated) durability (tested to) ? 200 cycles for .000030 [0.00076] gold plating; 75 cycles for .000015 [0.00038] gold plating mating force ? 8 oz. [2.22n] maximum per contact unmating force ? .75 oz. [0.2n] minimum per contact during third mating cycle performance specifications current rating ? 3 amperes max. for single contact; 2 amperes max. per contact for fully energized connector voltage rating ? 250 vac dielectric rating ? 750 vac rms between contacts for one minute termination resistance ? 12 milliohms max. at 100 milliamperes test current, and 50 millivolts open cir- cuit voltage insulation resistance ? 1000 megohms after temperature/humidity cycling ampmodu two-piece printed circuit board connectors are designed to reliably and economically meet the packaging and interconnection requirements of today?s sophisticated electronics. the double row system is produced in 10 thru 200 positions in the vertical headers and horizontal receptacles, and 10 thru 160 positions in the right angle headers and vertical receptacles. the ampmodu three-row connector system is produced in 30 through 300 positions (straight post headers and mating horizontal receptacles). both two- and three-row vertical headers are available with press-fit action pin posts or standard .025 [0.64] square solder posts. there is a simple seating tool for headers with action pin posts. a board retention feature is offered in the two-row horizontal receptacles, two-row right angle headers and two- and three-row vertical headers. built-in guides assure accurate header and receptacle alignment before contact engagement. closed entry receptacle housings provide a lead-in ramp for positive mating of contacts.
195 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 receptacle assemblies, board mount, double-row, closed entry, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000050- .000100 [0.00127-0.00254] matte tin on solder area, with entire contact under- plated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000050-.000100 [0.00127-0.00254] matte tin on solder area, with entire con- tact underplated .000050 [0.00127] nickel related product data mateable headers ? pages 198, 199 performance specifications ? page 194 technical documents ? page 276 product specification 108-25017 application specification 114-9009 additional receptacle assembly sizes and solder tail lengths are available; minimum order quantities may apply. consult tyco electronics. receptacle assembly part nos. r eceptacle assembly part nos. no. of dimensions with .115 [2.92] solder tail lengths with .145 [3.68] solder tail lengths pos. ab standard solder tails board retention tails s tandard solder tails plating a plating b plating a plating b p lating a 12 .858 [21.79] .500 [12.70] 5-532956-1 5-532955-1 5-534204-2 5-534975-5 5-533009-1 14 .958 [24.33] .600 [15.24] ? 7-532955-5 ? ? ? 16 1.058 [26.87] .700 [17.78] 5-532956-2 ? 6-534204-0 6-534975-5 ? 20 1.258 [31.95] .900 [22.86] 5-532956-3 5-532955-3 5-534204-9 5-534975-6 ? 24 1.458 [37.03] 1.100 [27.94] 5-532956-4 5-532955-4 6-534204-1 5-534975-7 ? 30 1.758 [44.65] 1.400 [35.56] 5-532956-5 5-532955-5 5-534204-4 5-534975-8 5-533009-5 36 2.058 [52.27] 1.700 [43.18] 5-532956-6 5-532955-6 5-534204-3 5-534975-9 ? 40 2.258 [57.35] 1.900 [48.26] 5-532956-7 5-532955-7 6-534204-2 6-534975-0 ? 50 2.758 [70.05] 2.400 [60.96] 5-532956-8 5-532955-8 5-534204-1 6-534975-1 5-533009-8 60 3.258 [82.75] 2.900 [73.66] 5-532956-9 5-532955-9 5-534204-5 6-534975-2 5-533009-9 70 3.758 [95.45] 3.400 [86.36] 6-532956-0 6-532955-0 6-534204-3 6-534975-3 6-533009-0 72 3.858 [97.99] 3.500 [88.90] 6-532956-1 6-532955-1 6-534204-4 ? ? 80 4.258 [108.15] 3.900 [99.06] 6-532956-2 6-532955-2 5-534204-8 6-534975-4 6-533009-2 86 4.558 [115.77] 4.200 [106.68] 6-532956-3 6-532955-3 ? ? 6-533009-3 90 4.758 [120.85] 4.400 [111.76] 6-532956-4 6-532955-4 ? ? ? 96 5.058 [128.47] 4.700 [119.38] 6-532956-5 6-532955-5 6-534204-5 ? 6-533009-5 100 5.258 [133.55] 4.900 [124.46] 6-532956-6 6-532955-6 5-534204-6 5-534975-1 6-533009-6 110 5.758 [146.25] 5.400 [137.16] 6-532956-7 6-532955-7 6-534204-6 ? ? 120 6.258 [158.95] 5.900 [149.86] 6-532956-8 6-532955-8 5-534204-7 5-534975-2 6-533009-8 130 6.758 [171.65] 6.400 [162.56] 7-532956-0 7-532955-0 6-534204-7 ? ? 200 10.258 [260.55] 9.900 [251.46] 7-532956-3 7-532955-3 7-534204-0 5-534975-4 ? notes: 1. .115 [2.92] tail length is for use with .062 [1.57] pc boards; .145 [3.68] tail length is for use with .093 [2.36] pc boards. notes: 2. receptacle assemblies with low force contacts are available, consult tyco electronics. 3. .256 [6.50] minimum positive pin stop to prevent shorting between rows. .320 [8.13] .144 [3.66] dia. (2 plc.) .179 [4.55] ty p. .100 [2.54] .125 [3.17] (localized gold plate area) .256 [6.50] (see note 3.) .115 [2.92] (see note 2) .238 [6.05] c l c l .310.010 [7.880.25] .065.005 [1.650.13] to .100.005 [2.540.13] .310.002 [7.870.05] .035.003 [0.890.08] typ. dia. (finished hole) .100.003 [2.540.08] .069 [1.75] .115 or .145 [2.92 or 3.68] (see note 1) .115 or .145 [2.92 or 3.68] (see note 2) a b standard solder tails recommended pc board hole layout (for .055 [1.40] min. thick pc board) board retention tails tolerances not to accumulate within one connector pattern. material ? natural color nylon keying plug min. .174 [4.42] (point of contact) max. part no. 86286-1 (plugs into receptacle contact) horizontal mount (with guide pin slots and standoffs)
196 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 receptacle assemblies, board mount, double-row, closed entry, .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 vertical mount (with guide pin slots and standoffs) material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, duplex plated .000030 [0.00076] gold on contact area, .000050-.000100 [0.00127-0.00254] matte tin on solder area, with entire contact underplated .000050 [0.00127] nickel related product data mateable headers ? pages 198, 199 performance specifications ? page 194 technical documents ? page 276 product specification 108-25017 application specification 114-9009 additional receptacle assembly sizes and solder tail lengths are available; minimum order quantities may apply. consult tyco electronics. .115 [2.92] .129 [3.28] ty p. .320 [8.13] .410 [10.41] .238 [6.05] .100 [2.54] ty p. .179 [4.55] ty p. .125 [3.18] (localized gold plate area) .100 [2.54] .100 [2.54] .144 [3.68] dia. .069 [1.75] ty p. a b .008 [0.20] .100.003 [2.540.08] .100.003 [2.540.08] .035.003 [0.890.08] typ. dia. recommended pc board hole layout (for .055 [1.40] min. thick pc board) tolerances not to accumulate within one connector pattern. keying plug no. of dimensions receptacle assembly pos. ab part nos. 30 1.758 [44.65] 1.400 [35.56] 5-534972-1 40 2.258 [57.35] 1.900 [48.26] 5-534972-2 50 2.758 [70.05] 2.400 [60.96] 5-534972-3 60 3.258 [82.75] 2.900 [73.66] 5-534972-4 70 3.758 [95.45] 3.400 [86.36] 5-534972-5 80 4.258 [108.15] 3.900 [99.06] 5-534972-6 90 4.758 [120.85] 4.400 [111.76] 5-534972-7 100 5.258 [133.55] 4.900 [124.46] 5-534972-8 120 6.258 [158.95] 5.900 [149.86] 6-534972-0 material ? natural color nylon part no. 86286-1 (plugs into receptacle contact)
197 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 receptacle assemblies, board mount, triple-row, closed entry, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 horizontal mount (with guide pin slots and standoffs) material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, plated .000030 [0.00076] gold in mating area, .000050-.000100 [0.00127-0.00254] matte tin on solder area, with entire contact underplated .000050 [0.00127] nickel related product data mateable headers ? page 201 performance specifications ? page 194 technical documents ? page 276 product specification 108-25017 application specification 114-9009 additional receptacle assembly sizes and solder tail lengths are available; minimum order quantities may apply. consult tyco electronics. .410 [10.41] .145 [3.68] .145 [3.68] .125 [3.18] (localized gold plate area) .115 [2.92] .115 [2.92] .400 [10.16] .400 [10.16] .100 [2.54] .100 [2.54] .069 [1.75] .338 [8.59] .144 [3.66] dia. ty p. .100 [2.54] ty p. .179 [4.55] ty p. .300 [7.62] .300 [7.62] b a .035.003 [0.890.08] typ. dia. recommended pc board hole layout (for .055 [1.40] min. thick pc board) tail length tolerances not to accumulate within one connector pattern. keying plug no. of dimensions receptacle assembly part nos. pos. a b plating a 72 2.658 [67.51] 2.300 [58.42] 5-534974-3 93 3.358 [85.29] 3.000 [76.20] 1 5-534974-4 96 3.458 [87.83] 3.100 [78.74] 1- 5-534974-5 150 5.258 [133.55] 4.900 [124.46] 1- 5-534974-8 210 7.258 [184.35] 6.900 [175.26] 6-534974-1 .065.005 [1.650.13] material ? natural color nylon part no. 86286-1 (plugs into receptacle contact) .100.003 [2.540.08]
198 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 headers, straight post, double-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 solder posts and action pin posts (with pin protection and guide pins) material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated posts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel plating c ? selectively plated .000030 [0.00076] gold on contact area and .000015 [0.00038] gold on termination end, with gold flash over .000050 [0.00127] nickel on entire post related product data mateable receptacles ? pages 195, 196 performance specifications ? page 194 action pin posts ?pages 150, 151 application tooling ?pages 152 technical documents ? page 276 product specification 108-25017 application specification 114-9009 additional header sizes are available; minimum order quantities may apply. consult tyco electronics. .085 [2.16] .065 [1.66] r (2 plc.) .130 [3.30] (2 plc.) .040 [1.02] (4 sides) .100 [2.54] pos. ref. board retention tails (where indicated) .515 [13.08] .040.003 [1.020.08] (finished hole) .0453.001 [1.020.03] (drilled hole) .200 [5.08] .110 [2.79] .440 [11.18] .130 [3.30] .320 [8.13] .180 [4.57] .090 [2.29] .200 [5.08] (localized gold plate area) a b recommended pc board hole layout (for .055 [1.40] min. thick pc board) tolerances not to accumulate within one connector pattern. header part nos. with .180 [4.57] tail length no. of dimensions standard solder tails board retention tails pos. ab plating a plating b plating a plating b 12 .980 [24.89] .500 [12.70] 5-102692-1 5-102567-1 6-534978-6 5-534257-5 14 1.080 [27.43] .600 [15.24] ? 7-102567-3 ? ? 16 1.180 [29.97] .700 [17.78] 6-102692-5 ? 5-534978-2 6-534257-4 20 1.380 [35.05] .900 [22.86] 6-102692-6 6-102567-1 5-534978-3 5-534257-6 24 1.580 [40.13] 1.100 [27.94] 5-102692-2 5-102567-2 5-534978-4 5-534257-7 30 1.880 [47.75] 1.400 [35.56] 6-102692-7 6-102567-3 5-534978-5 5-534257-8 36 2.180 [55.37] 1.700 [43.18] 5-102692-3 5-102567-3 5-534978-6 5-534257-9 40 2.380 [60.45] 1.900 [48.26] 6-102692-3 6-102567-2 5-534978-7 6-534257-0 50 2.880 [73.15] 2.400 [60.96] 5-102692-4 5-102567-6 5-534978-8 6-534257-5 60 3.380 [85.85] 2.900 [73.66] 5-102692-5 5-102567-4 5-534978-9 6-534257-1 70 3.880 [98.55] 3.400 [86.36] 6-102692-4 6-102567-0 6-534978-5 6-534257-2 72 3.980 [101.09] 3.500 [88.90] 6-102692-8 6-102567-6 6-534978-0 ? 80 4.380 [111.25] 3.900 [99.06] 5-102692-6 5-102567-8 6-534978-1 5-534257-1 86 4.680 [118.87] 4.200 [106.68] 6-102692-9 6-102567-7 ? ? 90 4.880 [123.95] 4.400 [111.76] 6-102692-2 6-102567-4 ? ? 96 5.180 [131.57] 4.700 [119.38] 5-102692-7 5-102567-5 6-534978-7 ? 100 5.380 [136.65] 4.900 [124.46] 5-102692-8 5-102567-9 6-534978-8 5-534257-2 110 5.880 [149.35] 5.400 [137.16] 6-102692-0 6-102567-5 6-534978-2 ? 120 6.380 [162.05] 5.900 [149.86] 5-102692-9 5-102567-7 6-534978-3 5-534257-3 130 6.880 [174.75] 6.400 [162.56] 7-102692-0 6-102567-9 6-534978-9 ? 200 10.380 [263.65] 9.900 [251.46] 6-102692-1 7-102567-1 5-534978-1 6-534257-9 note: headers with make first/break last posts can be made available, consult tyco electronics. .025 [0.64] square board retention tails .180 [4.57] .100.003 [2.540.08] 1 2 3 .100.003 [2.540.08]
199 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 headers, straight post, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 see chart below .025 [0.64] square action pin tails header part nos. with action pin posts no. of dimensions .250 [6.35] tail length .480 [12.19] tail length .680 [17.27] tail length pos. ab plating a plating b plating a plating c plating c 12 .980 [24.89] .500 [12.70] 5-102690-1 5-103291-4 ? ? ? 14 1.080 [27.43] .600 [15.24] ? 5-103291-3 ? ? ? 20 1.380 [35.05] .900 [22.86] 6-102690-3 5-103291-6 ? ? ? 24 1.580 [40.13] 1.100 [27.94] 5-102690-2 5-103291-7 ? ? ? 36 2.180 [55.37] 1.700 [43.18] 5-102690-3 5-103291-9 ? ? ? 40 2.380 [60.45] 1.900 [48.26] 6-102690-6 5-103291-2 ? ? ? 50 2.880 [73.15] 2.400 [60.96] 5-102690-4 6-103291-0 ? ? ? 60 3.380 [85.85] 2.900 [73.66] 5-102690-5 6-103291-1 ? ? ? 70 3.880 [98.55] 3.400 [86.36] 6-102690-7 6-103291-2 ? ? ? 80 4.380 [111.25] 3.900 [99.06] 5-102690-6 6-103291-4 ? ? ? 90 4.880 [123.95] 4.400 [111.76] 6-102690-1 6-103291-6 ? ? ? 96 5.180 [131.57] 4.700 [119.38] 5-102690-7 6-103291-8 ? ? ? 100 5.380 [136.65] 4.900 [124.46] 5-102690-8 6-103291-9 ? ? 102777-3 120 6.380 [162.05] 5.900 [149.86] 5-102690-9 7-103291-1 5-102691-9 1-102666-1 102777-1 130 6.880 [174.75] 6.400 [162.56] ? ? ? 102666-9 ? notes: 1. other header sizes can be made available upon request. headers with action pin posts are for use with .093 [2.36] nominal or thicker pc boards. 2. application tooling for installing headers with action pin posts is shown on pages 152 and 153. 3. headers with .250 [6.35] tail length can be made available with make first/break last contacts, consult tyco electronics. 4. plated through holes to be prepared per recommendations found on page 151.
200 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 headers, right-angle post, double-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 card extender (with pin protection and guide pins) material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated posts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel related product data mateable receptacles ? pages 195, 196 performance specifications ? page 194 technical documents ? page 276 product specification 108-25017 application specification 114-9009 additional header sizes are available; minimum order quantities may apply. consult tyco electronics. .065 [1.65] r (2 plc.) .040 [1.02] ty p. .200 [5.08] ty p. .185 [4.70] ty p. .100 [2.54] pos. ref. board retention tails (where indicated) .599 [15.21] .762 [19.35] max. .035.003 [0.890.08] dia. typ. (standard finished hole) .157 [3.99] .157 [3.99] .320 [8.13] .320 [8.13] .100 [2.54] .125 [3.18] .125 [3.18] .100 [2.54] (localized gold plate area) .040.003 [1.020.08] (finished hole w/bd. ret.) a b recommended pc board hole layout (for .055 [1.40] min. thick pc board) tolerances not to accumulate within one connector pattern. .025 [0.64] square board retention tails .100.003 [2.540.08] header part nos. with .125 [3.18] tail length no. of dimensions standard solder tails board retention tails pos. ab plating a plating b plating a 12 .980 [24.89] .500 [12.70] 6-102802-2 5-102589-8 5-534245-5 16 1.180 [29.97] .700 [17.78] 6-102802-4 ? 5-534245-4 20 1.380 [35.05] .900 [22.86] 6-102802-5 6-102589-2 5-534245-6 24 1.580 [40.13] 1.100 [27.94] 6-102802-3 5-102589-6 5-534245-7 30 1.880 [47.75] 1.400 [35.56] 6-102802-6 5-102589-4 5-534245-2 36 2.180 [55.37] 1.700 [43.18] 5-102802-3 5-102589-2 5-534245-8 40 2.380 [60.45] 1.900 [48.26] 5-102802-8 6-102589-3 ? 50 2.880 [73.15] 2.400 [60.96] 5-102802-4 5-102589-5 5-534245-1 60 3.380 [85.85] 2.900 [73.66] 5-102802-9 5-102589-7 ? 72 3.980 [101.09] 3.500 [88.90] 6-102802-7 6-102589-7 ? 80 4.380 [111.25] 3.900 [99.06] 5-102802-5 5-102589-1 6-534245-0 90 4.880 [123.95] 4.400 [111.76] 6-102802-0 6-102589-4 ? 100 5.380 [136.65] 4.900 [124.46] 5-102802-6 5-102589-3 6-534245-1 120 6.380 [162.05] 5.900 [149.86] 5-102802-2 6-102589-1 5-534245-3 130 6.880 [174.75] 6.400 [162.56] 6-102802-9 6-102589-9 6-534245-3 note: headers with make first/break last posts can be made available, consult tyco electronics. 2 3 4 .100.003 [2.540.08]
201 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 headers, straight post, triple-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 header part nos. with .180 [4.57] tail length standard board no. of dimensions solder tails retention tails pos. ab plating a plating a 72 2.780 [70.61] 2.300 [58.42] 5-103264-1 5-534258-1 96 3.480 [88.39] 3.000 [76.20] ? 5-534258-3 150 5.380 [136.65] 4.900 [124.46] 5-103264-3 ? 210 7.380 [187.45] 6.900 [175.26] 5-103264-4 ? solder posts (with pin protection and guide pins) material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated posts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel related product data mateable receptacles ? page 197 performance specifications ? page 194 technical documents ? page 276 product specification 108-25017 application specification 114-9009 additional header assembly sizes are available; minimum order quantities may apply. consult tyco electronics. .065 [1.65] r (2 plc.) .040 [1.02] (4 sides) .200 [5.08] .200 [5.08] (localized gold plate area) .100 [2.54] pos. ref. board retention tails (where indicated) .615 [15.62] .210 [5.33] .100 [2.54] .200 [5.08] .440 [11.18] .085 [2.16] .180 [4.57] .100 [2.54] .0453.001 [1.1510.03] (drilled hole) .040.003 [1.660.08] (finished hole) a b recommended pc board hole layout (for .055 [1.40] min. thick pc board) tolerances not to accumulate within one connector pattern. .025 [0.64] square board retention tails 1 2 3 .320 [8.13] .090 [2.29] .180 [4.57] .100.003 [2.540.08]
202 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 headers, vrm (voltage regulator module), .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 no dimensions of ab header part no. pos standard solder tails .250 length action pin tails 30 2.450 [62.23] 1.400 [35.56] 5-146205-1 ? 40 3.095 [78.62] 1.900 [48.26] ? 5-147254-1 3.100 [78.74] 1.900 [48.26] 5-146315-1 ? solder posts and action pin posts (with pin protection, guide ribs, and latching) material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated posts ? copper alloy, duplex plated .000030 [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] nickel related product data mateable receptacles ? pages 195, 196 performance specifications ? page 194 action pin posts ? page 150, 151 application tooling ? pages 152 technical documents ? page 276 product specification 108-25017 application specification 114-9009 .440 [11.18] .515 [13.08] .120 [3.05] .320 [8.13] .290 [7.37] .040 +.003 [1.02 +.08] .125 [3.18] .100 [2.54] .525 [13.33] .100 [2.54] housing outline .110 [2.79] a b b recommended pc board hole layout
203 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 accessories: end shrouds for machine-applied posts ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 technical documents ? page 276 material ? black thermoplastic, flame retardant typical assembly single-row, .100 [2.54] centers part no. 102338-1 material ? black glass-filled polyester double-row, .100 x .100 [2.54 x 2.54] centers part no. 102114-1 .066 [1.68] .290 [7.37] .164 [4.17] .050 [1.27] .712 [18.08] .059 [1.50] max. .350 [8.89] .066 [1.68] .029 [0.74] dia. .405 [10.29] .280 [7.11] .150 [3.81] .050 [1.27] .890 [22.61] .059 [1.50] max. .350 [8.89] .066 [1.68] .029 [0.74] dia. mating polarized housing end shroud board mounted straight posts break line for 7 pos. or larger header pc board break line for 14 pos. or larger header
204 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 accessories: barrier insert, part no. 87743-1 ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 material black polyester technical documents ? page 276 the barrier insert can be used on double row headers (.100 x .100 [2.54 x 2.54] centers), including shrouded versions?3 and 4 sides, as well as unshrouded straight post headers. with one barrier insert several configurations can be obtained, providing headers with capabilities of accept- ing various combinations of polarized and non-polarized ampmodu connectors. for unshrouded headers, the barrier insert is used to establish polarization and to compartmentalize the header. for shrouded headers, the barrier insert is used to compartmentalize the header, while maintaining polarization. the barrier insert itself is notched to facilitate cutting off the ends with a simple tool such as tin snips or scissors to achieve the desired configuration. barrier insert cutoffs fig. 1 partial cutoff (left and right sides) fig. 2 partial cutoff (left side) complete cutoff (right side) fig. 3 complete cutoff (left side) partial cutoff (right side) fig. 4 complete cutoff (left and right sides) typical barrier insert applications for unshrouded double-row, straight post headers, .100 x .100 [2.54 x 2.54] centers for shrouded double-row, 3 and 4 sided headers, .100 x .100 [2.54 x 2.54] centers note: all configurations of barrier inserts compartmentalize headers and maintain polarization, except bar (fig. 4) configuration, which is used primarily for compartmentalizing headers. note: right-angle (figs. 2 and 3) and ?t? (fig. 1) configurations of barrier insert establish polarization; bar (fig. 4) configuration of barrier insert compartmentalizes header. .446 [11.33] .037 [0.94] .314 [7.98] .127 [3.23] .340 [8.64] .030 [0.76] 45 .030 [0.76] .090 [2.29] .100 [2.54] .087 [2.21] .047 [1.19] .094 [2.39] see fig. 3 see fig. 4 see fig. 1 see fig. 2 see fig. 2 see fig. 4 see fig. 1 see fig. 3 .031-.043 [0.79-1.09] dia. x .250 [ [6.35] deep? remainder .029.001 [0.740.03] dia. thru typ. (2)
205 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 accessories: snap-in polarizer for low profile headers ampmodu interconnection system note: all part numbers are rohs compliant. printed circuit board connectors 5 material black thermoplastic, flame retardant part numbers 499991-2 (packaged 50 per bag) 499991-3 (packaged 1000 per bag) related product data low profile headers used with ? pages 135-140 orient the polarizer so that the polarizer latch is on the same side as the inner wall (post side) of the header housing. slide the polarizer over the polarizing slot of the housing until the latch engages the hole. snap off the tab at the break line next to the housing. using the remaining polarizer, repeat the process for the other housing location. the snap-in polarizer provides military polarization for low profile headers. installation of the polarizer is as follows: note: for post shunts, contact tyco electronics. .335 [8.51] .134 [3.40] .335 [8.51] .134 [3.40] break line (see below.) break line (see below.) break line
locking clip contacts and housings 5 206 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 locking clip contacts and housings ampmodu interconnection system .100 x .100 [2.54 x 2.54] contact clearance hole product facts self-retaining contacts provide permanent connection with quick connect and disconnect fast, easy installation with no additional locking hardware required mates with .025 [0.64] square posts in a variety of configurations single- and double-row configurations in up to 20 positions on .100 [2.54] centers modular design permits end-to-end stacking (double- row only) for circuit grouping choice of tin or select gold plating housings made of 94v-0 rated glass-filled polyester recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 .273/.350* [6.93/8.89] (with housing) extraction tool slot .200/.277* [5.08/7.04] (without housing pc board single row both ends closed (page 208) single contact (page 207) both ends closed (for specified no. of circuits? housing size) (page 209) right end open (for stacking to right side) (page 209) left end open (for stacking to left side) (page 209) typical application *if post is longer than maximum specified, post tip may butt against wire ends. dimension defines .025 x .025 [0.64 x 0.64] portion of post. performance characteristics contact current rating ? 3 amperes termination resistance ? 12 milliohms (max.) ? gold plated contacts 16 milliohms (max.) ? tin plated contacts durability ? ref. product specification 108-36028 and 108-36028-1 .025 [0.64] sq. posts r r
locking clip contacts and housings 5 207 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 locking clip contacts ampmodu interconnection system note: all part numbers are rohs compliant. wire crimp contacts with insulation support material and finish contact spring ? stainless steel pating a ? selectively plated .000050 [ 0.00127] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact pating b ? selectively plated .000030 [ 0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact pating c ? .000100-.000200 [0.00254-0.00508] bright tin over .000050 [0.00127] nickel on entire contact wire harnessing if necessary, wires can be grouped with cable ties and secured to a panel with fixed clamps. however, locking clip contacts must be free to float within the connector housings to allow proper extraction. therefore, harnessing hardware or the use of multiple terminations per contact must not restrict the free-floating action of contacts in the housing. for more information request insulation and bundling products catalog 124132. extraction tool no. 91084-1 fixed clamp cable tie unrestricted wires for free-floating contacts ins. heavy duty miniature wire size dia. dimension part nos. applicator for hand range range a finish strip form loose piece amp-o-lectric tool awg [mm 2 ] machine* no. plating b 87190-1 87191-1 30-28 0.05-0.09 .029-.039 [0.74-0.99] .550 [13.97] plating c 5-87190-2 5-87191-2 567310-2 90295-1 plating a 87124-3 87165-3 26-22 0.12-0.4 .038-.062 [0.97-1.57] .584 [14.83] plating b 87124-1 87165-1 466721-2 91533-1 plating c 5-87124-2 5-87165-2 20 0.5-0.6 .038-.062 [0.97-1.57] .584 [14.83] plating b 867052-2 ? 679996-2 90431-1 plating c 5-867052-1 ? *for use with amp-o-lectric model ?k? machines. call the technical support center (1-800-522-6752) for part nos. of applicators for use with the amp-o-lectric model ?g? machines (shown on page 270), as well as other bench machines and fully automatic ampomator lead making machines. notes: 1. these contacts must be crimped in accordance with tyco electronics specification no. 114-25006 in order to function properly in a connector housing. 2. extraction tool no. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts. spring body a related product data housings used with ? pages 208, 209 application tooling ? page 272 technical documents ? pages 277, 278 product specification 108-36028, 108-36028-1 application specification 114-25006
208 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 wire-applied housings for locking clip contacts, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. locking clip contacts and housings 5 single-row material glass-filled polyester, 94v-0 rated related product data contacts ? page 207 mateable headers and posts ? refer to the mating post selection guide ? page 90 technical documents ? pages 277, 278 product specification 108-36028, 108-36028-1 application specification 114-25006 .125 [3.18] centerline single-row, 2 and 3 position housings are available, base part no. 104905. they are designed to be stackable end-to-end and side-by-side. consult tyco electronics. keying plug part no. 87179-1 (plugs directly into housings for .025 [0.64] square post contacts) material ? yellow, nylon a c ty p. b .085 [2.16] .100 [2.54] ty p. .175 [4.44] .700 [17.78] .025 [0.64] sq. post (shown for ref. only) .350 .273 8.89 6.93 .145 [3.68] .060 [1.52] [] (post length) no. of dimensions housing part no. pos. a b c unstamped stamped 1 .108 [2.74] ? .054 [1.37] 87175-2 ? 2 .216 [5.49] .100 [2.54] .058 [1.47] 87175-6 ? 3 .316 [8.03] .200 [5.08] .058 [1.47] 87175-8 ? 4 .416 [10.57] .300 [7.62] .058 [1.47] 1-87175-0 ? 5 .516 [13.11] .400 [10.16] .058 [1.47] 1-87175-2 ? 6 .616 [15.65] .500 [12.70] .058 [1.47] 1-87175-4 1-87175-3 7 .716 [18.19] .600 [15.24] .058 [1.47] 1-87175-6 1-87175-5 8 .816 [20.73] .700 [17.78] .058 [1.47] 1-87175-8 1-87175-7 9 .916 [23.27] .800 [20.32] .058 [1.47] 2-87175-0 1-87175-9 10 1.016 [25.81] .900 [22.86] .058 [1.47] 2-87175-2 2-87175-1 11 1.116 [28.35] 1.000 [25.40] .058 [1.47] 2-87175-4 2-87175-3 12 1.216 [30.89] 1.100 [27.94] .058 [1.47] 2-87175-6 2-87175-5 13 1.316 [33.43] 1.200 [30.48] .058 [1.47] 2-87175-8 2-87175-7 14 1.416 [35.97] 1.300 [33.02] .058 [1.47] 3-87175-0 2-87175-9 15 1.516 [38.51] 1.400 [35.56] .058 [1.47] 87175-4 87175-3 note: housing illustrated above is the ?both ends closed? version.
209 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 wire-applied housings for locking clip contacts, double-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. locking clip contacts and housings 5 double-row material glass-filled polyester, 94v-0 rated related product data contacts ? page 207 mateable headers and posts ? refer to the mating post selection guide ? page 90 technical documents ? pages 277, 278 product specification 108-36028, 108-36028-1 application specification 114-25006 keying plug part no. 87179-1 (plugs directly into housings for .025 [0.64] square post contacts) material ? yellow, nylon a b .350 [8.89] (post length) .100 [2.54] ty p. .700 [17.78] .025 [0.64] sq. post (shown for ref. only) .300 [7.62] both ends closed housing no. of dimensions housing part no. configuration pos. a b unstamped stamped 2 .116 [2.95] ? 87176-2 ? 4 .216 [5.49] .100 [2.54] 87133-1 ? 6 .316 [8.03] .200 [5.08] 87133-7 87133-8 8 .416 [10.57] .300 [7.62] 87133-9 1-87133-0 both ends closed 10 .516 [13.11] .400 [10.16] 87133-2 87133-5 12 .616 [15.65] .500 [12.70] 1-87133-1 1-87133-2 16 .816 [20.73] .700 [17.78] 1-87133-3 1-87133-4 18 .916 [23.27] .800 [20.32] 1-87133-5 1-87133-6 20 1.016 [25.81] .900 [22.86] 87133-3 87133-6 4 .216 [5.49] .100 [2.54] 87132-1 ? right end open 10 .516 [13.11] .400 [10.16] 87132-2 87132-5 20 1.016 [25.81] .900 [22.86] 87132-3 87132-6 4 .216 [5.49] .100 [2.54] 87131-1 ? left end open 10 .516 [13.11] .400 [10.16] 87131-2 87131-5 20 1.016 [25.81] .900 [22.86] 87131-3 87131-6 note: housing illustrated above is the ?both ends closed? version. .270 [6.86] max. .100 [2.54] .058 [1.47] right end open left end open key keyway
210 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv wire-applied contacts and housings ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied contacts and housings 5 product facts terminates 32-20 awg [0.03-0.6mm 2 ] discrete wire contacts have insulation support choice of three contact mating pressures available in a variety of gold and tin platings receptacles mate with .025 [0.64] square or round posts dual cantilever contact beam with built-in anti-overstress feature for reliable matings housings accept a variety of receptacle and pin contacts housing sizes range up to 100 positions housing configurations include single- and double- rows on .100 [2.54] centerlines housing options include detent latching, polarization and bonded strain relief/ pull tabs recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 performance characteristics contact current rating ? 3 amperes termination resistance ? 12 milliohms (max.) ? beryllium copper contacts 20 milliohms (max.) ? copper-tin- phosphor bronze contacts durability ? ref. product specification 108-25020 wire-to-board 1-87631-5 d-r housing, polarized with detent 6-87756-6 std. pressure contacts 3-87977-5 d-r housing, polarized 6-87756-6 std. pressure contacts 1-87499-8 s-r housing, plain 102128-1 high pressure contacts 102387-1 d-r ejection housing, center polarized 6-87756-6 std. pressure contacts 1-87456-5 d-r housing , plain 6-87756-6 std. pressure contacts 1-87756-6 std. pressure plain 6-87456-6 d-r housing, contacts 87483-3 d-r housing with mounting ears 6-87756-6 std. pressure contacts 1825851-1 latch 102241-8 s-r housing polarized with detent 102128-1 high pressure contacts 5-103166-8 hdr 5-102202-7 hdr 5102154-1 hdr 1-87232-0 hdr 5-103166-8 hdr 103168-8 hdr r r
211 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv pin and receptacle contacts ampmodu interconnection system note: all part numbers are rohs compliant. mod iv contacts 5 standard pressure configuration material and finish beryllium copper, phosphor bronze, or copper-tin-phosphor bronze (see charts), plated as follows: plating a ? selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact plating b ? selectively plated .000015 [0.00038] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact plating c ? .000100-.000200 [0.00254-0.00508] tin over .000030 [0.00076] nickel on entire contact related product data housings used with ? pages 214-220 performance characteristics ? page 210 application tooling ? page 270-272 technical documents ? pages 276-278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 additional header sizes are available; minimum order quantities may apply. consult tyco electronics. crimp snap-in (no-strip) receptacles and crimp snap-in pins with insulation support (standard pressure) .068 [1.73] ins. part nos. heavy duty miniature hand dia. applicator no. tool range finish strip form loose piece for amp-o-lectric part no. machine* .040-.055 [1.02-1.40] plating a 87107-5 102348-2 567307-2 90381-1 plating c 87107-6 102348-3 .058 [1.47] .016 [0.41] gap max. .165 [4.19] .470 [11.94] .815 [20.70] no-strip receptacle pin with insulation support crimp snap-in (no-strip) receptacles wire ins. part nos. heavy duty miniature hand size dia. applicator no. tool range (max.) finish strip form loose piece for amp-o-lectric part no. awg [mm 2 ] machine* premium commercial .061 plating a 102095-3 102107-2 26-22 0.12-0.4 [1.55] plating b 102095-2 102107-1 466812-2 91517-1 58641-1 ? plating c 5-102095-4 5-102107-3 *for use with amp-o-lectric model ?k? machines. call the technical support center (1-800-522-6752) for part nos. of applicators for use with the amp-o-lectric model ?g? machines (shown on page 270), as well as other bench machines and fully automatic ampomator lead making machines. ? pro-crimper ii hand tool frame with die set assembly. die set part no. 58641-2 crimp snap-in pins with insulation support
212 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv receptacle contacts ampmodu interconnection system mod iv contacts 5 crimp snap-in receptacles with insulation support (standard, intermediate and high pressure) material and finish beryllium copper, phosphor bronze or copper-tin-phosphor bronze (see charts, on following page), plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on crimp area, with entire contact underplated .000050 [0.00127] nickel plating d ? selectively plated .000050 [0.00127] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact plating e ? selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact plating f ? selectively plated .000015 [0.00038] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact plating g ? .000100-.000200 [0.00254-0.00508] tin over .000030 [0.00076] nickel on entire contact related product data housings used with ? pages 214-220 performance characteristics ? page 210 application tooling ? pages 270-272 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 .058 [1.47] .068 [1.73] .165 [4.19] standard pressure intermediate pressure high pressure a a a a mating force unmating force a-gap dimension standard pressure 9 oz. max. 1.5 oz. min. .008/.014 intermediate pressure 16 oz. max. 2 oz. min. .008/.014 high pressure 20 oz. max. 3 oz. min. .013.002
213 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv receptacle contacts (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mod iv contacts 5 wire ins. part nos. heavy duty miniature applicator for hand size dia. dimension material finish applicator for stripper/ tool range (max.) a amp-o-lectric crimper part nos. awg [mm 2 ] strip form loose piece machine* machine premium commercial cu-sn-ph bz plating a 5-102316-8 6-102316-4 cu-sn-ph bz plating b 5-102316-6 6-102316-3 32-27 0.03-0.1 .040 [1.02] .445 [11.30] be cu plating d 1-102917-1 1-102917-2 466655-2 466921-1 91541-1 ? be cu plating e 102917-1 102917-2 be cu plating f 102917-5 102917-6 cu-sn-ph bz plating g 102316-5 1-102316-2 cu-sn-ph bz plating a 6-87756-7 6-87756-8 cu-sn-ph bz plating b 6-87756-2 6-87756-6 .061 [1.55] .445 [11.30] cu-sn-ph br plating g 87756-6 87756-7 26-22 0.12-0.4 be cu plating d 1-87666-6 87667-5 466571-2 466918-1 91517-1 58641-1 ? be cu plating e 87666-2 87667-2 be cu plating f 87666-5 87667-5 be cu plating g 87666-3 87667-3 cu-sn-ph bz plating a 6-87523-8 6-87523-9 cu-sn-ph bz plating b 2-87523-3 2-87523-4 24-20 0.2-0.6 .069 [1.75] .470 [11.94] be cu plating e 85969-8 86016-2 466562-2 466905-1 91516-1 ? be cu plating f 85969-6 86016-5 cu-sn-ph br plating g 87523-5 87523-6 be cu plating g 85969-9 86016-3 standard pressure (mod iv) wire ins. part nos. heavy duty miniature applicator for hand size dia. dimension material finish applicator for stripper/ tool range (max.) a amp-o-lectric crimper part nos. awg [mm 2 ] strip form loose piece machine* machine premium commercial 32-27 0.03-0.1 .040 [1.02] .445 [11.30] cu-sn-ph bz plating a 5- 102920-1 5- 102920-2 466655-2 466921-1 91541-1 ? be cu plating e 102918-1 102918-2 cu-sn-ph bz plating a 5- 103171-4 5- 103171-5 26-22 0.12-0.4 .061 [1.55] .445 [11.30] cu-sn-ph bz plating b 5- 103171-1 5- 103171-2 466571-2 466918-1 91517-1 58641-1 ? be cu plating e 102548-5 102548-6 be cu plating f 102548-1 102548-3 cu-sn-ph bz plating a 2-87195-3 2-87195-6 .069 [1.75] .470 [11.94] cu-sn-ph bz plating b 2-87195-4 2-87195-5 24-20 0.2-0.6 be cu plating e 86492-6 87046-3 466562-2 466905-1 91516-1 ? be cu plating f 86492-2 87046-1 be cu plating g 86492-9 87046-4 intermediate pressure (mod iv.v) wire ins. part nos. heavy duty miniature applicator for hand size dia . dimension material finish applicator for amp-o-matic tool range (max.) a amp-o-lectric stripper/crimper part nos. awg [mm 2 ] strip form loose piece machine* machine 32-27 0.03-0.1 .040 [1.02] .445 [11.30] ph bz plating e 103455-1 103455-2 466655-2 466921-1 91541-1 26-22 0.12-0.4 .061 [1.55] .445 [11.30] ph bz plating e 87809-1 102128-1 466571-2 466918-1 91517-1 ph bz plating g 87809-2 102128-2 24-20 0.2-0.6 .069 [1.75] .470 [11.94] ph bz plating e 87309-9 1-87309-4 466562-2 466905-1 91516-1 ph bz plating g 87309-8 1-87309-3 * *for use with amp-o-lectric model ?k? machines. call the technical support center (1-800-522-6752) for part nos. of applicators for use with the amp-o-lectric model ?g? machines (shown on page 270), as well as other bench machines and fully automatic ampomator lead making machines. **contact material is phosphor bronze. ? pro-crimper ii hand tool frame with die set assembly. die set part no. 58641-2 high pressure (mod v)**
214 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv wire-applied housings, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 non-polarized material black thermoplastic, flame retardant related product data contacts ? pages 211-213 mateable headers and posts ? pages 93-95, 101-103 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 .600 [15.24] .175 [4.45] .003 [0.08] b .140 [3.56] .100 [2.54] .003 [0.08] c x x a max. .072 [1.83] ty p. no. of dimensions part no. pos. a b c stamped* unstamped** 1 .105 [2.67] ? ? ? 7-87499-2 2 .205 [5.21] .100 [2.54] ? 87499-3 87499-4 3 .305 [7.75] .100 [2.54] .100 [2.54] 87499-5 87499-6 4 .405 [10.29] .200 [5.08] .100 [2.54] 87499-7 87499-8 5 .505 [12.83] .200 [5.08] .200 [5.08] 87499-9 1-87499-0 6 .605 [15.37] .300 [7.62] .200 [5.08] 1-87499-1 1-87499-2 7 .705 [17.91] .300 [7.62] .300 [7.62] 87499-1 87499-2 8 .805 [20.45] .400 [10.16] .300 [7.62] 1-87499-3 1-87499-4 9 .905 [22.99] .400 [10.16] .400 [10.16] 1-87499-5 1-87499-6 10 1.005 [25.53] .500 [12.70] .400 [10.16] 1-87499-7 1-87499-8 11 1.105 [28.01] .500 [12.70] .500 [12.70] 1-87499-9 2-87499-0 12 1.205 [30.61] .600 [15.24] .500 [12.70] 2-87499-1 2-87499-2 13 1.305 [33.15] .600 [15.24] .600 [15.24] 2-87499-3 2-87499-4 14 1.405 [35.69] .700 [17.78] .600 [15.24] 2-87499-5 2-87499-6 15 1.505 [38.23] .700 [17.78] .700 [17.78] 2-87499-7 2-87499-8 16 1.605 [40.77] .800 [20.32] .700 [17.78] 2-87499-9 3-87499-0 17 1.700 [43.18] .800 [20.32] .800 [20.32] ? 3-87499-2 18 1.805 [45.85] .900 [22.86] .800 [20.32] ? 3-87499-4 19 1.900 [48.26] .900 [22.86] .900 [22.86] ? 3-87499-6 20 2.005 [50.93] 1.000 [25.40] .900 [22.86] 3-87499-7 3-87499-8 21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] ? 4-87499-0 22 2.205 [56.01] 1.100 [27.94] 1.000 [25.40] ? 4-87499-2 23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] ? 4-87499-4 24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] ? 4-87499-6 25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] ? 4-87499-8 26 2.605 [66.17] 1.300 [33.02] 1.200 [30.48] ? 5-87499-0 27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] ? 5-87499-2 28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] ? 5-87499-4 29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] ? 5-87499-6 30 3.005 [76.33] 1.500 [38.10] 1.400 [35.56] ? 5-87499-8 31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] ? 6-87499-0 32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] ? 6-87499-2 33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] ? 6-87499-4 34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] ? 6-87499-6 35 3.500 [88.98] 1.700 [43.18] 1.700 [43.18] ? 6-87499-8 36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] ? 7-87499-0 * *cavity identification, part number and date code stamped on housing where size permits. **no marking on housing. notes: 1. strain reliefs are available and may be purchased separately. consult tyco electronics. notes: 2. contact extraction/lance reset tool no. 843996-3. part no. 86286-1 (plugs into standard or intermediate pressure receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) section x-x .050 [1.27] ty p. .070 [1.78] ty p.
215 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv wire-applied housings, single-row, .100 [2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 polarized (with detent latching) a .056 [1.42] .050 [1.27] .071 [1.80] .182 [4.62] .100 [2.54] ty p. .127 [3.23] part no. 86286-1 (plugs into standard or intermediate pressure receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) recessed area .175 [4.45] .003 [0.08] b .003 [0.08] c x x .072 [1.83] .600 [15.24] .100 [2.54] ty p. ty p. no. of dimensions part nos. pos. a b c unstamped* 3 .300 [7.62] .100 [2.54] .100 [2.54] 102241-1 4 .400 [10.16] .200 [5.08] .100 [2.54] 102241-2 5 .500 [12.70] .200 [5.08] .200 [5.08] 102241-3 6 .600 [15.24] .300 [7.62] .200 [5.08] 102241-4 7 .700 [17.78] .300 [7.62] .300 [7.62] 102241-5 8 .800 [20.32] .400 [10.16] .300 [7.62] 102241-6 9 .900 [22.86] .400 [10.16] .400 [10.16] 102241-7 10 1.000 [25.40] .500 [12.70] .400 [10.16] 102241-8 11 1.100 [27.94] .500 [12.70] .500 [12.70] 102241-9 12 1.200 [30.48] .600 [15.24] .500 [12.70] 1-102241-0 13 1.300 [33.02] .600 [15.24] .600 [15.24] 1-102241-1 14 1.400 [35.56] .700 [17.78] .600 [15.24] 1-102241-2 15 1.500 [38.10] .700 [17.78] .700 [17.78] 1-102241-3 16 1.600 [40.64] .800 [20.32] .700 [17.78] 1-102241-4 17 1.700 [43.18] .800 [20.32] .800 [20.32] 1-102241-5 18 1.800 [45.72] .900 [22.86] .800 [20.32] 1-102241-6 19 1.900 [48.26] .900 [22.86] .900 [22.86] 1-102241-7 20 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-102241-8 21 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 1-102241-9 22 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2-102241-0 23 2.300 [58.42] 1.100 [27.94] 1.100 [27.94] 2-102241-1 24 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2-102241-2 25 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-102241-3 26 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2-102241-4 27 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2-102241-5 28 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] 2-102241-6 29 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2-102241-7 30 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-102241-8 31 3.100 [78.74] 1.500 [38.10] 1.500 [38.10] 2-102241-9 32 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 3-102241-0 33 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 3-102241-1 34 3.400 [86.36] 1.700 [43.18] 1.600 [40.64] 3-102242-2 35 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 3-102241-3 36 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] 3-102241-4 *no marking on housing. note: contact extraction/lance reset tool no. 843996-3. material black thermoplastic, flame retardant related product data contacts ? pages 211-213 mateable headers and posts ? pages 115, 116 flexible film connectors, single-row pin assemblies ? catalog 82007 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 section x-x
216 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv wire-applied housings, double-row, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 no. part nos. of dimensions c = .600 [15.24] c = .645 [16.38] pos. a b stamped* unstamped** unstamped** 2 .100 [2.54] ? ? 5-87456-3 ? 4 .200 [5.08] .100 [2.54] 5-87456-0 4-87456-9 2-86177-5 6 .300 [7.62] .200 [5.08] 87456-2 87456-1 1-86177-8 8 .400 [10.16] .300 [7.62] 87456-4 87456-3 2-86177-0 10 .500 [12.70] .400 [10.16] 87456-6 87456-5 1-86177-2 12 .600 [15.24] .500 [12.70] 87456-8 87456-7 1-86177-3 14 .700 [17.78] .600 [15.24] 1-87456-0 87456-9 1-86177-4 16 .800 [20.32] .700 [17.78] 1-87456-2 1-87456-1 1-86177-5 18 .900 [22.86] .800 [20.32] 1-87456-4 1-87456-3 1-86177-6 20 1.000 [25.40] .900 [22.86] 1-87456-6 1-87456-5 86177-1 22 1.100 [27.94] 1.000 [25.40] ? 1-87456-7 86177-2 24 1.200 [30.48] 1.100 [27.94] 2-87456-0 1-87456-9 86177-3 26 1.300 [33.02] 1.200 [30.48] 2-87456-2 2-87456-1 86177-4 28 1.400 [35.56] 1.300 [33.02] 2-87456-4 2-87456-3 86177-5 30 1.500 [38.10] 1.400 [35.56] 2-87456-6 2-87456-5 86177-6 32 1.600 [40.64] 1.500 [38.10] 2-87456-8 2-87456-7 86177-7 34 1.700 [43.18] 1.600 [40.64] 3-87456-0 2-87456-9 86177-8 36 1.800 [45.72] 1.700 [43.18] 3-87456-2 3-87456-1 86177-9 38 1.900 [48.26] 1.800 [45.72] ? 3-87456-3 1-86177-0 40 2.000 [50.80] 1.900 [48.26] 3-87456-6 3-87456-5 1-86177-1 42 2.100 [53.34] 2.000 [50.80] 4-87456-4 4-87456-3 ? 44 2.200 [55.88] 2.100 [53.34] 3-87456-8 3-87456-7 1-86177-7 48 2.400 [60.96] 2.300 [58.42] 6-87456-0 5-87456-9 2-86177-3 50 2.500 [63.50] 2.400 [60.96] 4-87456-0 3-87456-9 2-86177-1 52 2.600 [66.04] 2.500 [63.50] 4-87456-2 4-87456-1 1-86177-9 54 2.700 [68.58] 2.600 [66.04] ? 4-87456-5 ? 56 2.800 [71.12] 2.700 [68.58] ? 6-87456-1 ? 58 2.900 [73.66] 2.800 [71.12] ? 6-87456-3 ? 60 3.000 [76.20] 2.900 [73.66] 5-87456-2 5-87456-1 ? 64 3.200 [81.28] 3.100 [78.74] 6-87456-6 6-87456-5 ? 66 3.300 [83.82] 3.200 [81.28] 5-87456-4 5-87456-7 ? 70 3.500 [88.90] 3.400 [86.36] ? 5-87456-5 2-86177-4 72 3.600 [91.44] 3.500 [88.90] 4-87456-8 4-87456-7 ? * *cavity identification, part number and date code stamped on housing where size permits. **no marking on housing. notes: 1. strain reliefs are available and may be purchased separately. consult tyco electronics. notes: 2. contact extraction/lance reset tool no. 843996-3. b non-polarized .100 [2.54] x .100 [2.54] ty p. .175 [4.45] a .240 [6.10] .070 [1.78] .050 [1.27] ty p. .072 [1.83] part no. 86286-1 (plugs into standard or intermediate pressure receptacle contact) material ? natural color nylon keying plugs part no. 87077-1 (for .645 high housings) part no. 87077-2 (for .600 high housings) (plugs directly into housing) material black thermoplastic, flame retardant related product data contacts ? pages 211-213 mateable headers and posts ? pages 96-99, 104, 105, 117-120 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 section x-x x c r optional
217 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mod iv wire-applied housings, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 no. of dimensions part nos. pos. a b c stamped* unstamped** 6 .300 [7.62] .100 [2.54] .100 [2.54] 87977-1 2-87977-8 8 .400 [10.16] .200 [5.08] .100 [2.54] 87977-2 2-87977-9 10 .500 [12.70] .200 [5.08] .200 [5.08] 87977-3 3-87977-0 12 .600 [15.24] .300 [7.62] .200 [5.08] 87977-4 3-87977-1 14 .700 [17.78] .300 [7.62] .300 [7.62] 87977-5 3-87977-2 16 .800 [20.32] .400 [10.16] .300 [7.62] 87977-6 3-87977-3 18 .900 [22.86] .400 [10.16] .400 [10.16] ? 3-87977-4 20 1.000 [25.40] .500 [12.70] .400 [10.16] 87977-8 3-87977-5 22 1.100 [27.94] .500 [12.70] .500 [12.70] ? 3-87977-6 24 1.200 [30.48] .600 [15.24] .500 [12.70] 1-87977-0 3-87977-7 26 1.300 [33.02] .600 [15.24] .600 [15.24] 1-87977-1 3-87977-8 28 1.400 [35.56] .700 [17.78] .600 [15.24] ? 3-87977-9 30 1.500 [38.10] .700 [17.78] .700 [17.78] ? 4-87977-0 32 1.600 [40.64] .800 [20.32] .700 [17.78] ? 4-87977-1 34 1.700 [43.18] .800 [20.32] .800 [20.32] ? 4-87977-2 36 1.800 [45.72] .900 [22.86] .800 [20.32] ? 4-87977-3 38 1.900 [48.26] .900 [22.86] .900 [22.86] ? 4-87977-4 40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 1-87977-8 4-87977-5 42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] ? 4-87977-6 44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] ? 4-87977-7 48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] ? 5-87977-6 50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2-87977-1 4-87977-8 52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] ? 4-87977-9 54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] ? 5-87977-0 56 2.800 [71.12] 1.400 [35.56] 1.300 [33.02] ? 5-87977-8 58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] ? 6-87977-0 60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2-87977-4 5-87977-1 64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] ? 6-87977-2 66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] ? 5-87977-2 70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] ? 5-87977-3 72 3.600 [91.44] 1.800 [45.72] 1.700 [43.18] ? 5-87977-4 * *cavity identification, part number and date code stamped on housing where size permits. **no marking on housing or strain relief. notes: 1. strain reliefs are available and may be purchased separately. consult tyco electronics. notes: 2. contact extraction/lance reset tool no. 843996-3. a polarized .175 [4.45] .600 [15.24] .240 [6.10] material black thermoplastic, flame retardant related product data contacts ? pages 211-213 mateable headers and posts ? pages 117-131 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 part no. 86286-1 (plugs into standard or intermediate pressure receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) strain relief locators (on housings 20 positions and larger) .100 [2.54] .070 [1.78] .100 [2.54] ty p. .003 [0.08] b .003 [0.08] c x x .100 [2.54] ty p. ty p. section x-x r optional .050 [1.27] ty p.
218 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 mod iv wire-applied housings, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) polarized (with detent latching, with and without strain relief/pull tab) .100 [2.54] x .100 [2.54] ty p. .175 [4.45] a .240 [6.10] .070 [1.78] ty p. .050 [1.27] ty p. part no. 86286-1 (plugs into standard or intermediate pressure receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) material black thermoplastic, flame retardant related product data contacts ? pages 211-213 mateable headers and posts ? pages 117-125, 127-133 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 section x-x x .600 [15.24] r optional .100 [2.54] ty p. .003 [0.08] b .003 [0.08] c .095 [2.41] dia. .500 [12.70] 1.150 [29.21] .095 [2.41] dia. 1.000 [25.40] 1.900 [48.26] strain relief locators (on housings 20 positions and larger) housing with strain relief/pull tab strain relief part no. 87921-1 (10 thru 18 positions) housing with strain relief/pull tab strain relief part no. 87710-1 (20 positions and larger) part nos. no. of dimensions no. of without strain relief with strain relief pos. abc detents stamped* unstamped** stamped* 6 .300 [7.62] .100 [2.54] .100 [2.54] 1 87631-2 87631-1 ? 8 .400 [10.16] .200 [5.08] .100 [2.54] 1 87631-4 87631-3 ? 10 .500 [12.70] .200 [5.08] .200 [5.08] 1 87631-6 87631-5 87922-1 12 .600 [15.24] .300 [7.62] .200 [5.08] 1 87631-8 87631-7 87922-2 14 .700 [17.78] .300 [7.62] .300 [7.62] 1 1-87631-0 87631-9 87922-3 16 .800 [20.32] .400 [10.16] .300 [7.62] 1 1-87631-2 1-87631-1 87922-4 * *cavity identification, part number and date code stamped on housing and/or strain relief where size permits. **no marking on housing or strain relief. notes: 1. the strain relief/pull tab can be bonded to any thermoplastic connector housing. notes: 2. strain reliefs may be purchased separately. notes: 3. contact extraction/lance reset tool no. 843996-3.
219 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 mod iv wire-applied housings, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) part nos. no. of dimensions no. of without strain relief with strain relief pos. abc detents stamped* unstamped** stamped* 18 .900 [22.86] .400 [10.16] .400 [10.16] 1 1-87631-4 1-87631-3 87922-5 20 1.000 [25.40] .500 [12.70] .400 [10.16] 2 1-87631-6 1-87631-5 87733-1 22 1.100 [27.94] .500 [12.70] .500 [12.70] 2 1-87631-8 1-87631-7 ? 24 1.200 [30.48] .600 [15.24] .500 [12.70] 2 2-87631-0 1-87631-9 87733-3 26 1.300 [33.02] .600 [15.24] .600 [15.24] 2 2-87631-2 2-87631-1 87733-4 28 1.400 [35.56] .700 [17.78] .600 [15.24] 2 2-87631-4 2-87631-3 ? 30 1.500 [38.10] .700 [17.78] .700 [17.78] 2 2-87631-6 2-87631-5 87733-6 32 1.600 [40.64] .800 [20.32] .700 [17.78] 2 2-87631-8 2-87631-7 87733-7 34 1.700 [43.18] .800 [20.32] .800 [20.32] 2 3-87631-0 2-87631-9 87733-8 36 1.800 [45.72] .900 [22.86] .800 [20.32] 2 3-87631-2 3-87631-1 ? 38 1.900 [48.26] .900 [22.86] .900 [22.86] 2 ? 3-87631-3 ? 40 2.000 [50.80] 1.000 [25.40] .900 [22.86] 2 3-87631-6 3-87631-5 1-87733-1 42 2.100 [53.34] 1.000 [25.40] 1.000 [25.40] 2 3-87631-8 3-87631-7 ? 44 2.200 [55.88] 1.100 [27.94] 1.000 [25.40] 2 4-87631-0 3-87631-9 ? 48 2.400 [60.96] 1.200 [30.48] 1.100 [27.94] 2 ? 5-87631-9 ? 50 2.500 [63.50] 1.200 [30.48] 1.200 [30.48] 2 4-87631-2 4-87631-1 1-87733-4 52 2.600 [66.04] 1.300 [33.02] 1.200 [30.48] 2 ? 4-87631-3 ? 54 2.700 [68.58] 1.300 [33.02] 1.300 [33.02] 2 4-87631-6 4-87631-5 ? 58 2.900 [73.66] 1.400 [35.56] 1.400 [35.56] 2 ? 6-87631-3 ? 60 3.000 [76.20] 1.500 [38.10] 1.400 [35.56] 2 5-87631-2 5-87631-1 1-87733-7 64 3.200 [81.28] 1.600 [40.64] 1.500 [38.10] 2 6-87631-6 6-87631-5 ? 66 3.300 [83.82] 1.600 [40.64] 1.600 [40.64] 2 ? 5-87631-3 ? 70 3.500 [88.90] 1.700 [43.18] 1.700 [43.18] 2 ? 5-87631-5 ? 72 3.800 [96.52] 1.800 [45.72] 1.700 [43.18] 2 5-87631-8 5-87631-7 ? * *cavity identification, part number and date code stamped on housing and/or strain relief where size permits. **no marking on housing or strain relief. notes: 1. the strain relief/pull tab can be bonded to any thermoplastic connector housing. notes: 2. strain reliefs may be purchased separately. notes: 3. contact extraction/lance reset tool no. 843996-3.
220 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system note: all part numbers are rohs compliant. mod iv wire-applied housings 5 mod iv wire-applied housings, double-row, .100 x .100 [2.54 x 2.54] centerline (continued) center polarized material black thermoplastic, flame retardant related product data contacts ? pages 211-213 mateable headers and posts ? amp-latch low profile headers, shrouded ? pages 135-140 technical documents ? pages 277, 278 product specification 108-25007, 108-25019, 108-25020, 108-25021 application specification 114-25003, 114-25016 part no. 86286-1 (plugs into standard or intermediate pressure receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) position no. 1 indicator r optional section x-x .030 [0.76] .130 [3.30] .285 [7.24] .072 [1.83] .600 [15.24] .120 [3.05] .100 [2.54] .227 [5.77] .130 [3.30] b a c x x no. of dimensions part nos. pos. a b c (stamped*) 8 .580 [14.73] .225 [5.72] .300 [7.62] 1-102387-4 10 .680 [17.27] .275 [6.98] .400 [10.16] 102387-1 14 .880 [22.35] .375 [9.53] .600 [15.24] 102387-2 16 .980 [24.89] .425 [10.80] .700 [17.78] 102387-3 20 1.180 [29.97] .525 [13.34] .900 [22.86] 102387-4 22 1.280 [32.51] .575 [14.61] 1.000 [25.40] 1-102387-5 24 1.380 [35.05] .625 [15.88] 1.100 [27.94] 102387-5 26 1.480 [37.59] .675 [17.15] 1.200 [30.48] 102387-6 30 1.680 [42.67] .775 [19.69] 1.400 [35.56] 102387-7 34 1.880 [47.75] .875 [22.23] 1.600 [40.64] 102387-8 40 2.180 [55.37] 1.025 [26.04] 1.900 [48.26] 102387-9 44 2.380 [60.45] 1.125 [28.58] 2.100 [53.34] 1-102387-3 50 2.680 [68.07] 1.275 [32.39] 2.400 [60.96] 1-102387-0 60 3.180 [80.77] 1.525 [38.74] 2.900 [73.66] 1-102387-1 64 3.380 [85.85] 1.625 [41.28] 3.100 [78.74] 1-102387-2 *cavity identification and tyco electronics stamped on housing. ?non-functional slot is used for gating purposes during injection molding process. this gating feature is not inherent in all production molds. therefore, the depicted slot will only be present on housings produced on mold tooling requiring this gating feature. note: contact extraction/lance reset tool no. 843996-3. .570 [14.88] .150? [3.81]
221 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 short point, crimp snap-in wire-applied contacts and housings ampmodu interconnection system note: all part numbers are rohs compliant. short point, crimp snap-in wire- applied contacts and housings 5 wire-to-board 103688-9 mte recept. housing 1-104479-1 short point contact 104257-5 mte recept. housing 1-104480-5 short point contact 104482-9 short point recept. housing 5-104481-6 short point contact 104257-3 mte recept. housing 1-104480-4 short point contact 5-104450-3 mte hdr 1-87232-0 hdr product facts short point of contact mates with .169 [4.29] to .259 [6.58] long post double-row housings are end-to-end and side-to-side stackable terminates 32-20 awg [0.03-0.6 mm 2 ] discrete wire contacts have insulation support to accept a maximum insulation diameter of .060 [1.52] available with .000015 [0.00038] or .000030 [0.00076] gold duplex, or tin plating mates with .025 [0.64] square posts dual cantilever contact beams for reliable matings locking retention latch provides approximately 3 lb [13.34 n] of retention force unique locking latch design helps prevent latch from protruding through latch window contacts snap into ampmodu mte single-row housings double-row housing configurations include .100 [2.54] centerline, plain and polarized housing sizes range from 4 to 52 positions recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 produced under a quality management system certified to iso 9001 a copy of the certificate is available upon request ampmodu short point receptacle contacts are designed to mate with .025 [0.64] square posts. they will mate with posts as short as .169 [4.29]. short point double-row housings are end-to-end and side-to-side stackable on .100 [2.54] centers. contacts also can be used in single-row ampmodu mte housings to provide a complete wire-crimp system, or to serve as replacement contacts. performance characteristics contact current rating ? 3 amperes termination resistance ? 12 milliohms (max.) durability ? ref. product specification 108-1472 r r iso certified 9001
222 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 short point crimp snap-in receptacle contacts ampmodu interconnection system note: all part numbers are rohs compliant. short point contacts 5 .068 [1.73] cc .060 [1.52] .460 [11.68] section c - c .012 [0.30] gap quick-change wire size applicator for applicator for range ins. finish contact part no. amp-o-matic hand awg [mm 2 ] dia. (standard pressure) amp-o-lectric stripper/crimper tool range strip form loose piece machine* machine nos. plating a 1-104481-1 1-104481-3 32-28 0.03-0.08 .025-.060 [0.64-1.52] plating b 1-104481-0 1-104481-2 567296-2 466980-1 91518-1 plating c 5-104481-2 5-104481-6 . plating a 1-104480-3 1-104480-6 26-22 0.13-0.3 .025-.060 [0.64-1.52] plating b 1-104480-2 1-104480-5 567297-2 466981-1 91518-1 plating c 1-104480-7 1-104480-4 . plating a 1-104479-0 1-104479-3 24-20 0.2-0.5 .025-.060 [0.64-1.52] plating b 104479-9 1-104479-2 567298-2 466982-1 91551-1 plating c 104479-8 1-104479-1 *for use with model ?k? machines. call the tooling/technical assistance center (1-800-722- 1111) fo r p a r t n o s. o f applicators for use with the model ?g? machines (shown on page 288), as well as other bench machines and fully automatic ampomator lead making machines. keying plug part no. 104072-1 ten plugs are supplied per strip. order quantity reflects the number of strips required. extraction/lance reset tool no. 843477-1 material and finish copper alloy c7025, plated as follows: plating a ? duplex plated .000030 [0.00076] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel plating b ? duplex plated .000015 [0.00038] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel plating c ? .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on entire contact related product data performance characteristics ? page 221 housings used in ? short point?pages 223, 224 ampmodu mte unloaded housings ? pages 228-233 application tooling ? page 270-272 technical documents ? pages 276-278 product specification 108-1472 application specification 114-25038
223 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 short point wire-applied housings, double-row, non-polarized, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. short point wire-applied housings 5 no. of dimensions housing pos. ab part no. 4 .198 [5.03] .100 [2.54] 104482-1 6 .298 [7.57] .200 [5.08] 104482-2 8 .398 [10.11] .300 [7.62] 104482-3 10 .498 [12.65] .400 [10.16] 104482-4 12 .598 [15.19] .500 [12.70] 104482-5 14 .698 [17.73] .600 [15.24] 104482-6 16 .798 [20.27] .700 [17.78] 104482-7 18 .898 [22.81] .800 [20.32] 104482-8 20 .998 [25.35] .900 [22.86] 104482-9 22 1.098 [27.89] 1.000 [25.40] 1-104482-0 26 1.298 [32.97] 1.200 [30.48] 1-104482-1 28 1.398 [35.51] 1.300 [33.02] 1-104482-2 30 1.498 [38.05] 1.400 [35.56] 1-104482-3 32 1.598 [40.59] 1.500 [38.10] 1-104482-4 34 1.698 [43.13] 1.600 [40.64] 1-104482-5 36 1.798 [45.67] 1.700 [43.18] 1-104482-6 38 1.898 [48.21] 1.800 [45.72] 1-104482-7 40 1.998 [50.75] 1.900 [48.26] 1-104482-8 44 2.198 [55.83] 2.100 [53.34] 1-104482-9 52 2.598 [65.99] 2.500 [63.50] 2-104482-0 material black thermoplastic, flame retardant, 94v-0 rated related product data performance characteristics ? page 221 contacts ? page 222 mateable headers ? pages 104, 105 technical documents ? pages 276-278 product specification 108-1472 application specification 114-25038 b x x section x-x a .049 [1.24] .100 ty p. [2.54] .198 [5.03] .036 [0.91] 0.72 [1.83] .600 [15.24] .100 [2.54] .049 2 plc. [1.24]
224 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 short point wire-applied housings, double-row, polarized, .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. short point wire-applied housings 5 material black thermoplastic, flame retardant, 94v-0 rated related product data performance characteristics ? page 221 contacts ? page 222 mateable headers ? pages 104, 105, 135-138 technical documents ? pages 276-278 product specification 108-1472 application specification 114-25038 b a x x .049 [1.24] .100 ty p. [2.54] .198 [5.03] .100 [2.54] .100 [2.54] .095 [2.41] .100 [2.54] section x-x .036 [0.91] 0.72 [1.83] .600 [15.24] no.of dimensions housing pos. ab part no. 8 .398 [10.11] .300 [7.62] 104483-1 10 .498 [12.65] .400 [10.16] 1-104483-1 12 .598 [15.19] .500 [12.70] 1-104483-2 14 .698 [17.73] .600 [15.24] 104483-9 18 .898 [22.81] .800 [20.32] 104483-2 20 .998 [25.35] .900 [22.86] 104483-3 26 1.298 [32.97] 1.200 [30.48] 104483-4 30 1.498 [38.05] 1.400 [35.56] 104483-5 38 1.898 [48.21] 1.800 [45.72] 104483-6 50 2.498 [63.45] 2.400 [60.96] 1-104483-3 52 2.598 [65.99] 2.500 [63.50] 1-104483-0 54 2.698 [68.53] 2.600 [66.04] 104483-7 64 3.198 [81.23] 3.100 [78.74] 104483-8 note: other sizes can be made available on request. .049 2 plc. [1.24]
225 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte interconnection system ampmodu interconnection system mte interconnection system 5 performance specifications electrical characteristics contact current rating ? 3 amperes for single contact in free air (amperage could vary due to ambient temperature, wire size and duty cycles.) contact termination resistance ? 15 milliohms (max.) dielectric withstanding voltage ? at sea level?600 vac, rms at 70,000 ft. [21 336 m]?225 vac, rms insulation resistance ? 5,000 megohms (min.) environmental characteristics operating temperature ? -65c to +105c vibration ? 15 g?s (gold), 10 g?s (tin) physical shock ? 50 g?s industrial mixed flow gasing ? class 1 (20 days) (gold) product specification 108-25034 application specification 114-25026 product facts receptacle assemblies mate with .025 [0.64] sq. posts; mating post length is .200 [5.08] min., .250 [6.35] max. proven ampmodu receptacle contact design; dual cantilever beams, built-in anti-overstress, completely enclosed ?box? design, standard or high-pressure insulation displacement technology two contact sizes for terminating 30-22 awg [0.05- 0.3 mm 2 ] wire range; .054 [1.37] max. insulation diam - eter with an insulation wall thickness of .015 [0.38] max. choice of gold duplex or tin plated contacts interchangeable crimp snap-in pin and receptacle contacts available housing sizes 2 through 25 positions, single-row .100 [2.54] centers plain housings are end-to-end and/or back-to-back stackable for open pin field applications optional header with ?swaged tail? feature helps prevent movement prior to flow soldering integral latch provides positive retention between header and receptacle housing coupling shrouds permit ganging of smaller connectors with guide ribs to form larger single- or double-row latching connectors mass terminating tooling provides lowest applied cost for most production needs smt and smt compatible, high-temp headers available recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 the ampmodu mte interconnection system offers both wire-to-board and wire-to-wire connectors using .025 [0.64] sq. post technology. the ampmodu mte interconnection system consists of single-row housings with contacts preloaded on .100 [2.54] centers. housings are furnished with contacts partially inserted, leaving the termination areas exposed. final contact insertion can be accomplished automatically with tyco electronics application equipment, and manually when terminated with the tyco electronics pistol grip hand tool. the heart of the system is the insulation displacement contact design, featured in both pin and receptacle contacts. the receptacle contact, available in either standard or high-pressure, features dual cantilever beams in an enclosed ?box.? the post stop helps prevent a mating post from disturbing the wire termination and also limits the mating depth of a long post to protect a wrap-type termination at the base of the post. the forward contact stop helps prevent contact overinsertion prior to termination. all contacts are furnished on carrier strips which are interlocked for stability and positive location during termination. single-row housings are available in sizes 2 through 25 positions. included are three styles of receptacle housings?plain, polarized/ latching and ribbed and two styles of pin housings, shrouded with polarizing/ latching feature and ribbed. r r
226 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte interconnection system (continued) ampmodu interconnection system mte interconnection system 5 receptacle assemblies with guide ribs (see pages 232 & 233) receptacle assemblies polarized/latching (see pages 230 & 231) double-row coupling shroud (see page 241) ampmodu shrouded headers, double-row, straight or right angle post 1 (see pages 119-121, 124, 125, 127, 128, 131-133 & 149) receptacle assemblies with guide ribs (see pages 232 & 233) receptacle contact, insulation displacement (used in all receptacle assemblies) ampmodu breakaway headers, single- or double-row, straight or right?angle post, with or without board retention feature (see pages 102-105) receptacle assemblies plain (see pages 228 and 229) high pressure receptacle assemblies, plain (see page 234) receptacle assemblies, polarized/latching (see pages 230 & 231) high-temp headers, polarized/latching, straight and right angle post, with or without holddown (see pages 249 & 250) 2 headers, polarized/latching, straight post, with or without swaged tail (see pages 244 & 245) 2 headers, polarized/latching, right angle post, with or without holddown (see pages 246 & 247) 1 mating ampmodu double-row shrouded header assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from ce nterline of last 1 post to inside of end shroud wall. 2 surface mount right-angle and vertical headers are also available (see pages 251 and 252) wire-to-board single-row coupling shroud (see page 240)
227 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte interconnection system (continued) ampmodu interconnection system mte interconnection system 5 receptacle contact, insulation displacement (used in all receptacle assemblies) crimp snap-in receptacle contact (used with unloaded housings? see page 253) crimp snap-in pin contact (used with unloaded housings? see page 254) pin contact, insulation displacement (used in all pin assemblies) pin assemblies, shrouded polarized/latching (see pages 236 & 237) receptacle assemblies, polarized/latching (see pages 230 & 231) receptacle assemblies with guide ribs (see pages 232 & 233) single-row coupling shroud (see page 240) panel mount pin shroud (see page 242) pin assemblies with guide ribs (see pages 238 & 239) note: for wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable. wire-to-wire
228 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte receptacle assemblies?plain, single-row, .100 [2.54] centerline ampmodu interconnection system mte receptacle assemblies 5 preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recom- mended when using the tyco electronics manual pistol grip tool. material and finish housing ? black thermoplastic, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact note: insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. related product data mateable ampmodu products breakaway headers ? pages 102- 110 (with .230 mating length) reeled breakaway headers ? pages 106, 107 (with .230 mating length) machine applied bandolier posts ? page 163 single-row shrouded headers with .066 [1.68] end dimension ? pages 115, 116 interchangeable crimp contacts (short point) ? page 253 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 receptacle contacts (see note 1) position no. 1 indicator (farside) 1.120 [28.45] .600 [15.24] .098 [2.49] .100 [2.54] ty p. b ty p. a .520 [13.21] these receptacle assemblies with plain housings can be stacked end-to-end and/or side- to-side for single or double-row connections to an open pin field with a .100 [2.54] centerline grid.
229 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte receptacle assemblies?strip form plain, single-row, .100 [2.54] centerline (continued) mte receptacle assemblies?individual form plain, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte receptacle assemblies 5 housing strip form receptacle assembly strip form receptacle assembly no. of dimensions quantities 30-26 awg [0.05-0.15mm 2] wire 26-22 awg [0.12-0.3mm 2] wire unloaded pos. ab per strip plating a plating b plating c plating a plating b plating c housings segment 2 2.000 [50.80] .198 [5.03] 10 5-103979-1 5-103978-1 5-103977-1 5-103976-1 5-103975-1 5-103974-1 103688-1 3 2.400 [60.96] .298 [7.57] 8 5-103979-2 5-103978-2 5-103977-2 5-103976-2 5-103975-2 5-103974-2 103688-2 4 1.990 [50.55] .398 [10.11] 5 5-103979-3 5-103978-3 5-103977-3 5-103976-3 5-103975-3 5-103974-3 103688-3 5 1.990 [50.55] .498 [12.65] 4 5-103979-4 5-103978-4 5-103977-4 5-103976-4 5-103975-4 5-103974-4 103688-4 6 2.390 [60.71] .598 [15.19] 4 5-103979-5 5-103978-5 5-103977-5 5-103976-5 5-103975-5 5-103974-5 103688-5 7 1.400 [35.56] .698 [17.73] 2 5-103979-6 5-103978-6 5-103977-6 5-103976-6 5-103975-6 5-103974-6 103688-6 8 1.600 [40.64] .798 [20.27] 2 5-103979-7 5-103978-7 5-103977-7 5-103976-7 5-103975-7 5-103974-7 103688-7 9 1.800 [45.72] .898 [22.81] 2 5-103979-8 5-103978-8 5-103977-8 5-103976-8 5-103975-8 5-103974-8 103688-8 10 2.000 [50.80] .998 [23.35] 2 5-103979-9 5-103978-9 5-103977-9 5-103976-9 5-103975-9 5-103974-9 103688-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103979-0 6-103978-0 6-103977-0 6-103976-0 6-103975-0 6-103974-0 1-103688-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103979-1 6-103978-1 6-103977-1 6-103976-1 6-103975-1 6-103974-1 1-103688-1 no. of dimensions individual receptacle assembly individual receptacle assembly unloaded pos. b 30-26 awg [0.05-0.15mm 2 ] wire 26-22 awg [0.12-0.3mm 2 ] wire housings plating a plating b plating c plating a plating b plating c 13 1.298 [32.96] 6-103903-2 6-103684-2 6-103685-2 6-103902-2 6-103686-2 6-103687-2 1-103688-2 14 1.398 [35.51] 6-103903-3 6-103684-3 6-103685-3 6-103902-3 6-103686-3 6-103687-3 1-103688-3 15 1.498 [38.05] 6-103903-4 6-103684-4 6-103685-4 6-103902-4 6-103686-4 6-103687-4 1-103688-4 16 1.598 [40.59] 6-103903-5 6-103684-5 6-103685-5 6-103902-5 6-103686-5 6-103687-5 1-103688-5 17 1.698 [43.13] 6-103903-6 6-103684-6 6-103685-6 6-103902-6 6-103686-6 6-103687-6 1-103688-6 18 1.798 [45.67] 6-103903-7 6-103684-7 6-103685-7 6-103902-7 6-103686-7 6-103687-7 1-103688-7 19 1.898 [48.20] 6-103903-8 6-103684-8 6-103685-8 6-103902-8 6-103686-8 6-103687-8 1-103688-8 20 1.998 [50.75] 6-103903-9 6-103684-9 6-103685-9 6-103902-9 6-103686-9 6-103687-9 1-103688-9 21 2.098 [53.29] 7-103903-0 7-103684-0 7-103685-0 7-103902-0 7-103686-0 7-103687-0 2-103688-0 22 2.198 [55.83] 7-103903-1 7-103684-1 7-103685-1 7-103902-1 7-103686-1 7-103687-1 2-103688-1 23 2.298 [58.37] 7-103903-2 7-103684-2 7-103685-2 7-103902-2 7-103686-2 7-103687-2 2-103688-2 24 2.398 [60.91] 7-103903-3 7-103684-3 7-103685-3 7-103902-3 7-103686-3 7-103687-3 2-103688-3 25 2.498 [63.45] 7-103903-4 7-103684-4 7-103685-4 7-103902-4 7-103686-4 7-103687-4 2-103688-4 notes: 1. receptacle assemblies are furnished with strip contacts partially inserted into housing?contacts latched into ?preload? wind ows. contacts are fully inserted into housings automatically when terminated with tyco electronics application machines, or manually when terminated with tyco electronics pistol grip hand tool. 2. use extraction/lance reset tool no. 843477-1 to remove receptacle contacts. 3. keying plugs are available, see page 253.
230 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte receptacle assemblies?polarized/latching, single-row, .100 [2.54] centerline ampmodu interconnection system mte receptacle assemblies 5 material and finish housing ? black thermoplastic, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact note: insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. related product data mateable ampmodu products pin assemblies (polarized/ latching) ? pages 236, 237 pin assemblies with guide ribs (installed in panel mount pin shroud) ? pages 238, 239, 242 headers (polarized/latching) ? pages 244-252 interchangeable crimp contacts (short point) ? page 253 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 receptacle contacts (see note 1) position no. 1 indicator (farside) 1.120 [28.45] .600 [15.24] .098 [2.49] .100 [2.54] ty p. b ty p. a .520 [13.21] preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recommended when using the tyco electronics manual pistol grip tool.
231 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte receptacle assemblies?strip form polarized/latching, single-row, .100 [2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mte receptacle assemblies 5 housing strip form receptacle assembly strip form receptacle assembly no. of dimensions quantities 30-26 awg [0.05-0.15mm 2] wire 26-22 awg [0.12-0.3mm 2] wire unloaded pos. ab per strip plating a plating b plating c plating a plating b plating c housings segment 2 2.000 [50.80] .198 [5.03] 10 5-103961-1 5-103960-1 5-103959-1 5-103958-1 5-103957-1 5-103956-1 104257-1 3 2.400 [60.96] .298 [7.57] 8 5-103961-2 5-103960-2 5-103959-2 5-103958-2 5-103957-2 5-103956-2 104257-2 4 1.990 [50.55] .398 [10.11] 5 5-103961-3 5-103960-3 5-103959-3 5-103958-3 5-103957-3 5-103956-3 104257-3 5 1.990 [50.55] .498 [12.65] 4 5-103961-4 5-103960-4 5-103959-4 5-103958-4 5-103957-4 5-103956-4 104257-4 6 2.390 [60.71] .598 [15.19] 4 5-103961-5 5-103960-5 5-103959-5 5-103958-5 5-103957-5 5-103956-5 104257-5 7 1.400 [35.56] .698 [17.73] 2 5-103961-6 5-103960-6 5-103959-6 5-103958-6 5-103957-6 5-103956-6 104257-6 8 1.600 [40.64] .798 [20.27] 2 5-103961-7 5-103960-7 5-103959-7 5-103958-7 5-103957-7 5-103956-7 104257-7 9 1.800 [45.72] .898 [22.81] 2 5-103961-8 5-103960-8 5-103959-8 5-103958-8 5-103957-8 5-103956-8 104257-8 10 2.000 [50.80] .998 [23.35] 2 5-103961-9 5-103960-9 5-103959-9 5-103958-9 5-103957-9 5-103956-9 104257-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103961-0 6-103960-0 6-103959-0 6-103958-0 6-103957-0 6-103956-0 1-104257-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103961-1 6-103960-1 6-103959-1 6-103958-1 6-103957-1 6-103956-1 1-104257-1 mte receptacle assemblies?individual form polarized/latching, single-row, .100 [2.54] centerline no. of dimensions individual receptacle assembly individual receptacle assembly unloaded pos. b 30-26 awg [0.05-0.15mm 2 ] wire 26-22 awg [0.12-0.3mm 2 ] wire housings plating a plating b plating c plating a plating b plating c 13 1.298 [32.96] 6-103897-2 6-103640-2 6-103641-2 6-103734-2 6-103644-2 6-103645-2 1-104257-2 14 1.398 [35.51] 6-103897-3 6-103640-3 6-103641-3 6-103734-3 6-103644-3 6-103645-3 1-104257-3 15 1.498 [38.05] 6-103897-4 6-103640-4 6-103641-4 6-103734-4 6-103644-4 6-103645-4 1-104257-4 16 1.598 [40.59] 6-103897-5 6-103640-5 6-103641-5 6-103734-5 6-103644-5 6-103645-5 1-104257-5 17 1.698 [43.13] 6-103897-6 6-103640-6 6-103641-6 6-103734-6 6-103644-6 6-103645-6 1-104257-6 18 1.798 [45.67] 6-103897-7 6-103640-7 6-103641-7 6-103734-7 6-103644-7 6-103645-7 1-104257-7 19 1.898 [48.20] 6-103897-8 6-103640-8 6-103641-8 6-103734-8 6-103644-8 6-103645-8 1-104257-8 20 1.998 [50.75] 6-103897-9 6-103640-9 6-103641-9 6-103734-9 6-103644-9 6-103645-9 1-104257-9 21 2.098 [53.29] 7-103897-0 7-103640-0 7-103641-0 7-103734-0 7-103644-0 7-103645-0 2-104257-0 22 2.198 [55.83] 7-103897-1 7-103640-1 7-103641-1 7-103734-1 7-103644-1 7-103645-1 2-104257-1 23 2.298 [58.37] 7-103897-2 7-103640-2 7-103641-2 7-103734-2 7-103644-2 7-103645-2 2-104257-2 24 2.398 [60.91] 7-103897-3 7-103640-3 7-103641-3 7-103734-3 7-103644-3 7-103645-3 2-104257-3 25 2.498 [63.45] 7-103897-4 7-103640-4 7-103641-4 7-103734-4 7-103644-4 7-103645-4 2-104257-4 notes: 1. receptacle assemblies are furnished with strip contacts partially inserted into housing?contacts latched into ?preload? wind ows. contacts are fully inserted into housings automatically when terminated with tyco electronics application machines, or manually when terminated with tyco electron ics pistol grip hand tool. 2. use extraction/lance reset tool no. 843477-1 to remove receptacle contacts. 3. keying plugs are available, see page 253.
232 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte receptacle assemblies?guide ribs, single-row, .100 [2.54] centerline ampmodu interconnection system mte receptacle assemblies 5 preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recommended when using the tyco electronics manual pistol grip tool. material and finish housing ? black thermoplastic, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact note: insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. related product data coupling shrouds used with ? single-row ? page 240 double-row ? page 241 mateable ampmodu products (with receptacle assemblies installed in single-row coupling shrouds) ? pin assemblies (polarized/ latching) ? pages 236, 237 pin assemblies with guide ribs (installed in panel mount pin shroud) ? pages 238, 239, 242 headers (polarized/latching) ? pages 244-252 mateable ampmodu products (with receptacle assemblies installed in double-row coupling shrouds) ? headers, shrouded, double-row (.318 [8.08] mating post length, .150 [3.81] end dimension) ? pages 119-121, 124, 125, 128, 129, 131-133 receptacle contacts (see note 1) position no. 1 indicator (farside) 1.120 [28.45] .600 [15.24] .098 [2.49] .100 [2.54] ty p b ty p. a .520 [13.21] interchangeable crimp contacts ? (short point) ? page 253 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
233 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte receptacle assemblies?strip form with guide ribs, single-row, .100 [2.54] centerline (continued) mte receptacle assemblies?individual form with guide ribs, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte receptacle assemblies 5 housing strip form receptacle assembly strip form receptacle assembly no. of dimensions quantities 30-26 awg [0.05-0.15mm 2] wire 26-22 awg [0.12-0.3mm 2] wire unloaded pos. ab per strip plating a plating b plating c plating a plating b plating c housings segment 2 2.000 [50.80] .198 [5.03] 10 5-103973-1 5-103972-1 5-103971-1 5-103970-1 5-103969-1 5-103968-1 103648-1 3 2.400 [60.96] .298 [7.57] 8 5-103973-2 5-103972-2 5-103971-2 5-103970-2 5-103969-2 5-103968-2 103648-2 4 1.990 [50.55] .398 [10.11] 5 5-103973-3 5-103972-3 5-103971-3 5-103970-3 5-103969-3 5-103968-3 103648-3 5 1.990 [50.55] .498 [12.65] 4 5-103973-4 5-103972-4 5-103971-4 5-103970-4 5-103969-4 5-103968-4 103648-4 6 2.390 [60.71] .598 [15.19] 4 5-103973-5 5-103972-5 5-103971-5 5-103970-5 5-103969-5 5-103968-5 103648-5 7 1.400 [35.56] .698 [17.73] 2 5-103973-6 5-103972-6 5-103971-6 5-103970-6 5-103969-6 5-103968-6 103648-6 8 1.600 [40.64] .798 [20.27] 2 5-103973-7 5-103972-7 5-103971-7 5-103970-7 5-103969-7 5-103968-7 103648-7 9 1.800 [45.72] .898 [22.81] 2 5-103973-8 5-103972-8 5-103971-8 5-103970-8 5-103969-8 5-103968-8 103648-8 10 2.000 [50.80] .998 [23.35] 2 5-103973-9 5-103972-9 5-103971-9 5-103970-9 5-103969-9 5-103968-9 103648-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103973-0 6-103972-0 6-103971-0 6-103970-0 6-103969-0 6-103968-0 1-103648-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103973-1 6-103972-1 6-103971-1 6-103970-1 6-103969-1 6-103968-1 1-103648-1 no. of dimensions individual receptacle assembly individual receptacle assembly unloaded pos. b 30-26 awg [0.05-0.15mm 2 ] wire 26-22 awg [0.12-0.3mm 2 ] wire housings plating a plating b plating c plating a plating b plating c 13 1.298 [32.96] 6-103901-2 6-103649-2 6-103650-2 6-103900-2 6-103651-2 6-103652-2 1-103648-2 14 1.398 [35.51] 6-103901-3 6-103649-3 6-103650-3 6-103900-3 6-103651-3 6-103652-3 1-103648-3 15 1.498 [38.05] 6-103901-4 6-103649-4 6-103650-4 6-103900-4 6-103651-4 6-103652-4 1-103648-4 16 1.598 [40.59] 6-103901-5 6-103649-5 6-103650-5 6-103900-5 6-103651-5 6-103652-5 1-103648-5 17 1.698 [43.13] 6-103901-6 6-103649-6 6-103650-6 6-103900-6 6-103651-6 6-103652-6 1-103648-6 18 1.798 [45.67] 6-103901-7 6-103649-7 6-103650-7 6-103900-7 6-103651-7 6-103652-7 1-103648-7 19 1.898 [48.20] 6-103901-8 6-103649-8 6-103650-8 6-103900-8 6-103651-8 6-103652-8 1-103648-8 20 1.998 [50.75] 6-103901-9 6-103649-9 6-103650-9 6-103900-9 6-103651-9 6-103652-9 1-103648-9 21 2.098 [53.29] 7-103901-0 7-103649-0 7-103650-0 7-103900-0 7-103651-0 7-103652-0 2-103648-0 22 2.198 [55.83] 7-103901-1 7-103649-1 7-103650-1 7-103900-1 7-103651-1 7-103652-1 2-103648-1 23 2.298 [58.37] 7-103901-2 7-103649-2 7-103650-2 7-103900-2 7-103651-2 7-103652-2 2-103648-2 24 2.398 [60.91] 7-103901-3 7-103649-3 7-103650-3 7-103900-3 7-103651-3 7-103652-3 2-103648-3 25 2.498 [63.45] 7-103901-4 7-103649-4 7-103650-4 7-103900-4 7-103651-4 7-103652-4 2-103648-4 notes: 1. receptacle assemblies are furnished with strip contacts partially inserted into housing?contacts latched into ?preload? wind ows. contacts are fully inserted into housings automatically when terminated with tyco electronics application machines, or manually when terminated wit h tyco electronics pistol grip hand tool. 2. use extraction/lance reset tool no. 843477-1 to remove receptacle contacts. 3. keying plugs are available, see page 253.
234 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte high pressure receptacle assemblies?plain, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte receptacle assemblies 5 receptacle contacts (see note 1) position no. 1 indicator (farside) 1.120 [28.45] .600 [15.24] .098 [2.49] .100 [2.54] ty p. b ty p. a .520 [13.21] strip form strip form no. of dimensions housings receptacle receptacle pos. quantities per assembly assembly ab strip segment 30-26 awg 26-22 awg [.05-.15mm 2 ] wire [.12-.30mm 2 ] wire 2 1.980 [50.29] .198 [5.03] 10 5-104438-1 5-104439-1 3 1.490 [37.85] .298 [7.57] 5 5-104438-2 5-104439-2 4 1.990 [50.55] .398 [10.11] 5 5-104438-3 5-104439-3 5 1.990 [50.55] .498 [12.65] 4 5-104438-4 5-104439-4 6 2.390 [60.71] .598 [15.19] 4 5-104438-5 5-104439-5 7 1.400 [35.56] .698 [17.73] 2 5-104438-6 5-104439-6 8 1.600 [40.64] .798 [20.27] 2 5-104438-7 5-104439-7 9 1.800 [45.72] .898 [22.81] 2 5-104438-8 5-104439-8 10 2.000 [50.80] .998 [23.35] 2 5-104438-9 5-104439-9 11 2.200 [55.88] 1.098 [27.89] 2 6-104438-0 6-104439-0 12 2.400 [60.96] 1.198 [30.43] 2 6-104438-1 6-104439-1 notes: 1. receptacle assemblies are furnished with strip contacts partially inserted into housing?contacts latched into ?preload? windows. contacts are fully inserted into housings automatically when terminated with tyco elec tronics app lication machines, or manually when terminated with tyco elec tronics pistol grip hand tool. 2. high pressure receptacle contacts can be made available in other housing styles and position sizes. contact your tyco electronics sales representative. preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recom- mended when using the tyco electronics manual pistol grip tool. material and finish housing ? black thermoplastic, 94v-0 rated contacts ? phosphor bronze, duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel note: insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insulation wall thickness of .015 [0.38] max. mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. related product data mateable ampmodu products breakaway headers ? pages 102- 110, (with .230 mating length) reeled breakaway headers ? pages 106, 107 (with .230 mating length) machine applied bandolier posts ? page 163 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278) product specification 108-25034 application specification 114-25026
235 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte high pressure receptacle assemblies ? guide ribs ampmodu interconnection system note: all part numbers are rohs compliant. mte pin assemblies 5 preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recom- mended when using the tyco electronics manual pistol grip tool. material and finish housing ? thermoplastic, black, 94v-0 rated contacts ? phosphor bronze, duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin on crimp area, with entire contact underplated .000050 [0.00127] nickel. related product data coupling shrouds used with ? single-row ? page 240 double-row ? page 241 mateable ampmodu products (with receptacle assemblies installed in single-row coupling shrouds) ? pin assemblies (polarized/ latching) ? pages 236, 237 pin assemblies with guide ribs (installed in panel mount pin shroud) ? pages 238, 239, 242 headers (polarized/latching) ? pages 244-252 mateable ampmodu products (with receptacle assemblies installed in double-row coupling shrouds) ? headers, shrouded, double-row (.318 [8.08] mating post length, .150 [3.81] end dimension) ? pages 119-121, 124, 125, 128, 129, 131-133 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 receptacle contacts (see note 1) position no. 1 indicator (farside) 1.120 [28.45] .600 [15.24] .098 [2.49] .100 [2.54] ty p b ty p. a .520 [13.21] strip form strip form no. of dimensions housings receptacle receptacle pos. quantities per assembly assembly ab strip segment 30-26 awg 26-22 awg [.05-.15mm 2 ] wire [.12-.30mm 2 ] wire 2 1.980 [50.29] .198 [5.03] 10 5-147396-1 5-147030-3 3 1.490 [37.85] .298 [7.57] 5 5-147396-2 5-147030-4 4 1.990 [50.55] .398 [10.11] 5 5-147396-3 5-147030-1 5 1.990 [50.55] .498 [12.65] 4 5-147396-4 5-147030-2 6 2.390 [60.71] .598 [15.19] 4 5-147396-5 5-147030-5 7 1.400 [35.56] .698 [17.73] 2 5-147396-6 5-147030-6 8 1.600 [40.64] .798 [20.27] 2 5-147396-7 5-147030-7 9 1.800 [45.72] .898 [22.81] 2 5-147396-8 5-147030-8 10 2.000 [50.80] .998 [23.35] 2 5-147396-9 5-147030-9 11 2.200 [55.88] 1.098 [27.89] 2 6-147396-0 6-147030-0 12 2.400 [60.96] 1.198 [30.43] 2 6-147396-1 6-147030-1
236 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte pin assemblies, shrouded?polarized/latching, single-row, .100 [2.54] centerline ampmodu interconnection system mte pin assemblies 5 preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recom- mended when using the tyco electronics manual pistol grip tool. material and finish housing ? black thermoplastic, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact note: insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. related product data mateable ampmodu products ? receptacle assemblies (polarized/latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 interchangeable crimp contacts ? page 254 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 .200 [5.08] .100 [2.54] ty p. position no. 1 indicator 1.470 [37.34] .950 [24.13] b ty p. a .520 [13.21] .260 [6.60] pin contacts (see note 1)
237 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte pin assemblies, shrouded?strip form polarized/latching, single-row, .100 [2.54] centerline (continued) mte pin assemblies, shrouded?individual form polarized/latching, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte pin assemblies 5 housing strip form pin assembly strip form pin assembly no. of dimensions quantities 30-26 awg [0.05-0.15mm 2] wire 26-22 awg [0.12-0.3mm 2] wire unloaded pos. ab per strip plating a plating b plating c plating a plating b plating c housings segment 2 2.360 [59.94] .295 [7.49] 8 5-103949-1 5-103948-1 5-103947-1 5-103946-1 5-103945-1 5-103944-1 103653-1 3 1.980 [50.29] .395 [10.03] 5 5-103949-2 5-103948-2 5-103947-2 5-103946-2 5-103945-2 5-103944-2 103653-2 4 1.980 [50.29] .495 [12.57] 4 5-103949-3 5-103948-3 5-103947-3 5-103946-3 5-103945-3 5-103944-3 103653-3 5 2.380 [60.45] .595 [15.11] 4 5-103949-4 5-103948-4 5-103947-4 5-103946-4 5-103945-4 5-103944-4 103653-4 6 1.390 [35.31] .695 [17.65] 2 5-103949-5 5-103948-5 5-103947-5 5-103946-5 5-103945-5 5-103944-5 103653-5 7 2.390 [60.71] .795 [20.19] 3 5-103949-6 5-103948-6 5-103947-6 5-103946-6 5-103945-6 5-103944-6 103653-6 8 1.790 [45.47] .895 [22.73] 2 5-103949-7 5-103948-7 5-103947-7 5-103946-7 5-103945-7 5-103944-7 103653-7 9 1.990 [50.57] .995 [25.27] 2 5-103949-8 5-103948-8 5-103947-8 5-103946-8 5-103945-8 5-103944-8 103653-8 10 2.190 [55.63] 1.095 [27.81] 2 5-103949-9 5-103948-9 5-103947-9 5-103946-9 5-103945-9 5-103944-9 103653-9 11 2.390 [60.71] 1.195 [30.35] 2 6-103949-0 6-103948-0 6-103947-0 6-103946-0 6-103945-0 6-103944-0 1-103653-0 12 2.590 [65.79] 1.295 [32.89] 2 6-103949-1 6-103948-1 6-103947-1 6-103946-1 6-103945-1 6-103944-1 1-103653-1 no. of dimensions individual pin assembly individual pin assembly unloaded pos. b 30-26 awg [0.05-0.15mm 2 ] wire 26-22 awg [0.12-0.3mm 2 ] wire housings plating a plating b plating c plating a plating b plating c 13 1.395 [35.43] 6-103894-2 6-103658-2 6-103659-2 6-103893-2 6-103660-2 6-103661-2 1-103653-2 14 1.495 [37.97] 6-103894-3 6-103658-3 6-103659-3 6-103893-3 6-103660-3 6-103661-3 1-103653-3 15 1.595 [40.51] 6-103894-4 6-103658-4 6-103659-4 6-103893-4 6-103660-4 6-103661-4 1-103653-4 16 1.695 [43.05] 6-103894-5 6-103658-5 6-103659-5 6-103893-5 6-103660-5 6-103661-5 1-103653-5 17 1.795 [45.59] 6-103894-6 6-103658-6 6-103659-6 6-103893-6 6-103660-6 6-103661-6 1-103653-6 18 1.895 [48.13] 6-103894-7 6-103658-7 6-103659-7 6-103893-7 6-103660-7 6-103661-7 1-103653-7 19 1.995 [50.67] 6-103894-8 6-103658-8 6-103659-8 6-103893-8 6-103660-8 6-103661-8 1-103653-8 20 2.095 [53.21] 6-103894-9 6-103658-9 6-103659-9 6-103893-9 6-103660-9 6-103661-9 1-103653-9 21 2.195 [55.75] 7-103894-0 7-103658-0 7-103659-0 7-103893-0 7-103660-0 7-103661-0 2-103653-0 22 2.295 [58.29] 7-103894-1 7-103658-1 7-103659-1 7-103893-1 7-103660-1 7-103661-1 2-103653-1 23 2.395 [60.83] 7-103894-2 7-103658-2 7-103659-2 7-103893-2 7-103660-2 7-103661-2 2-103653-2 24 2.495 [63.37] 7-103894-3 7-103658-3 7-103659-3 7-103893-3 7-103660-3 7-103661-3 2-103653-3 25 2.595 [65.91] 7-103894-4 7-103658-4 7-103659-4 7-103893-4 7-103660-4 7-103661-4 2-103653-4 notes: 1. pin assemblies are furnished with strip contacts partially inserted into housing?contacts latched into ?preload? windows. co ntacts are fully inserted into housings automatically when terminated with tyco elec tronics app lication machines, or manually when terminated with tyco elec tronics pistol grip hand tool. 2. use extraction/lance reset tool no. 843477-1 to remove pin contacts.
238 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte pin assemblies?guide ribs, single-row, .100 [2.54] centerline ampmodu interconnection system mte pin assemblies 5 preassembled housings in strip form are available in positions 2 thru 12. for ease of handling, positions 2 thru 5 are recom- mended when using the tyco electronics manual pistol grip tool. material and finish housing ? black thermoplastic, 94v-0 rated contacts ? phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact note: insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. related product data mateable ampmodu mte products (with pin assembly installed in panel mount pin shroud) ? pages 242, 243 receptacle assemblies (polarized/latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single row coupling shroud) ? pages 232, 233, 235, 240 interchangeable crimp contacts ? page 254 application tooling ? page 273 performance specifications ? page 225 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 .098 [2.49] .100 [2.54] ty p. pin contacts (see note 1) position no. 1 indicator (farside) 1.120 [28.45] .600 [15.24] b ty p. a .520 [13.21]
239 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte pin assemblies?strip form with guide ribs, single-row, .100 [2.54] centerline (continued) mte pin assemblies?individual form with guide ribs, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte pin assemblies 5 no. of dimensions individual pin assembly individual pin assembly unloaded pos. b 30-26 awg [0.05-0.15mm 2 ] wire 26-22 awg [0.12-0.3mm 2 ] wire housings plating a plating b plating c plating a plating b plating c 13 1.398 [35.51] 6-103896-2 6-103657-2 6-103656-2 6-103895-2 6-103655-2 6-103654-2 1-104503-2 14 1.498 [38.05] 6-103896-3 6-103657-3 6-103656-3 6-103895-3 6-103655-3 6-103654-3 1-104503-3 15 1.598 [40.59] 6-103896-4 6-103657-4 6-103656-4 6-103895-4 6-103655-4 6-103654-4 1-104503-4 16 1.698 [43.13] 6-103896-5 6-103657-5 6-103656-5 6-103895-5 6-103655-5 6-103654-5 1-104503-5 17 1.798 [45.67] 6-103896-6 6-103657-6 6-103656-6 6-103895-6 6-103655-6 6-103654-6 1-104503-6 18 1.898 [48.20] 6-103896-7 6-103657-7 6-103656-7 6-103895-7 6-103655-7 6-103654-7 1-104503-7 19 1.998 [50.75] 6-103896-8 6-103657-8 6-103656-8 6-103895-8 6-103655-8 6-103654-8 1-104503-8 20 2.098 [53.29] 6-103896-9 6-103657-9 6-103656-9 6-103895-9 6-103655-9 6-103654-9 1-104503-9 21 2.198 [55.83] 7-103896-0 7-103657-0 7-103656-0 7-103895-0 7-103655-0 7-103654-0 2-104503-0 22 2.298 [58.37] 7-103896-1 7-103657-1 7-103656-1 7-103895-1 7-103655-1 7-103654-1 2-104503-1 23 2.398 [60.91] 7-103896-2 7-103657-2 7-103656-2 7-103895-2 7-103655-2 7-103654-2 2-104503-2 24 2.498 [63.45] 7-103896-3 7-103657-3 7-103656-3 7-103895-3 7-103655-3 7-103654-3 2-104503-3 25 2.598 [65.99] 7-103896-4 7-103657-4 7-103656-4 7-103895-4 7-103655-4 7-103654-4 2-104503-4 notes: 1. pin assemblies are furnished with strip contacts partially inserted into housing?contacts latched into ?preload? windows. co ntacts are fully inserted into housings automatically when terminated with tyco electronics application machines, or manually when terminated with tyco elec tronics pistol grip hand tool. 2. use extraction/lance reset tool no. 843477-1 to remove pin contacts. housing strip form pin assembly strip form pin assembly no. of dimensions quantities 30-26 awg [0.05-0.15mm 2] wire 26-22 awg [0.12-0.3mm 2] wire unloaded pos. ab per strip plating a plating b plating c plating a plating b plating c housings segment 2 1.980 [50.29] 0.198 [5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1 3 1.490 [37.85] 0.298 [7.57] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2 4 1.990 [50.55] 0.398 [10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3 5 1.990 [50.55] 0.498 [12.65] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4 6 2.390 [60.71] 0.598 [15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5 7 1.400 [35.56] 0.698 [17.73] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6 8 1.600 [40.64] 0.798 [20.27] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7 9 1.800 [45.72] 0.898 [22.81] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8 10 2.000 [50.80] 0.998 [25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103955-0 6-103954-0 6-103953-0 6-103952-0 6-103951-0 6-103950-0 1-104503-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103955-1 6-103954-1 6-103953-1 6-103952-1 6-103951-1 6-103950-1 1-104503-1
240 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 coupling shrouds for mte receptacle assemblies with guide ribs ampmodu interconnection system note: all part numbers are rohs compliant. mte coupling shrouds 5 pin assembly, shrouded polarized/latching (refer to pages 236 & 237) receptacle assemblies with guide ribs (refer to pages 232, 233, 235) headers, polarized/latching, straight and right angle post, with or without holddown (see pages 244-252) single-row material black thermoplastic, 94v-0 rated single-row coupling shroud .582 [14.78] a .307 [7.80] pin assemblies with guide ribs, installed in panel mount pin shroud (refer to pages 238, 239 & 242) no. of dimension single-row pos. a coupling shroud 4 .485 [12.32] 103680-1 5 .585 [14.86] 103680-2 6 .685 [17.40] 103680-3 7 .785 [19.94] 103680-4 8 .885 [22.48] 103680-5 9 .985 [25.02] 103680-6 10 1.085 [27.56] 103680-7 11 1.185 [30.10] 103680-8 12 1.285 [32.64] 103680-9 13 1.385 [35.18] 1-103680-0 14 1.485 [37.72] 1-103680-1 no. of dimension single-row pos. a coupling shroud 15 1.585 [40.26] 1-103680-2 16 1.685 [42.80] 1-103680-3 17 1.785 [45.34] 1-103680-4 18 1.885 [47.88] 1-103680-5 19 1.985 [50.42] 1-103680-6 20 2.085 [52.96] 1-103680-7 21 2.185 [55.50] 1-103680-8 22 2.285 [58.04] 1-103680-9 23 2.385 [60.58] 2-103680-0 24 2.485 [63.12] 2-103680-1 25 2.585 [65.66] 2-103680-2 typical application of single-row coupling shroud and mating ampmodu mte products technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
241 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 coupling shrouds for mte receptacle assemblies with guide ribs (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mte coupling shrouds 5 ampmodu shrouded headers double-row, straight or right?angle post 1 receptacle assemblies with guide ribs (refer to pages 232, 233 & 235) 1 mating ampmodu double-row shrouded headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline 1 of last post to inside of end shroud wall. double-row material black thermoplastic, 94v-0 rated double-row coupling shroud .735 [18.67] a position no. 1 identification no. of dimension double-row pos. a coupling shroud 8 .585 [14.86] 103681-1 10 .685 [17.40] 103681-2 12 .785 [19.94] 103681-3 14 .885 [22.48] 103681-4 16 .985 [25.02] 103681-5 18 1.085 [27.56] 104500-1 20 1.185 [30.10] 104500-2 22 1.285 [32.64] 104500-3 24 1.385 [35.18] 104500-4 26 1.485 [37.72] 104500-5 28 1.585 [40.26] 104500-6 30 1.685 [42.80] 104500-7 32 1.785 [45.34] 104500-8 34 1.885 [47.88] 104500-9 40 2.185 [55.50] 1-104500-0 50 2.685 [68.20] 1-104500-1 typical application of double-row coupling shroud and mating ampmodu products technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
242 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 panel mount pin shrouds for mte pin assemblies with guide ribs, single-row ampmodu interconnection system note: all part numbers are rohs compliant. mte panel mount pin shrouds 5 material black thermoplastic, 94v-0 rated .990 [25.15] a position no. 1 identification no. of dimensions panel mount pos. ab pin shroud 2 .735 [18.67] .625 [15.88] 103682-1 3 .835 [21.21] .725 [18.42] 103682-2 4 .935 [23.75] .825 [20.96] 103682-3 5 1.035 [26.29] .925 [23.50] 103682-4 6 1.135 [28.83] 1.025 [26.04] 103682-5 7 1.235 [31.37] 1.125 [28.58] 103682-6 8 1.335 [33.91] 1.225 [31.12] 103682-7 9 1.435 [36.45] 1.325 [33.66] 103682-8 10 1.535 [38.99] 1.425 [36.20] 103682-9 11 1.635 [41.53] 1.525 [38.74] 1-103682-0 12 1.735 [44.07] 1.625 [41.28] 1-103682-1 13 1.835 [46.61] 1.725 [43.82] 1-103682-2 .250 [6.35] .310 [7.87] .320 [8.13] .270 [6.86] .320 [8.13] b no. of dimensions panel mount pos. ab pin shroud 14 1.935 [49.15] 1.825 [46.36] 1-103682-3 15 2.035 [51.69] 1.925 [48.90] 1-103682-4 16 2.135 [54.23] 2.025 [51.44] 1-103682-5 17 2.235 [56.77] 2.125 [53.98] 1-103682-6 18 2.335 [59.31] 2.225 [56.52] 1-103682-7 19 2.435 [61.85] 2.325 [59.06] 1-103682-8 20 2.535 [64.39] 2.425 [61.60] 1-103682-9 21 2.635 [66.93] 2.525 [64.14] 2-103682-0 22 2.735 [69.47] 2.625 [66.68] 2-103682-1 23 2.835 [72.01] 2.725 [69.22] 2-103682-2 24 2.935 [74.55] 2.825 [71.76] 2-103682-3 25 3.035 [77.09] 2.925 [74.30] 2-103682-4 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
243 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 panel mount pin shrouds for mte pin assemblies with guide ribs, single-row (continued) ampmodu interconnection system mte panel mount pin shrouds 5 material black thermoplastic, 94v-0 rated typical application of panel mount pin shroud and mating ampmodu products pin assembly with guide ribs (refer to pages 238 & 239) receptacle assemblies with guide ribs, installed in single-row coupling shroud (refer to pages 232, 233, 235 & 240) receptacle assembly, polarized/latching (refer to pages 230 & 231) panel mount pin shroud rear of panel technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
244 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, shrouded polarized/latching, single-row .100 [2.54] centerline ampmodu interconnection system mte headers 5 .025 [0.64] square straight post (with or without swaged tail) material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire post related product data mateable ampmodu mte products ? receptacle assemblies (polarized/latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 .060 [1.52] .535 [13.59] position no. 1 indicator .120 [3.05] .200 [5.08] .130 [3.30] .060 [1.52] .100 [2.54] .100 [2.54] ty p. .200 [5.08] ref. (contact area) .230 [5.84] .350 [8.89] *.003 [0.08]; tolerances not to accumulate within one connector pattern. note: swaged retention tails are provided in a minimum of two locations per header. recommended pc board hole layout .035.003 dia. typ. [0.890.08] or .040.003 dia. typ. [1.020.08] (for retention tails) a b c x x .275 [6.98] .100* [2.54] ty p. c swaged retention tail (see note) section x-x
245 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, shrouded polarized/latching, single-row .100 [2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mte headers 5 no. of dimensions polarized/latching header with swage polarized/latching header without swage pos. a b c plating a plating b plating c plating a plating b plating c 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-103908-1 5-104362-1 5-103669-1 5-103735-1 5-104363-1 5-103639-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-103908-2 5-104362-2 5-103669-2 5-103735-2 5-104363-2 5-103639-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-103908-3 5-104362-3 5-103669-3 5-103735-3 5-104363-3 5-103639-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-103908-4 5-104362-4 5-103669-4 5-103735-4 5-104363-4 5-103639-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-103908-5 5-104362-5 5-103669-5 5-103735-5 5-104363-5 5-103639-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-103908-6 5-104362-6 5-103669-6 5-103735-6 5-104363-6 5-103639-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-103908-7 5-104362-7 5-103669-7 5-103735-7 5-104363-7 5-103639-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-103908-8 5-104362-8 5-103669-8 5-103735-8 5-104363-8 5-103639-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103908-9 5-104362-9 5-103669-9 5-103735-9 5-104363-9 5-103639-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103908-0 6-104362-0 6-103669-0 6-103735-0 6-104363-0 6-103639-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103908-1 6-104362-1 6-103669-1 6-103735-1 6-104363-1 6-103639-1 13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103908-2 6-104909-2 6-103669-2 6-103735-2 6-104910-2 6-103639-2 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103908-3 6-104909-3 6-103669-3 6-103735-3 6-104910-3 6-103639-3 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103908-4 6-104909-4 6-103669-4 6-103735-4 6-104910-4 6-103639-4 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103908-5 6-104909-5 6-103669-5 6-103735-5 6-104910-5 6-103639-5 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103908-6 6-104909-6 6-103669-6 6-103735-6 6-104910-6 6-103639-6 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103908-7 6-104909-7 6-103669-7 6-103735-7 6-104910-7 6-103639-7 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103908-8 6-104909-8 6-103669-8 6-103735-8 6-104910-8 6-103639-8 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103908-9 6-104909-9 6-103669-9 6-103735-9 6-104910-9 6-103639-9 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103908-0 7-104909-0 7-103669-0 7-103735-0 7-104910-0 7-103639-0 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103908-1 7-104909-1 7-103669-1 7-103735-1 7-104910-1 7-103639-1 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103908-2 7-104909-2 7-103669-2 7-103735-2 7-104910-2 7-103639-2 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103908-3 7-104909-3 7-103669-3 7-103735-3 7-104910-3 7-103639-3 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103908-4 7-104909-4 7-103669-4 7-103735-4 7-104910-4 7-103639-4 notes: 1. selectively loaded headers are available, consult tyco electronics. 2. use keying tool no. 91417-1 to remove post for keying.
246 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, shrouded latching, single-row .100 [2.54] centerline ampmodu interconnection system mte headers 5 .025 [0.64] square right-angle post material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire post recommended pc board hole layout *.003 [0.08]; tolerance not to accumulate within one connector pattern. recommended pc board hole layout (pc board thickness (for holddown feature) is .062.008 [1.570.20]) *.003 [0.08]; tolerance not to accumulate within one connector pattern. .535 [13.59] with holddown .060 [1.52] .120 [3.05] .200 [5.08] .130 [3.30] .060 [1.52] .100 [2.54] .100 [2.54] ty p. .200 [5.08] ref. (contact area) .230 [5.84] .350 [8.89] a b c x x .275 [6.99] .365 [9.27] .145 [3.68] .100* [2.54] ty p. .340.003 [8.640.08] ty p. .055.003 [1.400.08] ty p. c .035.003 [0.890.08] dia. typ. .134.003 [3.400.08] dia. (2 plc.) .535 [13.59] .060 [1.52] .120 [3.05] .200 [5.08] .130 [3.30] .060 [1.52] .100 [2.54] .100 [2.54] ty p. .200 [5.08] ref. (contact area) .230 [5.84] .350 [8.89] a b c x x .275 [6.99] .145 [3.68] .100* [2.54] ty p. c .035.003 [0.890.08] dia. typ. section x-x section x-x position no. 1 indicator position no. 1 indicator without holddown related product data mateable ampmodu mte products ? receptacle assemblies (latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
247 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, shrouded latching, single-row .100 [2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mte headers 5 no. of dimensions latching header with hold down latching header without hold down pos. a b c plating a plating b plating c plating a plating b plating c 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-103904-1 5-103673-1 5-103672-1 5-104935-5 5-103635-1 5-103634-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-103904-2 5-103673-2 5-103672-2 5-104935-3 5-103635-2 5-103634-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-103904-3 5-103673-3 5-103672-3 5-104935-1 5-103635-3 5-103634-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-103904-4 5-103673-4 5-103672-4 5-104935-6 5-103635-4 5-103634-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-103904-5 5-103673-5 5-103672-5 5-104935-7 5-103635-5 5-103634-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-103904-6 5-103673-6 5-103672-6 5-104935-8 5-103635-6 5-103634-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-103904-7 5-103673-7 5-103672-7 5-104935-2 5-103635-7 5-103634-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-103904-8 5-103673-8 5-103672-8 5-104935-9 5-103635-8 5-103634-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103904-9 5-103673-9 5-103672-9 6-104935-0 5-103635-9 5-103634-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103904-0 6-103673-0 6-103672-0 6-104935-1 6-103635-0 6-103634-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103904-1 6-103673-1 6-103672-1 5-104935-4 6-103635-1 6-103634-1 13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103904-2 6-103673-2 6-103672-2 6-104935-2 6-103635-2 6-103634-2 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103904-3 6-103673-3 6-103672-3 6-104935-3 6-103635-3 6-103634-3 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103904-4 6-103673-4 6-103672-4 6-104935-4 6-103635-4 6-103634-4 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103904-5 6-103673-5 6-103672-5 6-104935-5 6-103635-5 6-103634-5 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103904-6 6-103673-6 6-103672-6 6-104935-6 6-103635-6 6-103634-6 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103904-7 6-103673-7 6-103672-7 6-104935-7 6-103635-7 6-103634-7 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103904-8 6-103673-8 6-103672-8 6-104935-8 6-103635-8 6-103634-8 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103904-9 6-103673-9 6-103672-9 6-104935-9 6-103635-9 6-103634-9 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103904-0 7-103673-0 7-103672-0 7-104935-0 7-103635-0 7-103634-0 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103904-1 7-103673-1 7-103672-1 7-104935-1 7-103635-1 7-103634-1 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103904-2 7-103673-2 7-103672-2 7-104935-2 7-103635-2 7-103634-2 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103904-3 7-103673-3 7-103672-3 7-104935-3 7-103635-3 7-103634-3 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103904-4 7-103673-4 7-103672-4 7-104935-4 7-103635-4 7-103634-4 notes: 1. selectively loaded headers are available, consult tyco electronics. 2. use keying tool no. 91417-1 to remove post for keying.
248 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, shrouded latching, single-row .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte headers 5 .025 [0.64] square straight post (with swaged tails and pc board orientation) material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, plated .000100 [0.00254] tin over .000050 [0.00127] nickel on entire post related product data mateable ampmodu mte products ? receptacle assemblies (polarized/latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 .535 [13.59] .120 [3.05] .100* [2.54] x x a .260 [6.60] ty p. no. of dimensions latching pos. abc header 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104450-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104450-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104450-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104450-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104450-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104450-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104450-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104450-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104450-9 section x-x .060 [1.52] (2 plc.) .200 [5.08] b c .060 [1.52] .100 [2.54] ty p. .050 [1.27] .100 [2.54] .070 [1.78] .050 [1.27] dia. c .065.003 [1.650.08] dia. .135.003 [3.430.08] .075.003 [1.910.08] .040.003 dia. typ. [1.020.08] (for retention tails) .230 [5.84] .130 [3.30] .350 [8.89] swaged retention tail (see note) *.003 [0.08]; tolerances not to accumulate within one connector pattern. note: swaged retention tails are provided in a minimum of two locations per header. recommended pc board hole layout position no. 1 indicator
249 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, through-hole, surface mount compatible, shrouded polarized/latching, single-row .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte headers 5 .025 [0.64] square straight post (with swaged tails and pc board orientation) .120 [3.05] .100 [2.54] .130 [3.30] .060 [1.52] .230 [5.84] .060 [1.52] .535 [13.59] b c x x .262 [6.65] .350 [8.89] .200 [5.08] ref. ty p. no. of dimensions polarized/latching pos. abc header, high-temp 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104809-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104809-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104809-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104809-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104809-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104809-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104809-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104809-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104809-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-104809-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104809-1 material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min tin on solder tail, with entire post underplated .000050 [0.00127] nickel related product data mateable ampmodu mte products ? receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 receptacle assemblies (polarized latching) ? pages 230, 231 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 section x-x a (contact area) .100 [2.54] .200 [5.08] .100* [2.54] ty p. swaged retention tail (see note) position no. 1 indicator .020.002 [0.510.05] ty p. header profile (shown for orientation purposes only) .040.002 [1.020.05] ty p. .040.003 dia. typ. [1.020.08] plated-thru hole recommended pc board hole layout (stencil thickness = .010 [0.25]) *.003 [0.08] tolerance not to accumulate within one connector pattern .135.003 [3.430.08] .065.003 [1.650.08] .075.003 [1.900.08] .180.002 [4.570.05]
250 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, polarized/latching, through-hole, surface mount compatible, single-row, .100 [2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mte headers 5 section x-x b x .535 [13.59] a .262 [6.65] .200 [5.08] ref. (contact area) .060 [1.52] (2 plc.) .120 [3.05] .060 [1.52] .100 [2.54] .180 [4.57] .350 [8.89] .145 [3.68] .230 [5.84] .100* [2.54] ty p. .058.003 [1.470.08] (2 plc.) .340.003 [8.640.08] .090.002 [2.290.05] .035.003 dia. typ. [0.890.08] plated-thru hole *.003 [0.08]; tolerance is not to accumulate within one connector pattern. recommended pc board (stencil thickness = .010 [0.25]) .025 [0.64] square right-angle post (with holddown) material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, duplex plated .000015 [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder tail, with entire post underplated .000050 [0.00127] nickel related product data mateable ampmodu mte products ? receptacle assemblies (polarized/ latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 x c .100 [2.54] ty p. .093 +.003 .093 -.000 2.36 +0.08 .093 -.000 .145 [3.68] .200 [5.08] .070.002 [1.780.51] ty p. dia. (2 plc.) ] [ c no. of dimensions right-angle header pos. abc with hold down 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104361-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104361-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104361-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104361-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104361-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104361-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104361-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104361-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104361-9 11 1.200 [30.48] 1.120 [28.44] 1.000 [25.40] 6-104361-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104361-1 13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-104361-2 no. of dimensions right-angle header pos. abc with hold down 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-104361-3 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-104361-4 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-104361-5 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-104361-6 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-104361-7 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-104361-8 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-104361-9 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-104361-0 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-104361-1 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-104361-2 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-104361-3 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-104361-4 position no. 1 indicator
251 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system mte headers 5 note: all part numbers are rohs compliant. no. of dimensions right-angle latching smt headers pos. a b c d e plating a plating b plating c 2 .400 [10.16] . 220 [5.59] .100 [2.54] .140 [3.56] .290 [7.37] 5-147323-1 5-147278-1 5-147324-1 3 .500 [12.70] . 320 [8.13] .200 [5.08] .190 [4.83] .390 [9.91] 5-147323-2 5-147278-2 5-147324-2 4 .600 [15.24] . 420 [10.67] .300 [7.62] .240 [6.10] .490 [12.45] 5-147323-3 5-147278-3 5-147324-3 5 .700 [17.78] . 520 [13.21] .400 [10.16] .290 [7.37] .590 [14.99] 5-147323-4 5-147278-4 5-147324-4 6 .800 [20.32] . 620 [15.75] .500 [12.70] .340 [8.64] .690 [17.53] 5-147323-5 5-147278-5 5-147324-5 7 .900 [22.86] . 720 [18.29] .600 [15.24] .390 [9.91] .790 [20.07] 5-147323-6 5-147278-6 5-147324-6 8 1.000 [25.40] . 820 [20.83] .700 [17.78] .440 [11.18] .890 [22.61] 5-147323-7 5-147278-7 5-147324-7 9 1.100 [27.94] . 920 [23.37] .800 [20.32] .490 [12.45] .990 [25.15] 5-147323-8 5-147278-8 5-147324-8 10 1.200 [30.48] 1.020 [25.91] .900 [22.86] .540 [13.72] 1.090 [27.69] 5-147323-9 5-147278-9 5-147324-9 11 1.300 [33.02] 1.120 [28.45] 1.000 [25.40] .590 [14.99] 1.190 [30.23] 6-147323-0 6-147278-0 6-147324-0 12 1.400 [35.56] 1.220 [30.99] 1.100 [27.94] .640 [16.26] 1.290 [32.77] 6-147323-1 6-147278-1 6-147324-1 13 1.500 [38.10] 1.320 [33.53] 1.200 [30.48] .690 [17.53] 1.390 [35.31] 6-147323-2 6-147278-2 6-147324-2 14 1.600 [40.64] 1.420 [36.07] 1.300 [33.02] .740 [18.80] 1.490 [37.85] 6-147323-3 6-147278-3 6-147324-3 15 1.700 [43.18] 1.520 [38.61] 1.400 [35.56] .790 [20.07] 1.590 [40.39] 6-147323-4 6-147278-4 6-147324-4 16 1.800 [45.72] 1.620 [41.15] 1.500 [38.10] .840 [21.34] 1.690 [42.93] 6-147323-5 6-147278-5 6-147324-5 17 1.900 [48.26] 1.720 [43.69] 1.600 [40.64] .890 [22.61] 1.790 [45.47] 6-147323-6 6-147278-6 6-147324-6 18 2.000 [50.80] 1.820 [46.23] 1.700 [43.18] .940 [23.88] 1.890 [48.01] 6-147323-7 6-147278-7 6-147324-7 19 2.100 [53.34] 1.920 [48.77] 1.800 [45.72] .990 [25.15] 1.990 [50.55] 6-147323-8 6-147278-8 6-147324-8 20 2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09] 6-147323-9 6-147278-9 6-147324-9 21 2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63] 7-147323-0 7-147278-0 7-147324-0 22 2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17] 7-147323-1 7-147278-1 7-147324-1 23 2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71] 7-147323-2 7-147278-2 7-147324-2 24 2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25] 7-147323-3 7-147278-3 7-147324-3 25 2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79] 7-147323-4 7-147278-4 7-147324-4 material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, plated as follows: plating a ? duplex plated .000030 [.00076] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. plating b ? duplex plated .000015 [.00038] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. plating c ? .000100 [.00254] tin over .000050 [.00127] nickel on entire post recommended pc board layout (refer to mte application spec. 114-25026 for stencil aperture layout using .006 [0.152] or .008 [0.203] stencil thickness) related product data mateable ampmodu mte products ? receptacle assemblies (polarized/ latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 .535 [13.59] .140 [3.56] .165.003 [4.190.07] .133 [3.38] .265 [6.73] d e c .070.002 ty p [1.780.05] .054/.039 [1.37/0.99] ?.085.002 [2.160.05] .136.001 [3.450.02] 2 plc .190.001 [4.830.02] 2 plc .065 min pad on [1.65] underside 2 plc .038 2 plc [0.97] .120 [3.05] a b c k k .120 [3.05] .350 [8.89] .200 [5.08] ref contact area .200 [5.08] .002 [0.05] see l view l .076 [1.93] .288 [7.32] ref .262 [6.65] .457 [11.61] ref position no. 1 indicator ? .047 + .002 -.003 [ 1.19 + 0.05 - 0.07 ] .140.002 [3.560.05] (tangent of heel) (plated thru hole) .025 [0.64] ty p. section k-k recommended pc board layout mte headers, right-angle, polarized/latching, surface mount
252 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mte headers, vertical, polarized/latching, surface mount ampmodu interconnection system mte headers 5 .075 [1.90] .535 [13.59] .063 [1.52] e .025 typ. [0.62] .313 [7.62] a b k k .025 [0.64] typ. .100 [2.54] .200 [5.08] .120 [3.05] .230 [5.84] pick and place cap position no. 1 indicator position no. 1 .100 [2.54] ty p. .055.003 [1.400.08] ? .052 + .002 ? .003 [ 1.32 + 0.05 ? 0.07 ] .070.002 [1.780.05] .088.003 [2.250.08] d c 0.06 [1.53] .113 [2.88] .227 [5.76] no. of dimensions vertical smt headers pos. a b c d e plating a plating b plating c 2 .300 [7.62] .220 [5.59] .100 [2.54] .220 [5.60] .110 [2.80] 5-1375583-1 5-1375582-1 5-1375549-1 3 .400 [10.16] .320 [8.13] .200 [5.08] .320 [8.14] .160 [4.07] 5-1375583-2 5-1375582-2 5-1375549-2 4 .500 [12.70] .420 [10.67] .300 [7.62] .420 [10.68] .210 [5.34] 5-1375583-3 5-1375582-3 5-1375549-3 5 .600 [15.24] .520 [13.21] .400 [10.16] .520 [13.22] .260 [6.61] 5-1375583-4 5-1375582-4 5-1375549-4 6 .700 [17.78] .620 [15.75] .500 [12.70] .620 [15.76] .310 [7.88] 5-1375583-5 5-1375582-5 5-1375549-5 7 .800 [20.32] .720 [18.29] .600 [15.24] .720 [18.30] .360 [9.15] 5-1375583-6 5-1375582-6 5-1375549-6 8 .900 [22.86] .820 [20.83] .700 [17.78] .820 [20.84] .410 [10.42] 5-1375583-7 5-1375582-7 5-1375549-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] .920 [23.38] .460 [11.69] 5-1375583-8 5-1375582-8 5-1375549-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 1.020 [25.92] .510 [12.96] 5-1375583-9 5-1375582-9 5-1375549-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 1.120 [28.46] .560 [14.23] 6-1375583-0 6-1375582-0 6-1375549-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 1.220 [31.00] .610 [15.50] 6-1375583-1 6-1375582-1 6-1375549-1 13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 1.320 [33.54] .660 [16.77] 6-1375583-2 6-1375582-2 6-1375549-2 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 1.420 [36.08] .710 [18.04] 6-1375583-3 6-1375582-3 6-1375549-3 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 1.520 [38.62] .760 [19.31] 6-1375583-4 6-1375582-4 6-1375549-4 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 1.620 [41.16] .810 [20.58] 6-1375583-5 6-1375582-5 6-1375549-5 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 1.720 [43.70] .860 [21.85] 6-1375583-6 6-1375582-6 6-1375549-6 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 1.820 [46.24] .910 [23.12] 6-1375583-7 6-1375582-7 6-1375549-7 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 1.920 [48.78] .960 [24.39] 6-1375583-8 6-1375582-8 6-1375549-8 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 2.020 [51.32] 1.010 [25.66] 6-1375583-9 6-1375582-9 6-1375549-9 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 2.120 [53.86] 1.060 [26.93] 7-1375583-0 7-1375582-0 7-1375549-0 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 2.220 [56.40] 1.110 [28.20] 7-1375583-1 7-1375582-1 7-1375549-1 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 2.320 [58.94] 1.160 [29.47] 7-1375583-2 7-1375582-2 7-1375549-2 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 2.420 [61.48] 1.210 [30.74] 7-1375583-3 7-1375582-3 7-1375549-3 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 2.520 [64.02] 1.260 [32.01] 7-1375583-4 7-1375582-4 7-1375549-4 material and finish housing ? black thermoplastic, 94v-0 rated posts ? brass, plated as follows: plating a ? duplex plated .000030 [.00076] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. plating b ? duplex plated .000015 [.00038] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. plating c ? .000100 [.00254] tin over .000050 [.00127] nickel on entire post recommended pc board layout (refer to mte application spec. 114-25026 for stencil aperature layout using .006 [0.152] or .008 [0.203] stencil thickness related product data mateable ampmodu mte products ? receptacle assemblies (polarized/ latching) ? pages 230, 231 receptacle assemblies with guide ribs (installed in single-row coupling shroud) ? pages 232, 233, 235, 240 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026 ? plated thru-hole section k-k note: all part numbers are rohs compliant. recommended pc board layout
253 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 interchangeable contacts, wire crimp (snap-in) ampmodu interconnection system mte headers 5 material and finish copper alloy c7025, plated as follows: plating a ? duplex plated .000030 [0.00076] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel plating b ? duplex plated .000015 [0.00038] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel plating c ? .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on entire contact .068 [1.73] cc .060 [1.52] .460 [11.68] section c - c .012 [0.30] gap heavy duty miniature wire size applicator for applicator for range ins. finish contact part no. amp-o-matic hand awg [mm 2 ] dia. (standard pressure) amp-o-lectric stripper/crimper tool range strip form loose piece machine* machine nos. .025-.060 plating a 1-104481-1 1-104481-3 32-28 0.03-0.08 0.64-1.52 plating b 1-104481-0 1-104481-2 567296-2 466980-1 91518-1 plating c 5-104481-2 5-104481-6 .025-.060 plating a 1-104480-3 1-104480-6 26-22 0.13-0.3 0.64-1.52 plating b 1-104480-2 1-104480-5 567297-2 466981-1 91518-1 plating c 1-104480-7 1-104480-4 .025-.060 plating a 1-104479-0 1-104479-3 24-20 0.2-0.5 0.64-1.52 plating b 104479-9 1-104479-2 567298-2 466982-1 91551-1 plating c 104479-8 1-104479-1 *for use with model ?k? machines. call the technical support center (1-800-522-6752) for part nos. of applicators for use with the model ?g? machines (shown on page 270), as well as other bench machines and fully automatic ampomator lead making machines. note: these wire crimp contacts can be intermixed with insulation displacement crimp contacts. keying plug part no. 104072-1 ten plugs are supplied per strip. order quantity reflects the number of strips required. extraction/lance reset tool no. 843477-1 short point receptacles related product data performance characteristics ? page 221 housings used in ? short point?pages 223, 224 ampmodu mte unloaded housings ? pages 228-233 application tooling ? pages 270-272 technical documents ? pages 277, 278 product specification 108-1472, 108-1472-1 application specification 114-25038 note: all part numbers are rohs compliant.
254 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 interchangeable contacts, wire crimp (snap-in) (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mte contacts 5 material and finish phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold on contact area, .000030 [0.00076] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold on contact area, .000030 [0.00076] min. tin on solder area, with entire contact underplated .000050 [0.00127] nickel plating c ? .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact extraction/lance reset tool no. 843477-1 contact heavy duty applicator for wire size ins. dia. part no. miniature applicator amp-o-matic hand range range finish (standard pressure) for amp-o-lectric stripper/ tool awg [mm 2 ] strip loose machine* crimper nos. form piece machine .025-.054 plating a 5-104506-6 5-104506-7 32-28 0.03-0.08 0.64-1.37 plating b 5-104506-4 5-104506-5 ? ? 58342-2 plating c 5-104506-2 5-104506-3 .036-.054 plating a 5-104505-6 5-104505-7 26-22 0.14-0.32 0.91-1.37 plating b 5-104505-4 5-104505-5 567239-2 466983-1 91531-1 plating c 5-104505-2 5-104505-3 *for use with amp-o-lectric model ?k? machines. call technical support center (1-800-522-6752) for part nos. of applicators for use with the amp-o-lectric model ?g? machines (shown on page 270), as well as other bench machines and fully automatic ampomator lead making machines. note: these wire crimp contacts can be intermixed with insulation displacement crimp contacts. .025 [0.64] .810 [20.57] .025 [0.64] pins related product data performance characteristics ? page 221 ampmodu mte unloaded housings ? pages 228-233 application tooling ? pages 270-272 technical documents ? pages 277, 278 product specification 108-25034 application specification 114-25026
255 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208a mt and shielded mt interconnection system ampmodu interconnection system note: all part numbers are rohs compliant. mt and shielded mt interconnection system 5 wire-to-board 5-102398-8 d-r assembly 102396-8 hermaphroditic covers 5-102398-8 d-r assembly 102396-8 hermaphroditic covers 5-102398-8 d-r assembly 102537-8 ejection cover 102536-8 back cover 5-102398-8 d-r assembly 102681-5 latching cover 102536-8 back cover 5-102398-8 d-r assembly 102540-8 polarizing cover 102536-8 back cover 5-102398-8 d-r assembly 102541-8 non-polarizing cover 102536-8 back cover 102185-2 latch 5102154-4 header 5-103168-8 hdr 5-103166-8 header 5-103166-8 header performance characteristics contact current rating ? 3 amperes for single contact in free air. (amperage could vary due to ambient temperature, wire size and duty cycles.) operating temperature ? -65c to +105c termination resistance ? 12 milliohms max. max. mating force ? high pressure - 26 oz. [7.23 n] standard pressure - 9 oz. [2.50 n] min. unmating force ? high pressure ? 5 oz. [1.39 n] standard pressure ? 1.5 oz. [0.417 n] contact retention in housing ? 5 lb. [22.24 n] per contact min. product facts full line of mass termination tooling offers lowest installed cost for most production needs dual cantilever beams with anti-overstress features provide redundant contact of mating post and limit beam deflection, preventing permanent deformation redundant insulation displacement slots provide for maximum reliability integral wire strain relief on contact can prevent wire motion from being transmitted to wire termination areas built-in contact post stop can protect terminated wire from being disturbed by over-insertion of mating post, prevents wire from entering contact area and positively limits mating connector depth insulation displacement contacts and crimp, snap-in contacts are interchangeable complete serviceability with replacement contacts cover styles include low profile (polarized, non-polarized, latching and ejection) and standard profile (hermaphroditic and ejection) connector housings may be stacked end-to-end within one pair of covers. all varieties of covers in this catalog are suitable for multiple housing stacking applications similar to the example illustrated in the photograph to the right recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 the ampmodu mt and shielded mt interconnection system offers labor and cost savings through mass termination technology, while maintaining the time- proven reliability of the ampmodu product family. the mt system is comprised of preloaded, double-row receptacle assemblies with snap-on covers and a variety of shielding hardware and accessories. the system is supported by a full line of mass termination tooling to meet virtually most produc- tion needs. the insulation displacement contact, the heart of the mt system, features a mating interface that is the same as the conventional ampmodu crimp, snap-in contact, fea- turing dual cantilever beams, built-in overstress protection and a completely enclosed ?box? design. to reduce emi/esd (electro- magnetic interference/ electrostatic discharge) at the input-output interface, add-on metal shields can be used to convert s tandard mt connectors to shielded mt connectors. typical application of end-to-end stacking r r
256 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mt receptacle assemblies, double-row .100 x .100 [2.54 x 2.54] centerline ampmodu interconnection system note: all part numbers are rohs compliant. mt receptacle assemblies 5 material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? copper alloy, duplex plated .000030 [0.00076] gold in mating area, .000050 [0.00127] tin on solder tail, with entire contact underplated .000050 [0.00127] nickel related product data mateable connectors ? pages 117, 122, 126, 130, 264 cable insulation wall thickness ? .015 [0.39] max. cable insulation diameter ? .050 [1.27] max. mating post length ? .222-.273 [5.64-6.94] max. performance characteristics ? page 255 replacement contacts ? page 265 connector covers ? pages 258, 259 application tooling ? pages 273-275 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 housings pre-loaded with standard pressure contacts a max. 1 b .100 [2.54] .600 [15.24] .125 [3.18] .100 [2.54] ty p. .270 [6.86] part nos. (stamped) no. of dimensions wire size range unloaded pos. ab 30-26 awg 26-22 awg 22-20 awg housings [0.05-0.15 mm 2 ] [0.12-0.3 mm 2 ] [0.3-0.6 mm 2 ] 6 .300 [7.62] .200 [5.08] 5-102393-1 5-102398-1 5-102448-1 102394-1 8 .400 [10.16] .300 [7.62] 5-102393-2 5-102398-2 5-102448-2 102394-2 10 .500 [12.70] .400 [10.16] 5-102393-3 5-102398-3 5-102448-3 102394-3 12 .600 [15.24] .500 [12.70] 5-102393-4 5-102398-4 5-102448-4 102394-4 14 .700 [17.78] .600 [15.24] 5-102393-5 5-102398-5 5-102448-5 102394-5 16 .800 [20.32] .700 [17.78] 5-102393-6 5-102398-6 5-102448-6 102394-6 18 .900 [22.86] .800 [20.32] 5-102393-7 5-102398-7 5-102448-7 102394-7 20 1.000 [25.40] .900 [22.86] 5-102393-8 5-102398-8 5-102448-8 102394-8 22 1.100 [27.94] 1.000 [25.40] 5-102393-9 5-102398-9 5-102448-9 102394-9 24 1.200 [30.48] 1.100 [27.94] 6-102393-0 6-102398-0 6-102448-0 1-102394-0 26 1.300 [33.02] 1.200 [30.48] 6-102393-1 6-102398-1 6-102448-1 1-102394-1 28 1.400 [35.56] 1.300 [33.02] 6-102393-2 6-102398-2 6-102448-2 1-102394-2 30 1.500 [38.10] 1.400 [35.56] 6-102393-3 6-102398-3 6-102448-3 1-102394-3 32 1.600 [40.64] 1.500 [38.10] 6-102393-4 6-102398-4 6-102448-4 1-102394-4 34 1.700 [43.18] 1.600 [40.64] 6-102393-5 6-102398-5 6-102448-5 1-102394-5 40 2.000 [50.80] 1.900 [48.26] 6-102393-8 6-102398-8 6-102448-8 1-102394-8 50 2.500 [63.50] 2.400 [60.96] 7-102393-3 7-102398-3 7-102448-3 2-102394-3 60 3.000 [76.20] 2.900 [73.66] 7-102393-8 7-102398-8 7-102448-8 2-102394-8 64 3.200 [81.28] 3.100 [78.74] 8-102393-0 8-102398-0 8-102448-0 3-102394-0 note: contact extraction/lance reset tool no. 843477-3 , see page 265. part no. 86286-1 (plugs into receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) 1 1 1 1 1 1 circuit no. 1 identifier contact i.d. no. .050 [1.27] .070 [1.78] .240 [6.10] right-angle header mt receptacle assembly pc board .270 [6.86] .300 [7.62]
257 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mt receptacle assemblies, double-row .100 x .100 [2.54 x 2.54] centerline (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mt receptacle assemblies 5 material and finish housing ? glass-filled thermoplastic, black, 94v-0 rated contacts ? copper alloy, duplex plated .000030 [0.00076] gold in mating area, .000050 [0.00127] tin on solder tails, with entire contact underplated .000050 [0.00127] nickel related product data mateable connectors ? pages 117, 122, 126, 130, 264 cable insulation wall thickness ? .015 [0.39] max. cable insulation diameter ? .050 [1.27] max. mating post length ? .200-.273 [5.64-6.94] max. performance characteristics ? page 255 replacement contacts ? page 265 connector covers ? pages 258, 259 application tooling ? pages 273-275 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 housings pre-loaded with high pressure contacts a max. 4 b .100 [2.54] .600 [15.24] .125 [3.18] .100 [2.54] ty p. .270 [6.86] part nos. (stamped*) no. of dimensions wire size range pos. ab 30-26 awg 26-22 awg 22-20 awg [0.05-0.15 mm 2 ] [0.12-0.3 mm 2 ] [0.3-0.6 mm 2 ] 6 .300 [7.62] .200 [5.08] 5-102693-1 5-102694-1 5-102695-1 8 .400 [10.16] .300 [7.62] 5-102693-2 5-102694-2 5-102695-2 10 .500 [12.70] .400 [10.16] 5-102693-3 5-102694-3 5-102695-3 12 .600 [15.24] .500 [12.70] 5-102693-4 5-102694-4 5-102695-4 14 .700 [17.78] .600 [15.24] 5-102693-5 5-102694-5 5-102695-5 16 .800 [20.32] .700 [17.78] 5-102693-6 5-102694-6 5-102695-6 18 .900 [22.86] .800 [20.32] 5-102693-7 5-102694-7 5-102695-7 20 1.000 [25.40] .900 [22.86] 5-102693-8 5-102694-8 5-102695-8 *cavity identification ? first cavity (one side); tyco electronics part no. and date code stamped on housing where size permits . note: contact extraction/lance reset tool no. 843477-3 , see page 265. part no. 86286-1 (plugs into receptacle contact) material ? natural color nylon keying plugs part no. 87077-2 (plugs directly into housing) 1 circuit no. 1 identifier contact i.d. no. .050 [1.27] .240 [6.10] right-angle header mt receptacle assembly pc board .270 [6.86] .300 [7.62] 444 4444 44
258 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 low profile covers for double-row mt receptacle assemblies ampmodu interconnection system note: all part numbers are rohs compliant. mt low profile covers 5 l l .750 [19.05] material black thermoplastic, flame retardant related product data for use on double-row mt receptacle assemblies ? pages 256, 257 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 note: see page 259 for low profile cover part nos. front covers .095 [2.41] ty p. .468 [11.89] .150 [3.81] .750 [19.05] .750 [19.05] .750 [19.05] assembled* l l .480 [12.19] a - polarizing cover (mates with ampmodu 4-sided shrouded headers. refer to pages 117, 122, 126, 130.) b - latching cover (mates with ampmodu 4-sided shrouded headers with extraction slot. refer to pages 117, 122, 126, 130.) c - ejection cover (mates with amp-latch universal ejection style pin headers equipped with latching ears, part no. 102185-2 (with push tabs) or part no. 102312-2 (without push tabs), see tyco electronics catalog 82012. d - non-polarizing cover (designed for use with shielded connectors, pages 261 & 262; or for non-polarizing applications.) *dimension applies to cover when installed on connector housing. back covers e - for shielding and non-shielding applications (for use with any low profile cover.) f - for shielding applications (for use with non-polarizing cover only.)
259 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 standard profile covers for double-row mt receptacle assemblies ampmodu interconnection system note: all part numbers are rohs compliant. mt standard profile covers 5 .850 [21.59] material black thermoplastic, flame retardant related product data for use on double-row mt receptacle assemblies ? pages 256, 257 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 .095 [2.41] ty p. .150 [3.81] 1.120 [28.45] .468 [11.89] assembled* top view bottom view 1.120 [28.45] l g - hermaphroditic cover (two hermaphroditic covers can be used or one hermaphroditic cover can be used with an h ejection cover.) h - ejection cover (mates with amp-latch universal ejection style pin headers equipped with latching ears, part no. 102185-2 (with push tabs) or part no. 102312-2 (without push tabs), see tyco electronics catalog 82012. *dimension applies to cover when installed on connector housing. low profile covers standard profile covers front covers back covers no. of dimension egh pos. l abcds hielding and f hermaphroditic ejection polarizing latching ejection non-polarizing non-shielding shielding applications applications 6 .300 [7.62] 102540-1 ? 102537-1 102541-1 102536-1 ? 102396-1 ? 8 .400 [10.16] 102540-2 ? 102537-2 102541-2 102536-2 ? 102396-2 ? 10 .500 [12.70] 102540-3 ? 102537-3 102541-3 102536-3 ? 102396-3 ? 12 .600 [15.24] 102540-4 102681-1 102537-4 102541-4 102536-4 102823-5 102396-4 ? 14 .700 [17.78] 102540-5 102681-2 102537-5 102541-5 102536-5 102823-6 102396-5 ? 16 .800 [20.32] 102540-6 102681-3 102537-6 102541-6 102536-6 102823-7 102396-6 ? 18 .900 [22.86] 102540-7 102681-4 102537-7 102541-7 102536-7 102823-1 102396-7 ? 20 1.000 [25.40] 102540-8 102681-5 102537-8 102541-8 102536-8 102823-4 102396-8 103268-6 22 1.100 [27.94] 102540-9 102681-6 102537-9 102541-9 102536-9 102823-8 102396-9 ? 24 1.200 [30.48] 1-102540-0 102681-7 1-102537-0 1-102541-0 1-102536-0 102823-9 1-102396-0 103268-7 26 1.300 [33.02] 1-102540-1 102681-8 1-102537-1 1-102541-1 1-102536-1 1-102823-0 1-102396-1 103268-8 28 1.400 [35.56] 1-102540-2 102681-9 1-102537-2 1-102541-2 1-102536-2 1-102823-1 1-102396-2 ? 30 1.500 [38.10] 1-102540-3 1-102681-0 1-102537-3 1-102541-3 1-102536-3 1-102823-2 1-102396-3 103268-9 32 1.600 [40.64] ? 1-102681-1 1-102537-4 1-102541-4 1-102536-4 1-102823-3 1-102396-4 ? 34 1.700 [43.18] ? 1-102681-2 1-102537-5 1-102541-5 1-102536-5 1-102823-4 1-102396-5 1-103268-0 40 2.000 [50.80] ? 1-102681-5 1-102537-8 1-102541-8 1-102536-8 102823-2 1-102396-8 ? 50 2.500 [63.50] ? 2-102681-0 2-102537-3 2-102541-3 2-102536-3 102823-3 2-102396-3 1-103268-3 60 3.000 [76.20] ? ? 2-102537-8 2-102541-8 2-102536-8 ? 2-102396-8 ? 64 3.200 [81.28] ? ? 3-102537-0 3-102541-0 3-102536-0 ? 3-102396-0 ?
260 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 shielding hardware and accessories for mt interconnection system ampmodu interconnection system mt shielding hardware and accessories 5 product facts add-on shielding accessories for existing ampmodu standard mt and pc board mounted headers compact design tin plated copper alloy material redundant cantilever beams provide for good peripheral contact, eliminating the need for a separate rf gasket polarized mating 360 cable braid termination with cable jacket support cable shielding hardware permits molded cable terminations after assembly must be used with braided shielded cables solder tabs on right-angle header shields are self-retaining in a pc board shielded mt receptacles shielded right-angle headers the shielded ampmodu mt system features add-on metal shielding kits for double-row standard mt receptacle assemblies and double-row right-angle headers. cable shielding hardware consists of a ferrule and two stamped and formed shell halves. the inner shell half has a series of integral cantilever beams to provide good peripheral contact with the mating outer shell half. this feature also eliminates the need for a separate rf gasket. detents in the cantilever beam provide a positive lock when the two halves are mated. during assembly the inner and outer shell halves are snapped together over a terminated standard mt connector. shields for right-angle headers have integral cantilever beams which provide good contact with the mating shielded mt receptacle assembly, without the use of a separate rf gasket.
261 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 shielding hardware and accessories for double-row mt receptacle assemblies ampmodu interconnection system note: all part numbers are rohs compliant. mt shielding hardware and accessories 5 dimensions part nos. no. of ab c outer inner pos. shell shell 6 .410 [10.41] .817 [20.75] 1.268 [32.21] 102988-2 102987-6 10 .610 [15.49] .817 [20.75] 1.667 [42.34] 103137-2 103136-2 16 .910 [23.11] .950 [24.13] 1.925 [48.90] 103153-2 103152-2 26 1.410 [35.81] .950 [24.13] 1.925 [48.90] 103341-2 103340-2 40 2.110 [53.59] 1.325 [33.66] 2.468 [62.69] 104272-1 104271-1 50 2.610 [66.29] .950 [24.13] 2.468 [62.69] 103158-2 103157-2 note: match shield size to number of connector positions. outer shell half flare braid over assembled shells for crimping under ferrule ferrule purchased separately (see page 263) standard mt receptacle assembly purchased separately (refer to pages 256 & 257) two-piece shields? straight exit material and finish shell halves ? copper alloy, .020 [0.51] thick; pretinned .000030 [0.00076] min. related product data double-row mt receptacle assemblies ? pages 256, 257 non-polarizing covers (part no. series 102541 with back cover 102536 or 102823) ? pages 258, 259 shield ferrules ? page 263 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 a b c .326 [8.28] inner shell half
262 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 shielding hardware and accessories for double-row mt receptacle assemblies (continued) ampmodu interconnection system note: all part numbers are rohs compliant. mt shielding hardware and accessories 5 outer shell half flare braid over assembled shells for crimping under ferrule ferrule purchased separately (see page 263) standard mt receptacle assembly purchased separately (refer to pages 256 & 257) two-piece shields? right-angle exit material and finish shell halves ? copper alloy, .020 [0.51] thick; pretinned .000030 [0.00076] min. related product data double-row mt receptacle assemblies ? pages 256, 257 non-polarizing covers (part no. series 102541 with back cover 102536 or 102823) ? pages 258, 259 shield ferrules ? page 263 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 a b c .326 [8.28] inner shell half no. of dimensions part nos. pos. a b c outer shell inner shell 18 1.010 [25.65] 1.120 [28.45] 1.413 [35.89] 102784-2 102783-2 26 1.410 [35.81] 1.166 [29.62] 1.975 [50.17] 103139-2 103138-2 40 2.110 [53.59] 1.135 [28.83] 2.633 [66.88] 102786-2 102785-2 50 2.610 [66.29] .983 [24.97] 3.133 [79.58] 102788-2 102787-2 60 3.110 [78.99] 1.118 [28.40] 3.606 [91.59] 103141-2 103140-2 notes: 1. match shield size to number of connector positions. 2. hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after assembly. .125 [3.18] dia. (see note 2)
263 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system note: all part numbers are rohs compliant. mt shielding hardware and accessories 5 shielding hardware and accessories for double-row mt receptacle assemblies (continued) ferrules for shielding kits material and finish soft copper, tin plated related product data used with shielding kits ? pages 261, 262 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 amp-o-lectric model ?g? terminating machine tyco electronics hand tool 91410-1 (die set required, see table below) application tooling no. of straight-exit shields right-angle exit shields cable dia. ferrule applicator die* hand tool die sets pos. outer inner outer inner range part number assembly part no. insulation braid 6 102988-2 102987-6 ? ? 0.200 - 0.250 [5.08-6.35] 102985-4 812665-2 1-527116-8 527116-4 0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3 10 103137-2 103136-2 ? ? 0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3 0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3 0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3 16 103153-2 103152-2 ? ? 0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3 0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3 0.370-0.420 [9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3 0.190-0.240 [4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3 18 ? ? 102784-2 102783-2 0.250-0.300 [6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3 0.310-0.360 [7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3 0.370-0.420 [9.40-10.67] 5-102903-1 812665-3 1-527116-4 527116-3 0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2 26 103341-2 103340-2 103139-2 103138-2 0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2 0.320-0.370 [8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2 40 104272-1 104271-1 102786-2 102785-2 0.430-0.460 [10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2 0.380-0.420 [9.65-10.67] 5-102903-6 1-812665-5 1-527116-2 527116-1 50 103158-2 103157-2 102788-2 102787-2 0.430-0.460 [10.92-11.68] 5-102903-5 1-812665-4 1-527116-1 527116-1 0.470-0.520 [11.94-13.21] 5-102789-3 1-812665-3 1-527116-0 527116-1 0.470-0.520 [11.94-13.21] 5-102903-8 1-812665-8 ? ? 60 ? ? 103141-2 103140-2 0.500-0.545 [12.70-13.84] 5-102903-7 1-812665-7 ? ? 0.550-0.600 [13.97-15.24] 5-102789-4 1-812665-6 ? ? *for use with model ?k? machines. call the tyco electronics technical support center (1-800-522-6752) for part nos. of applicat ors for use with the amp-o-lectric model ?g? machines (also shown on page 270), as well as other bench machines and fully automatic ampomator lead m aking machines. notes: 1. ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately. 2. individual anvils and crimpers also may be purchased separately. 3. ferrule part number 1-102903-8 also requires spacer part number 527116-9.
264 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 shielded mt headers for use with shielded mt receptacle assemblies ampmodu interconnection system note: all part numbers are rohs compliant. mt shielded headers 5 ampmodu right-angle headers pc board mounted material and finish housing ? black thermoplastic, flame retardant posts ? copper alloy, plated .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post shield ? copper alloy, .020 [0.51] thick; pretinned .000030 [0.00076] min. related product data mating connectors ? double-row mt receptacle assemblies with shielding hardware ? pages 256-263 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032. instruction sheet 408-6532 .460 [11.68] .550 [13.97] .125 [3.18] .025 [0.64] sq. posts b a .755 [19.18] .290 [7.37] c shield .030 [0.76] .318 [8.08] .135 [3.43] .434 [11.02] right-angle header a a .725 [18.45] .145.003 [3.680.08] 2 plc. .145.003 [3.680.08] 2 plc. .100.003 [2.540.08] .550.003 [13.970.08] .040.003 [1.020.08] dia. (all holes) d .003 [0.08] 2d .003 [0.08] d .003 [0.08] 2d .003 [0.08] .100.003 [2.540.08] .050.003 [1.270.08] recommended pc board hole layout for 6, 8 and 10 positions recommended pc board hole layout for 16 thru 50 positions d - contact centerline is .100 [2.54]; .003 [0.08] tolerances not to accumulate within one connector pattern. no. of dimensions header shield pos. abc part nos. part nos. 6 .200 [5.08] .430 [10.92] .510 [12.95] 102792-6 102991-1 8 .300 [7.62] .530 [13.46] .610 [15.49] 102792-8 102991-2 10 .400 [10.16] .630 [16.00] .710 [18.03] 102792-1 102791-2 16 .700 [17.78] .930 [23.62] 1.010 [25.65] 102792-7 102791-3 18 .800 [20.32] 1.030 [26.16] 1.110 [28.19] 102792-2 102791-4 20 .900 [22.86] 1.130 [28.70] 1.210 [30.73] 102792-5 1-102791-0 26 1.200 [30.48] 1.430 [36.32] 1.510 [38.35] 102792-9 102791-1 50 2.400 [60.96] 2.630 [66.80] 2.710 [68.83] 102792-4 102791-8
265 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 replacement mt receptacle contacts ampmodu interconnection system note: all part numbers are rohs compliant. mt contacts 5 wire size range standard pressure high pressure receptacle receptacle awg [mm 2 ] contact ident. part no. contact ident. part no. 30-26 0.05-0.15 1 5-102395-2 4 5-102641-6 26-22 0.12-0.3 2 5-102399-1 5 5-102642-6 22-20 0.3-0.6 3 5-102449-6 ? ? note: termination tooling for mt receptacle insulation displacement contacts is shown on pages 273-275. insulation displacement contacts material and finish copper alloy, duplex plated .000030 [0.00076] gold in mating area, .000100- .000200 [0.00254-0.00508] tin in crimp area, with entire contact underplated .000050 [0.00127] nickel related product data performance characteristics ? page 255 application tooling ? pages 273-275 technical documents ? pages 277, 278 product specification 108-25015, 108-25018, 108-25030 application specification 114-25032 instruction sheet 408-6532 .050 [1.27] max. insulation diameter contact identification mt receptacle contacts incorporate the following features. cantilever beams wide misalignment tolerance anti- overstress the mt receptacle contact cross-section is primarily rectangular, with rounded corners. two integral cantilever beams contact the mating square male posts. deflection of these spring members is limited by anti-overstress and excessive permanent deformation is prevented. this feature allows a wide range for tolerance of misalignment of mating contacts. extraction/lance reset tool no. 843477-3 the configuration of the receptacle completely encloses the spring members helping to prevent damage during handling and assembly, and makes the system compatible with automatic application techniques.
266 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mini-tandem spring receptacle housings and contacts ampmodu interconnection system mini tandem spring housings and contacts 5 specifications contact current rating ? 3 amperes termination resistance ? 12 milliohms (max.) ? gold plated contacts 18 milliohms (max.) ? tin plated contacts durability ? ref. product specification 108-25031 product facts individual contacts mate with .025 [0.64] sq. posts, .125 [3.18] long crimp snap-in contacts accept 32-22 awg [0.03-0.32 mm 2 ] wire retention latch provides for positive installation no insertion tool required high durability design provides long life available with .000015 [0.00038] or .000030 [0.00076] thick gold inlay in contact areas, or bright tin plated closed-entry housings mini-contact box size: .060 [1.52] sq. mini-tandem spring housings can be stacked on .100 [2.54] centers in either direction mini-tandem spring housings are recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 mini-tandem spring receptacle contacts are designed to mate with .025 [0.64] posts. when used individually, they will mate with posts as short as .125 [3.18] and when used in a housing, they will mate with .140 [3.55] long posts. these versatile contacts may be used for interconnecting posted pc panels, i/o wiring and cross-connecting pin arrays. the receptacle contact's box configuration provides for long contact life with controlled contact mating forces which minimize wear. an external retention spring facilitates quick assembly and provides firm seating in a contact housing. mini-tandem spring receptacle contacts are used in single- or double- row housings with .100 [2.54] centerline spacing. single-row housings can be converted into double-row connectors on .100 x .200 [2.54 x 5.08] centers with the use of stacking clips. mini-tandem spring housings can be stacked side-by-side or end-to-end on .100 [2.54] centers. r r
267 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mini-tandem spring housings, single-row ampmodu interconnection system note: all part numbers are rohs compliant. spring housings 5 .100 [2.54] centerline material ? black glass-filled poly- ester, 94v-0 rated a max. .550 [13.97] no. of dimensions housing pos. abc part no. 2 .200 [5.08] 1 .100 [2.54] 530554-1 4 .400 [10.16] 3 .300 [7.62] 530554-3 8 .800 [20.32] 7 .700 [17.78] 530554-7 12 1.200 [30.48] 11 1.100 [27.94] 1-530554-1 16 1.600 [40.64] 15 1.500 [38.10] 1-530554-5 18 1.800 [45.72] 17 1.700 [43.18] 1-530554-7 20 2.000 [50.80] 19 1.900 [48.26] 1-530554-9 22 2.200 [55.88] 21 2.100 [53.34] 2-530554-1 note: mini-tandem spring contacts for use in these housings are shown on page 269. .030 [0.76] .050 [1.27] .100 [2.54] max. .100 [2.54] b spaces @ .100 [2.54] = c material ?natural color nylon, 94v-2 rated keying plug part no. 531226-1 (plugs directly into housing) .036 [0.91] .066 [1.68] .050 [1.27] minimum mating post length is .140 [3.55]. technical documents ? pages 277, 278 product specification 108-25031 application specification 114-25021
268 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mini-tandem spring housings, double-row ampmodu interconnection system note: all part numbers are rohs compliant. mini-tandem spring contacts 5 .100 [2.54] centerline material ? black glass-filled polyester, 94v-0 rated* a max. .550 [13.97] no. of dimensions housing pos. abc part no. 6 .300 [7.62] 2 .200 [5.08] 530902-1 8 .400 [10.16] 3 .300 [7.62] 530902-6 12 .600 [15.24] 5 .500 [12.70] 2-530902-0 16 .800 [20.32] 7 .700 [17.78] 3-530902-0 note: mini-tandem spring contacts for use in these housings are shown on page 269. .030 [0.76] .200 [5.08] .100 [2.54] b spaces @ .100 [2.54] = c material ? natural color nylon, 94v-2 rated keying plug part no. 531226-1 (plugs directly into housing) *consult tyco electronics for specific ul recognition. .036 [0.91] .066 [1.68] .050 [1.27] minimum mating post length is .140 [3.55]. .100 [2.54] max. technical documents ? pages 277, 278 product specification 108-25031 application specification 114-25021
269 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 mini-tandem spring contacts ampmodu interconnection system note: all part numbers are rohs compliant. mini-tandem spring housings 5 receptacle contacts material and finish phosphor bronze, plated as follows: plating a ? duplex plated .000030 [0.00076] gold inlay on contact area, matte tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating b ? duplex plated .000015 [0.00038] gold inlay on contact area, matte tin in crimp area, with entire contact underplated .000050 [0.00127] nickel plating c ? duplex plated .000050 [0.00127] over matte tin in contact area, over .000030 [0.00076] nickel on entire contact plating d ? .000100 [0.00254] min. matte tin over .000030 [0.00076] nickel on entire contact technical documents ? pages 277, 278 product specification 108-25031 application specification 114-25021 .060 [1.52] .085 [2.15] min. contact area with gold inlay .060 [1.52] low pressure contacts miniature applicator for wire size range ins. dia. contact part no. applicator for amp-o-matic awg mm 2 range finish strip form loose piece amp-o-lectric stripper/crimper machine* machine 26-22 0.14-0.32 0.36-0.54 plating a 5531216-3 5531216-4 466819-2 466943-1 [0.64-1.37] plating b 5531216-1 5531216-2 standard pressure contacts miniature applicator for wire size range ins. dia. contact part no. applicator for amp-o-matic awg mm 2 range finish strip form loose piece amp-o-lectric stripper/crimper machine* machine .025-.054 plating b 530901-2 530901-3 32-28 0.03-0.08 [0.64-1.37] plating c 5530901-6 5530901-7 466723-1 466952-1 plating d 5530901-4 5530901-5 .036-.054 plating b 5530553-4 ? 26-22 0.14-0.32 [0.91-1.37] plating c 5530553-6 ? 466819-2 466943-1 plating d 5530553-2 ? high pressure contacts miniature applicator for wire size range ins. dia. contact part no. applicator for amp-o-matic awg mm 2 range finish strip form loose piece amp-o-lectric stripper/crimper machine* machine 32-28 0.03-0.08 .025-.054 plating b 5531225-6 ? 466723-1 466952-1 [0.64-1.37] 26-22 0.14-0.32 .036-.054 plating b 5531224-6 ? 466819-2 466943-1 [0.91-1.37] *for use with amp-o-lectric model ?k? machines. call the tooling/technical assistance center (1-800-522-6752) for part nos. of applicators for use with the amp-o-lectric model ?g? machines (shown on page 270), as well as other bench machines and fully automatic ampomator lead making machines. notes: 1. mini-tandem spring receptacle contacts are for use only in the housings shown on pages 267 & 268. they cannot be used in ampmodu mod iv housings. 2. use hand tool no. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above. 3. application tooling is described on pages 270 & 275.
270 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling for wire crimp contacts ampmodu interconnection system application tooling 5 tooling shown on this page is designed to terminate wire crimp contacts used in various ampmodu wire-to- board connectors. refer to page 88 to determine the applicable connectors. this machine automatically strips as well as terminates individual wires. similar to the amp-o-lectric model ?g? machine, applicators are quickly interchangeable, and it includes precision adjustment for crimp height. all adjustments can be made from the front of the machine, without special tools. for further details, request tyco electronics catalog 65004. amp-o-matic stripper/crimper machine applicators several terminating machines, including the amp-o-lectric model ?g?, amp-o-matic stripper/ crimper and ampomator cls machines, are designed for use with interchangeable applicators. basic styles are quickly interchangeable to minimize costly downtimes, and feature dial-in wire and insulation crimp height settings. special applicators are available for use with the crimp force monitor (see page 272), for measuring the crimp height of each termination as it is made, plus evaluating the quality of each crimp. edge, electronic applicator counter the new versatile edge applicator counter tracks wearable tool usage for the most effective maintenance planning. the completely electronic counter with clear lcd display, indicates cycles since installation. by performing maintenance at measured intervals with pre-set limits, operators avoid breakdowns and rejects caused by tool wear or mid-adjustment. for more information, request catalog 1773385. a totally new design of our most popular machine for bench-top operation. it features a quiet and reliable direct motor drive, electronic controls for easy setup and operation, and improved guarding and lighting for operator convenience and safety. all versions include either manual or automatic precision adjustment for crimp height. for further details, request tyco electronics catalog 65828. heavy duty miniature applicators amp-o-lectric model ?g? terminating machine (shown with optional crimp force monitor)
271 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling for wire crimp contacts (continued) ampmodu interconnection system application tooling 5 as a value oriented terminator, the amp 3k/40 and amp 5k/40 are designed for customers that require the increased output and quality of a semiautomatic machine at a competitive price. by incorporating the most commonly requested features as standard and offering a long list of optional equipment, these terminators offer flexibility to meet the specific needs of various applications at the lowest possible cost. amp 3k/40 and amp 5k/40 terminators the combination of the stripping module with the amp-o-lectric model g terminator or the amp 3k/40, 5k/40 provides an economical, proficient method of stripping wire and crimping terminals on the same machine. wires are stripped moments before crimping, meaning there is virtually no chance of damaging wire conductors during handling or storage. once the wire is fed into the start sensor, the stripping module does the rest, improving placement accuracy. for more information, request catalog 1309085. optional stripping module for the amp 3k/40, amp 5k/40 and the amp-o-lectric model g amp 5k/40 terminator
272 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling for wire crimp contacts (continued) ampmodu interconnection system application tooling 5 tooling shown on this page is designed to terminate wire crimp contacts used in various ampmodu wire-to- board connectors. refer to page 88 to determine the applicable connectors. the ampomator system iii is an automatic machine for the production of terminated wire leads. the machine combines state of the art technology to process single and double wire application utilizing the wire processing industry?s best and most friendly subsystems and accessories available to meet the latest market requirements for wire lead production. the new machine incorporates a servo-driven, software-controlled amp-o-lectric st iii terminator and the next generation system iii applicator. see catalog 1654956-5 for more information. commercial grade hand tool for crimping various products. features ratchet control to provide complete crimp cycle. accepts both pinned- and shouldered- style die sets. locators are provided with pinned-style die sets for proper contact and wire positioning, and to help minimize contact rota- tion and bending during crimping. approximate weight 1.3 lb [0.60 kg]. your quality program calls for more than a good crimping system. it demands proof - the proof you get with the sle crimp force monitor. it has high- resolution piezo-quartz sensor technology for a more precise identification of typical crimping faults. the monitor features zone & peak force analysis, 128x128 dot matrix, force trigger and encoder proximity trigger, and absolute force measurement for real-time monitoring of every crimp. the cfm can be used with bench or fully-automatic machines. special applicators are not required. sure, you can sample and test crimp height with a micrometer. in fact, that?s how you standardize your process. but for ongoing quality control, testing every crimp, sle is the choice. it?s known worldwide, and meets our standards for a high performance terminating system. that?s how you can be sure. high quality crimping - with verification - means higher production and productivity. ampomator system iii leadmaker crimp force monitor (cfm) premium certi-crimp straight action hand tool (saht) commercial pro-crimper iii hand tool tyco electronics hand tools are ideal for small production and prototype applications. they feature ratchet control to help elimi- nate partial crimps, straight- line die closure, terminal locator and support, and insulation crimp adjustment. tyco electronics hand tools also can be adapted for use with pneumatic tooling assemblies, providing air operated crimping capabilities. for further details on tyco electronics straight action hand tools, request tyco electronics catalog 65780. for more details on tyco electronics pneumatic tooling assemblies, call the tyco electronics technical support center, 1-800-522-6752.
273 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling for insulation displacement crimp (idc) contacts and connectors ampmodu interconnection system note: all part numbers are rohs compliant. application tooling 5 pistol grip manual and air powered tools the manual pistol grip tool features an interchange- able modular terminating head which also can be used in the pneumatic ver- sion, the bench mount pneumatic power assembly and the idc electric power unit. the head terminates one unstripped wire per cycle and indexes the con- nector to the next terminat- ing position. the head rotates to permit optimum access to the wiring area. the bench mount pneumatic power assembly is air actu- ated with either a foot or knee switch. this capability frees the operator?s hands for optimum positioning. modular heads: 58062-1 (for mt connectors) 58336-1 (for mte connectors) 58395-1 (for level v idc connectors) 58540-1 (for mte connectors, discrete wire or flat ribbon cable) tooling shown on this page is designed to terminate idc contacts for various ampmodu wire-to-board connectors. refer to page 88 to determine the applica- ble connectors. bench mounted pneumatic power assembly no. 58338-1 idc electric power unit this electrically powered semiautomatic bench machine is designed for applying ampmodu mte and mt connectors to dis- crete wires. it is portable and compact and uses existing pistol grip modular heads. the heads are easily interchanged to run different products. *the idc electric power unit?s cycle rate is approximately 7,200 cycles per hour, with exact produc- tion rates depending upon operator dexterity. modular heads: 58062-1 (for mt connectors) 58336-1 (for mte connectors) pneumatic pistol grip tool no. 58075-1 manual pistol grip tool no. 58074-1 idc electric power unit no. 931800-1 *a tube-fed track assembly, part no. 856675-1, also can be used with mte connectors. this modular head tool can be used on any pistol grip tool. it was designed for dis- crete wire or flat ribbon cable applications. modular head tool no. 58540-1
274 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system note: all part numbers are rohs compliant. application tooling 5 tooling shown on this page is designed to terminate idc contacts for various ampmodu wire-to-board connectors. refer to page 88 to determine the appli- cable connectors. tube-fed ribbon cable machine 2700 lb. power unit with cable notching die equipped with a cable notching die an adapter kit, this fully pneumatic bench machine provides the 2700 lb [12 010n] force required for end-notching ribbon cable. it features a grooved cable support plate, a pressure plate and a cable stop to facilitate cable alignment and positioning during the notching process. notching dies: 854449-1 (for 24-22 awg [0.2-0.6 mm 2 ] wire 854449-2 (for 28-26 awg [0.08-0.15 mm 2 ] wire tube-fed ribbon cable machine no. 856002-1 2700 lb. power unit no. 312522-1 spring-driven unit which conveys connectors through the product tube to the terminating station. the air-operated terminating sta- tion positions and termi- nates contacts onto the notched cable. the seating station is manually operated and seats connector hous- ings onto the terminated contacts. designed for bench appli- cations, this machine is pneumatically operated and controlled by a foot pedal. it terminates connectors onto end-notched ribbon cable. *the connectors are sup- plied in strip form and in plastic tubes. the machine consists of three basic sub- assemblies: a feed track, a terminating station and a seating station. the feed track is a constant force, *at a rate of 13-25 positions at a time. application tooling for insulation displacement crimp (idc) contacts and connectors (continued)
275 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 ampmodu interconnection system note: all part numbers are rohs compliant. application tooling 5 application tooling for insulation displacement crimp (idc) contacts and connectors (continued) tooling shown on this page is designed to terminate idc contacts for various ampmodu wire-to-board connectors. refer to page 88 to determine the applica- ble connectors. champomator model 2.5 terminating machine no. 354786-(*) this compact bench machine terminates wires manually sorted from multiconductor cables. termination sequence may include full termination of all contacts, or selective termi- nation. designed for easy programming, the machine is microprocessor controlled and programmed by a membrane switch key- board. it also has an inter- nal storage capability for retaining up to 350 cable assemblies. connectors can be terminated with either straight or right-angle wire dress. *for applicable dash nos., call the technical support center: 1-800-522-6752. for further details, request tyco electronics catalog 82247 this floor model machine automatically sorts wires from multiconductor jack- eted cable and terminates them in a user-determined sequence; either full termina- tion of all contacts, or selec- tive termination. designed for easy programming, the machine is microprocessor controlled and programmed by a touchscreen. it also has an internal storage capability for retaining up to 50 cable assemblies. connectors can be terminated with either straight or right- angle wire dress. all cable assemblies are tested for continuity and shorts. *for applicable dash nos., call the technical support center: 1-800-522-6752. for further details, request tyco electronics catalog 82247 champomator model 3a terminating machine no. 761420-(*)
276 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 technical documents for board-to-board products ampmodu interconnection system note: all part numbers are rohs compliant. technical documents 5 product specifications describe technical performance characteristics and verification tests. they are intended for the design, component and quality engineers. pc/104 and pc/104- plus connectors ? pages 5-12: 108-1956 pc/104 and pc/104- plus connector systems receptacle assemblies and unshrouded breakaway headers, surface-mount ? pages 109, 110, 185-192: 108-25017 ampmodu interconnection system, two-piece 108-25022 ampmodu mod. iv interconnection system, vertical assemblies 108-25026 ampmodu mod. ii interconnection system, standard pressure receptacle assembly and header two-piece printed circuit board connectors ? pages 193-202: 108-16 action pin contacts 108-25017 ampmodu interconnection system, two-piece 108-25027 ampmodu mod. ii interconnection system, short-point receptacle assembly and header receptacle assemblies, horizontal and vertical board mount ? pages 168-192: 108-25022 ampmodu mod. iv interconnection system, vertical assemblies 108-25026 ampmodu mod. ii interconnection system, standard pressure receptacle assembly and header 108-25027 ampmodu mod. ii interconnection system, short-point receptacle assembly and header .025 [0.64] square posts, headers, accessories and tooling ? pages 92-105, 114-140, 145-153, 163: 108-16 action pin contacts 108-25026 ampmodu mod. ii interconnection system, standard pressure receptacle assembly and header application specifications describe requirements for using the product in its intended application, and/or crimping information. they are intended for the packaging and design engineers and the setup person. pc/104 and pc/104- plus connectors ? pages 5-12: 114-13021 pc/104 and pc/104- plus connectors two-piece printed circuit board connectors ? pages 193-202: 114-9009 ampmodu header, two-piece, double row, application of receptacle assemblies, horizontal and vertical board mount ? pages 168-192: 114-25018 ampmodu mod. ii and iv receptacle assembly, pc board mounted, vertical, application of .025 [0.64] square posts, headers, accessories and tooling ? pages 92-105, 114-140, 145-153, 163-167: 114-25028 action pin contacts with tyco electronics headers, application 114-13011 ampmodu .025 and .045 square continuous posts instruction sheets provide instructions for assembling or applying the product. they are intended for the manufacturing assembler or operator. pc/104 and pc/104- plus connectors ? pages 5-12: 408-8502 future board assembly 1424685 for pc/104 and pc/104- plus connectors 408-8503 seating tool assembly 1424686 for pc/104 and pc/104- plus connectors 408-8504 pneumatic seating tool assembly 1424930-1 for pc/104 and pc/104- plus connectors 408-8505 manual seating tool assembly 1424931-1 for pc/104 and pc/104- plus connectors two-piece printed circuit board connectors ? pages 193-202: 408-2636 action pin contact rear insertion/extraction tool 265871-7 408-9054 seating tools receptacle assemblies, horizontal and vertical board mount ? pages 168-192: 408-7411 suggestions for wave soldering vertical ampmodu receptacles .025 [0.64] square posts, headers, accessories and tooling ? pages 92-105, 114-140, 145-153, 163: 408-2636 action pin contact rear insertion/extraction tool 265871-7 408-6944 tyco electronics uninsulated bandolier post insertion tool 91419-1 408-7977 a mpmodu double row, straight posts, end shrouds .100 x .100 [0.64 x 0.64] centers 408-7878 ampmodu header barrier inserts 408-9054 action pin contact headers seating tool, 91170 series 408-9707 tool kit 314818-1 for breakaway headers handbook guide to application of action pin contact connectors 5697 various technical documents are available for your use.
277 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 technical documents for wire-to-board products ampmodu interconnection system note: all part numbers are rohs compliant. technical documents 5 product specifications describe technical performance characteristics and verification tests. they are intended for the design, component and quality engineers. locking clip contacts and housings ? pages 206-209: 108-36028 connector, locking clip, .025 [0.64] square, gold 108-36028-1 connector, locking clip, .025 [0.64] square, tin mod. iv wire-applied contacts and housings ? pages 210-220: 108-25007 ampmodu mod. v interconnection system, wire-applied (high pressure) 108-25019 ampmodu mod. iv male connectors 108-25020 ampmodu mod. iv interconnection system, (standard pressure) 108-25021 ampmodu mod. iv.v interconnection system, (intermediate pressure) short-point wire-applied contacts and housings ? pages 221-224: 108-1472 short-point contacts and housings ampmodu mte interconnection system ? pages 225-252: 108-25034 ampmodu mte connectors ampmodu mt and shielded mt interconnection system ? pages 255-265: 108-25015 ampmodu mt standard pressure connectors 108-25018 ampmodu mt high pressure connectors 108-25030 ampmodu mt shielding accessories ampmodu level v, idc connectors ? 108-25028 interconnection system, insulation displacement connector, idc level mini-tandem spring receptacle contacts ? pages 266-269: 108-25031 tandem spring receptacle contact application specifications describe requirements for using the product in its intended application, and/or crimping information. they are intended for the packaging and design engineers and the setup person. locking clip contacts and housings ? pages 206-209: 114-25006 contact, locking clip, .025 [0.64] square, application of mod. iv wire-applied contacts and housings ? pages 210-220: 114-25003 ampmodu mod. iv (standard pressure), ampmodu mod. iv.v (intermediate pressure) and ampmodu mod. v (high pressure) receptacle contacts, application of 114-25016 ampmodu mod. iv crimp pin contact short-point wire-applied contacts and housings ? pages 221-224: 114-25038 short-point contacts and housings ampmodu mte interconnection system ? pages 225-252: 114-25026 ampmodu mte interconnection system ampmodu mt and shielded mt interconnection system ? pages 255-265: 114-25032 ampmodu mt interconnection system and shielding accessories, application of ampmodu level v, idc connectors ? 114-25020 interconnection system, idc level v, application of mini-tandem spring receptacle contacts ? pages 266-269: 114-25021 tandem spring receptacle contact, application of various technical documents are available for your use.
278 catalog 1307819 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 8-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 technical documents for wire-to-board products (continued) ampmodu interconnection system note: all part numbers are rohs compliant. technical documents 5 instruction sheets provide instructions for assembling or applying the product. they are intended for the manufacturing assembler or operator. locking clip contacts and housings ? pages 206-209: 408-7604 tyco electronics extraction tool 91084-1 408-7606 tyco electronics locking clip contacts and connectors 408-7627 tyco electronics hand crimp tool 90295-1, 28-30 awg wire 408-8547 tyco electronics hand crimp tool 91533-1, 22-26 awg wire 408-9388 tyco electronics hand crimp tool 90431-1, 20 awg wire mod. iv wire-applied contacts and housings ? pages 210-220: 408-4379 tyco electronics pro-crimper ii hand tool 408-7935 ampmodu receptacle connectors with strain relief/pull tabs 408-8547 tyco electronics hand tool 91516-1, 91517-1 and 91541-1 408-9451 tyco electr onics extraction tool 843473-1 for ampmodu wire-applied housings 86308 408-9453 tyco electronics extraction tools 843996 and 843477 for removing ampmodu crimp snap-in receptacle contacts from wire-applied housings ampmodu mte interconnection system ? pages 225-252: 409-5746 tyco electronics electric power unit 931800-1 409-5832 mte ribbon cable terminator 856002-1 408-6789 tyco electronics pneumatic pistol handle 58075-1 408-6790 tyco electronics manual pistol handle 58074-1 408-6919 ampmodu mte connectors 408-8547 tyco electronics hand crimp tool 91518-1 and 91551-1 408-9230 tyco electronics keying tool 91417-1 408-9359 mte modular terminating head 58336-1 408-9393 tyco electronics pneumatic bench assy. 58338-1 408-9407 tyco electronics hand crimp tool 91531-1 and 58342-2 408-9453 tyco electronics extraction tools 843996 and 843477 for removing ampmodu crimp snap-in receptacle contacts from wire-applied housings 408-9515 ribbon cable notcher 854449-[] ampmodu mt and shielded mt interconnection system ? pages 255-265: 408-6532 ampmodu mt connectors ampmodu level v, idc connectors ? 408-6843 tyco electronics extraction tool 91409-1 standard tandem spring and mini-tandem spring receptacle contacts ? pages 266-269: 408-7909 tyco electronics hand crimping tool 91540-1

▲Up To Search▲

Price & Availability of 2-87631-5

	To Download 2-87631-5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .